Used Tos W 100 A for sale (88,188)

Condition: ready for operation (used), Year of construction: 1999, overall weight: 70 kg, number of axes: 5, This 5-axis TOS VARNSDORF W 100 A was manufactured in 1999. It operates on a voltage of 3PE ~ 400 V, with a frequency of 50 Hz and a current of 22 A. The machine's power capacity is 15 kVA, and it weighs 70 kg. Consider the opportunity to buy this TOS VARNSDORF W 100 A horizontal machining centre. Contact us for more information. • Voltage: 3PE ~ 400 V • Frequency: 50 Hz • Current: 22 A Djdpfx Aeyblnuofnjkh • Power: 15 kVA • Control voltage: 24 V

Condition: excellent (used), Year of construction: 1998, CN Heidenhain TNC 430 PA Maximum spindle torque: 900 Nm Maximum feed force in the X, Y, Z axes: 25,000 N Maximum workpiece weight: 2,500 kg (at 1 m table length) Table dimensions: 1,000 × 14,000 mm Number of T-slots in the table: 7 T-slot width × spacing: 22H7 × 140 mm Longitudinal travel (X): 12,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 1,500 mm Horizontal spindle: Minimum distance between the horizontal spindle axis and table surface: 275 mm Maximum distance between the horizontal spindle axis and table surface: 1,775 mm Vertical spindle: Minimum distance between the vertical spindle face and the table: 50 mm Maximum distance between the vertical spindle face and the table: 1,550 mm Spindle taper: ISO 50 Spindle diameter: 85 mm Dkedpexdwkfofx Afneh Tool clamping force in the spindle: 16,500 N Main machine dimensions: Length: 17,850 mm Width: 5,640 mm Width with enclosure: 6,720 mm Height: 4,350 mm Floor space required: 73 m² Total machine weight: approx. 34,000 kg Electrical cabinet weight: approx. 820 kg Mains voltage: 50 V (3 × 400) Total machine power: 100 kVA Fuses to be provided by the customer outside the machine for 400 V Hydraulic unit weight without oil: 150 kg

Condition: excellent (used), Year of construction: 1982, Table size: 1250x1250 Djdpjyghnhefx Afnokh Spindle diameter: 100mm Cross: 1600mm

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, torque: 1,200 Nm, controller manufacturer: SIEMENS SINUMERIK 840D, workpiece weight (max.): 18,000 kg, total height: 4,950 mm, total length: 10,270 mm, total width: 5,640 mm, table width: 1,000 mm, table height: 800 mm, table length: 6,000 mm, table load: 18,000 kg, rotational speed (min.): 16 rpm, rotational speed (max.): 3,200 rpm, overall weight: 21,000 kg, spindle speed (max.): 3,200 rpm, spindle motor power: 22,000 W, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FFQ 100W-A6(A8) CNC – TOS KUŘIM Dodpfx Aexp Iz Sjfnskh Machining Center, Table Length 6m (8m) Control System: Siemens 840 C Availability: According to selected refurbishment Warranty: According to selected refurbishment Can be supplied as used, after medium repair, or after general overhaul, including modernization. FFQ 100W-A6(A8) CNC – Technical Specifications: Basic Machine Data: Manufacturer: TOS Kuřim Overall Length: 10,270 mm Overall Width: 5,640 mm Overall Height: 4,950 mm Total Weight: 21,000 kg Total Connected Load: 40 kVA Working Range: Longitudinal Travel X-axis: 4,000 mm (6,000 mm) Cross Travel Z-axis: 1,000 mm Vertical Travel Y-axis: 1,400 mm Horizontal Spindle Head with Extendable Quill: Tool Taper per ČSN 22 0433 ISO 50 Max. Power: 22 kW Speed Range: 16 – 3,200 rpm Number of Speed Steps: Infinitely variable Max. Torque: 1,200 Nm Quill Diameter: 170 mm Quill Extension: 400 mm Quill Working Feed Range: 1 - 2,000 mm/min Quill Rapid Traverse: 4,000 mm/min Max. Quill Feed Force: 10,000 N Spindle Head (IPS head): Tool Taper per ČSN 22 0433 ISO 50 Max. Power: 22 kW Speed Range: 16 – 3,200 rpm Number of Speed Steps: Infinitely variable Max. Torque: 1,200 Nm Machining H-V, spindle automatically adjustable to vertical or horizontal position Feed Range X – Y / Z: Number of Steps / Range: Infinitely variable / 1 – 5,000 mm/min Rapid Traverse Y – Z / X: 10,000 / 15,000 mm/min Table: Table Area: 1,000 x 6,000 mm (8,000 mm) Max. Load: 3,000 kg/m2 Tool Magazine: Number of Positions: 40 pcs Control System: SIEMENS 840 C Details upon request.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,400 mm, This 3-axis TOS KUŘIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUŘIM FS 100 S/A3 vertical machining centre. Contact us for more information. Additional equipment Dodpoyar A Aofx Afnekh • Additional Documentation: User manual available Machine Benefits Technical Machine Benefits • Feed rates: standard: 1 to 5000 mm/min / rapid traverse (y and z axes): 10 m/min/ feed rate: 12 m/min • Worktable: size: 1000 x 3000 mm / maximum workpiece weight: 7000 kg / number of t-slots: 7 / distance between t-slots: 140 mm / t-slot width: 22 mm / table height from the base (floor): 900 mm • Spindle: spindle taper: iso 50 / spindle diameter at the front bearing: 85 mm / minimum spindle distance from the worktable: 125 mm / maximum spindle distance from the worktable: 1775 mm / spindle speed: 16 to 3500 rpm (stepless)

