Used Asv Pt 100 for sale (73,679)

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Caodpovb Hanefx Abbja Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Scanning head Casdpfxeh D Ry Nj Abboa (28260) Make Heidenhain Type LIDA 20/100

Condition: good (used), AGEO SP 60/1000 Four-column press -CE marking -Year of manufacture 1998 -Press force 60 tons -Four guide columns -Hydraulic return stroke -Light gap between columns 1000 mm -T-slot table 900x700 mm -Height clearance 415 mm Codpfxewqx Eao Abboaa Dimensions: LxWxH 1.8x1.6x2.5 meters / weight 3.5 tons Subject to errors / input mistakes

Condition: new, axle configuration: 3 axles, loading space volume: 15 m³, total length: 10,200 mm, total width: 2,500 mm, total height: 3,940 mm, suspension: air, tire size: 275/75R22,5, wheelbase: 7,020 mm, color: white, Year of construction: 2024, = Additional Options and Equipment = - Air suspension - Central lubrication = Notes = The Wattsnew E-Box concrete mixer is an electrically powered concrete mixer. The drive unit (E-Box) is installed in place of the diesel engine and supplies power to the existing hydraulic pump as usual. Everything else remains the same, except the hydraulic pump is now driven by an electric motor instead of a combustion engine. You can also easily electrify your existing concrete mixer trailer by removing the diesel engine unit and installing the E-Box. Thanks to its intelligent software, the E-Box consumes little power and is extremely easy to operate. The entire system is controlled via a single button and lever. Even the charging process is simple: after a day’s work, just connect the E-Box to a charging station or a standard power outlet, and the batteries will be fully charged within five hours. The Wattsnew E-Box is completely emission-free. This means no air pollution from diesel exhaust, so you can work in a clean and safe environment. Residents will also appreciate the fact that you are using an emission-free and quieter machine. Using electric vehicles and machines in the construction industry increases your chances of securing contracts, as customers and government bodies are increasingly demanding emission-free equipment. Further Information: = Additional Information = General Information Year of manufacture: 2024 Applications: Construction and roadworks Material to be processed: Concrete Registration number: OT-93-FF Axle Configuration Tyre size: 275/75R22.5 Suspension: Air suspension Rear axle 1: Dual wheels; alloy rims; max. axle load: 10,000 kg; steered; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Rear axle 2: Dual wheels; alloy rims; max. axle load: 10,000 kg; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Rear axle 3: Dual wheels; alloy rims; max. axle load: 10,000 kg; steered; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Weights Unladen weight: 11,440 kg Payload: 31,560 kg Gross vehicle weight: 43,000 kg Caodpfx Abexv Ry Robja Functional Body brand: Stetter AM 15000 Number of chambers: 1 Water installation: Yes Water tank: 500 l Hoses: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Financial Information Price: On request = Company Information = View our full range at:

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2350 mm distance table/ram, max. stroke up, adjustment up 1200 mm distance between cutting impact cushioning 1600 mm Distance table/ram, stroke up 1200 mm stroke 800 mm table surface area 2060 x 1260 mm table height over floor 750 mm Die cushion pressure in table 100 t Die cushion stroke in table 400 mm die cushion area 1250 x 1000 mm Caedpfsvuugvjx Abbsa side window 780 mm ram surface 2200 x 1500 mm Capacity of ejector in ram 63 t speed down 500 mm/s speed up 310 / 410 mm/s working speed 20 - 73 mm/s quantity of oil 3900 l power requirement 80,0 + 45,0 kW weight 55,0 t Dimensions (WxDxH) 4,6 x 2,7 x 7,2 m Height above floor 6,0 m Height below floor 1,2 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, hydraulic ram interlocking can be offered without putting into operation (partly dismantled, in need of overhaul) or alternatively with overhaul and new control Siemens S 7-1500 F

Condition: used, HERBOLD granulator type SMS 60/100 Heavy version Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm width (optionally as open 3- or 7-blade rotor) Codpsxgtm Ujfx Abbeaa Drive motor 110 kw Folding device with electric winch

Condition: excellent (used), Year of construction: 2009, Arburg 370S 700-100/100 / 2K machine / operating hours: 33.544 in automatic mode / very good technical condition Year of manufacture: 2009 injection unit: Screw diameter: 30 mm injection weight: 65 g Injection pressure: 1390 bar Metering volume: 71 ccm Clamping unit: clamping force: 70 t tie bar distance: 370x370 mm size of clamping platens: 510x510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: 2K machine Cajdpfxexz Atms Abbea Operating hours: 33.544 in automatic mode Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 2 Control with hot runners Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements The vertical injection unit - screw diameter fi 20 mm (29 g/hp) Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) Machine with the built-in conveyor belt Arburg and original sorting flap There is a possibility to buy an original Weber turntable It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer Dimensions: Weight: 4440 kg Length/width/height: 3.48x1.58x2.97 m Drive: Pumps/motor: 15 kW Heating power: 4,9 kW Total power: 19,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Pallet rack, heavy-duty rack, high-bay rack, boltless rack, storage rack upright, pallet rack crossbeam, rungs for pallet rack, shelf support, pallet support, support rungs, spacer -Rungs: for pallet rack, shelf support, spacer -Shelf depth: 1100 mm -Dimensions total: 1105/70/H45 mm -Number: 780 rungs available -Price: per piece, minimum order 10 pieces. Cjdpfxsxakxhe Abbsaa -Dimensions total: 1105/70/H45 mm -Weight: 3.4 kg/piece

Year of construction: 2002, condition: used, This listing is for the Ehret STE 1610/2/100 Sterilising Oven. The unit is in full working condition and is ready for immediate use. Overview The Ehret STE 1610/2/100 Sterilising Oven is a high-performance dry heat sterilizer designed for reliable and consistent sterilization of laboratory and pharmaceutical materials. Manufactured by Ehret, a trusted German brand in thermal processing equipment, the STE 1610/2/100 delivers precise temperature control and robust performance, making it ideal for applications requiring sterilization without moisture, such as glassware, metal instruments, and heat-stable laboratory components. Key Features Precise Dry Heat Sterilization High-Temperature Range: Operates up to 250 °C, suitable for complete sterilization and thermal decontamination. Uniform Temperature Distribution: Advanced air circulation ensures even heat distribution throughout the chamber. Validated Sterilization Cycles: Ideal for sterilizing glass, metal tools, and other heat-resistant materials with accuracy and repeatability. Robust Construction & Ergonomic Design Durable Stainless Steel Chamber: Corrosion-resistant and easy to clean, suitable for repeated sterilization cycles. User-Friendly Controls: Digital temperature controller with display for accurate setpoint adjustment and monitoring. Safety Features: Over-temperature protection, door interlock, and visual/audio alarms for enhanced operational safety. Technical Specifications Model: STE 1610/2/100 Temperature Range: Ambient +5 °C to 250 °C Cedoxhflxopfx Abbeaa Chamber Volume: Approx. 100 litres Heating Method: Electrically heated with forced air circulation Temperature Control Accuracy: ±1 °C Construction: Stainless steel inner chamber; powder-coated steel exterior Control System: Digital PID controller with safety cut-off and time functions Power Supply: 230 V / 50–60 Hz (depending on configuration) Applications Pharmaceutical Laboratories: Dry sterilization of vials, stoppers, and instruments Medical Facilities: Sterilizing surgical tools, metal parts, and reusable components Research & Diagnostics: Sterilization of labware and experimental setups Industrial & QA Labs: Heat treatment, drying, and thermal conditioning of materials System Components Electrically heated drying/sterilization chamber Forced air circulation fan for uniform heating Digital control panel with setpoint and actual temperature display Safety thermostat with alarm system Removable shelving for flexible loading Quality Assurance All Ehret STE ovens are manufactured in compliance with DIN and ISO standards and undergo rigorous quality testing at the factory. Designed for reliable long-term use, the units support calibration, validation (IQ/OQ), and GMP documentation where required. Benefits Reliable Sterilization: Proven performance across thousands of cycles Accurate & Uniform Heating: Ensures consistent results and safe sterilization Low Maintenance: Durable components and easy-to-clean surfaces Safety-Compliant: Built with laboratory and industrial safety standards in mind Compact Footprint: Fits easily into lab or cleanroom environments Conclusion The Ehret STE 1610/2/100 Sterilising Oven is a dependable, precision-controlled dry heat sterilizer built for modern lab and pharmaceutical environments. Its combination of German engineering, validated performance, and operator-friendly design makes it a trusted solution for high-integrity sterilization processes.

Condition: good (used), functionality: fully functional, A fuel transfer device is being offered for sale. Inspection possible by appointment. Manufacturer: GL GmbH Metall- und Werkstattechnik − Model: 100/100 S − Serial number: 3448 − Year of manufacture: 08/2017 − Technical data: Cajdpfx Aboxt H Ileboa > Tank capacity: 100 litres > Delivery rate: 15 l/min > Weight: 92 kg > Fill level indicator: visual > Mobility: mobile > Switching suction/return filling: Single-lever operation/ball valve > Tank change: manual

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm Cjdpjcmr D Hofx Abbjaa control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Caedpfxjxb Aggs Abboa Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: excellent (used), Year of construction: 2016, Arburg 570C 2000-350/150 / Production Line with Side-mounted Arburg Multilift Robot / 2K Machine Year of Manufacture: 2003 Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Casdpfx Absxz Aczjbea Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with side-mounted Arburg Multilift robot 2K (two-component) machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner integration Reinforced injection units – bimetallic Proportional valves on injection units – precision injection Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 1999, Transnorm belt conveyor 800-600-500 RA2041 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Caodpfjk Au A Usx Abbja Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 800 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 545 mm Motor type: SEW motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,02 m/s Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: Supports Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2019, condition: ready for operation (used), Additional Equipment Measuring head incl. 1 measuring probe with probe tip (4mm) Measuring head incl. 1 measuring probe with probe tip (4mm) CAD add-on software Extension cable Mouse, keyboard, and user manual in English and German Caedpfxoxpyrps Abboa This KEYENCE XM-1000 was manufactured in 2019. A reliable CMM machine, it offers precise dimensional measurement for quality control in manufacturing. Consider the opportunity to buy this KEYENCE XM-1000 CMM machine. Contact us for more information about this machine. Application Types Measuring

Condition: used, Year of construction: 1980, pressure 100 t stroke 20 - 200 mm no. of strokes 20 - 60 /min distance between columns 1230 mm dayligth (stroke and adjustment up) 650 mm column travel -side 540 mm table surface area 1050 x 750 mm table height over floor 760 mm ram surface 1000 x 750 mm ram adjustment 100 mm power requirement 18,0 kW Weight 20,5 t Csdpfx Abevuk H Eebsaa dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic hydraulic clutch/brake combination (Desch), hydraulic overload protection in ram, semi-automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric circular oil lubrication, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: good (used), Polin 100 Planetary mixer Caedpfxew H Dwyj Abbja Planetary mixer, 100L stainless bowl, beater attachment, adjustable speed and timer controls, auto lift, programmable for different recipes, 3Ph

Condition: used, Granulator / Granulators Manufacturer: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with a replaceable third bed knife (deflector) for processing thick-walled materials. Inlet hopper suitable for conveyor belt feeding. Rotor mounted outside of the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: rotor and stator knives are positioned opposite each other and cut in a scissor-like manner. With base frame including vibration dampers. Caodsxb Adlopfx Abbea Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Caedpjxz Ab Dofx Abbea Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: new, Year of construction: 2024, neu 2024 7315 prompt, Zwischenverkauf v Türkei 16100 € 278.4 € 1 14500 € 100 to fix 300 mm Cjdpfx Aswiql Asbbeaa 680 mm 1020 mm 8 mm/s 5 mm/s 10 mm/s 500x1020 mm 100 mm 190 mm 2110 mm 1000 mm 2350 mm 1985 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 HAND CONTROL AND FOOT PEDAL table height adjustable according to CE regulations user manual in GERMAN and ENGLISH

Condition: used, mileage: 1,096 km, power: 90 kW (122.37 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,030 mm, first registration: 06/2023, color: white, number of seats: 3, number of previous owners: 2, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, traction control, = Further Options and Accessories = - Air conditioning - Right-hand side sliding door - Android Auto - Apple CarPlay - Heated exterior mirrors - Bluetooth hands-free system - Front electric windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Hill-hold control - Wooden loading floor - Height-adjustable driver's seat - Height-adjustable steering wheel - Multifunction steering wheel - Multimedia compatibility - Radio - Radio with DAB - Reversing camera - Immobiliser - Rear traffic alert - Partition wall = Further Information = General Information Number of doors: 5 Model range: July 2020 – Feb. 2024 Cab type: standard Drivetrain Range: 271 km Transmission Transmission: 1-speed automatic Performance Maximum speed: 100 km/h Dimensions Length/Height: L3H2 Dimensions (L x W x H): 600 x 205 x 257 cm Weights Cedpfxjxn S Uts Abbsaa Unladen weight: 2,710 kg Payload: 790 kg Gross vehicle weight: 3,500 kg Battery Battery status: Owned Battery capacity: 79 kWh Battery charging: Type 2 Fast charging: Combined Charging System Interior Interior: black Consumption Average electricity consumption: 33.5 kWh/100km Maintenance, History, and Condition APK (roadworthiness test): valid until 06.2027 Number of keys: 2 (1 remote control) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: excellent (used), CATALOG NUMBER 7751 TECHNICAL DATA - Track width: 250mm - Working width of roller: 250mm - Max blade diameter: 300mm - Blade bore diameter: 60mm - Max cutting height: 100mm - Table width with extension: 520mm - Table length: 1580mm *from above: - pawls: 2 rows - metal pressure slip roller - shaft with saw blades - smooth metal slip roller *from below: - slip roller - guide rail - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 0.75kW Cjdpfxjxft Dwe Abbjaa - main motor: 15kW - extraction port diameter: 200mm - overall dimensions L/W/H: 1640x1400x1550mm - weight: 1000kg ADVANTAGES – Italian manufacture – in very good condition – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (if there are significant exchange rate fluctuations, the price may change)

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, heavy-duty trailers Caodperd Aclefx Abbea -Platform: 11,000/3000/H1100 mm -Load capacity: 100 tons -Steering: possible on both sides -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel size: 646/200-480 -Dimensions total: 12,300/3000/H1100 mm -Weight: 12960 kg -Handover: in the current condition as viewed -Note: Pay attention to the condition of the wheels

Condition: excellent (used), Year of construction: 2008, turning length: 4,000 mm, turning diameter: 1,100 mm, Chuck Size 635 mm Bar Capacity 105.92 mm Swing 1,066.8 mm Machining Length 3,987.8 mm Control CNC (FANUC) Caedexv A Dnjpfx Abboa

Condition: like new (used), Year of construction: 2008, operating hours: 56,000 h, functionality: fully functional, machine/vehicle number: 170722, screw diameter: 25 mm, Technical data Manufacturer Engel Type e-max 310/100 Serial number 170722 Year of construction 2008 Operating hours approx. 56034 and approx. 58,000 Dimensions L/W/H 4.7 x 1.2 x 1.9 mtr. Weight 4400 kg Fully functional Condition very well maintained Special Control unit cc 200 Auger ⌀ 25 mm Injection weight 55 gr. Injection pressure 2400 Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm Mold mounting height 150 - 450 mm Opening stroke 350 mm Ejector stroke/force 100 mm /24 kN Hydraulic clamping unit Motor power 16 kW Heating capacity 9.2 KW /4 zones Total output 25.2 KW The machine is available from September in our warehouse in Hanover/Germany and has been tested. Cedet U Agmepfx Abbsaa Extras core pull full-electric drive Tool heating 12 ejector plate safety device German and English screen language incl. complete documentation guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover/Germany