Condition: used, Year of construction: 1998, functionality: fully functional, Tabulka 1800 x 1800 mm Průměr vřetena 130 mm Osy X x Y x Z ... 2000 x 2000 x 800 mm Vřeteno 800 ot/min Max. zatížení stolu 12 t Strojní dimesniony 6700 x 6000 x 4420 mm Hmotnost stroje 32 000 kg Řídicí systém MEFI 872 Series. Přestavěn v roce 1998. Dkodpfx Aowhpv Refneh

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, torque: 1,200 Nm, controller manufacturer: Heidenhain iTNC 426, workpiece weight (max.): 9,000 kg, total height: 3,320 mm, total length: 9,660 mm, total width: 4,918 mm, spindle speed (min.): 11 rpm, spindle speed (max.): 2,500 rpm, The machine is currently disassembled and is undergoing refurbishment with the following scope of work: Dkjdpfxjxnkkaj Afneh - Complete disassembly and cleaning - Inspection of all components - New Tribotec lubrication unit - Overhaul of the dedicated console balancing circuit - Milling head “O” – complete overhaul including replacement of gears - Replacement of the gearbox bearings - Replacement of belts - Repair of ball screws and their bearings - Resealing of the machine’s hydraulic circuits and replacement of solenoid valves - Addition of automatic gear lubrication in the milling head - Resealing of all hydraulic cylinders and modernization of seals - Overhaul of the hydraulic power unit - Overhaul of Indramat feed motors and the spindle motor - Repair and adjustment of Indramat drives - Overhaul of the electrical cabinet including control elements - Replacement and modernization of limit switches throughout the machine - Repair or replacement of Heidenhain system cables and TNC 426 - Overhaul of the control panel - Overhaul of the Heidenhain TNC 426 control system, including keyboard and display unit - The machine will be fully functional and delivered with geometric accuracy documented by protocol - New machine paint in RAL 5005 and RAL 9010 color scheme. Technical Data Maximum spindle torque: 1,200 Nm Maximum feed force in X, Y, Z axes: 20,000 N Maximum workpiece weight: 9,000 kg Total table area: 1,000 x 4,000 mm Number of T-slots/table pitch: 7/140 mm Slot width: 24H7 mm Table height from base: 900 mm Longitudinal travel (X): 4,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 900 mm Minimum distance from horizontal spindle axis to table clamping surface: 150 mm Maximum distance from horizontal spindle axis to table clamping surface: 1,500 mm Minimum distance from vertical spindle nose to table clamping surface: 130 mm Maximum distance from vertical spindle nose to table clamping surface: 1,030 mm Distance from horizontal spindle nose to inner table edge: 80 mm Distance from vertical spindle axis to inner table edge: 100 mm Spindle taper: ISO 50 Retraction force of clamping mechanism: 16,100 N Horizontal spindle swiveling – bilateral: 180° Vertical spindle swiveling – bilateral: 180° Spindle head positioning: adjustable in 2.5° increments Usable power of main drive motor: 22 kW Spindle speed range: 11 to 2,500 rpm Number of spindle speed steps: stepless Feed rate range: 1 to 5,000 mm/min Rapid traverse in Y, Z axes: 10 m/min Rapid traverse in X axis: 10 m/min Machine available for delivery at the end of 2025.

Condition: used, Year of construction: 1981, year of last overhaul: 2007, Machine after CNC modernization - control system MEFI CNC 872 - 3 continuously controlled axes. Videos of the machine in operation and an accuracy protocol (very precise) are available. X-axis: 3500 mm Y-axis: 2000 mm Z-axis: 1250 mm W-axis: 800 mm Spindle: 130 mm, ISO 50 Spindle speed: 800/min. Table clamping size: 1600x1800 mm Dksdpfx Afjx Rb Rronjh

Condition: ready for operation (used), Year of construction: 2001, CNC milling machine TOS TV-1000 A CONTUR Dedohlp Iwopfx Afnokh Manufacturer: Trens Model: MC 100 VA Year of construction: 2001 Condition: used Control unit: Heidenhain TNC 426 X-axis travel: 1000mm Y-axis travel: 600mm Z-axis travel: 760mm Table length: 1080mm Table width: 580mm Tool changer with 40 positions Tool holder according to ISO 40 Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg Shipping possible throughout Germany and Austria. Surcharge 1000 € Sale excluding warranty.

Condition: good (used), Year of construction: 2001, TOS TV-1000 A CONTUR MV 100 VA CNC machining centre Manufacturer: Trens Model: MC 100 VA Year of manufacture: 2001 Control: Heidenhain TNC 410 X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 760 mm Table length: 1080 mm Table width: 580 mm Dsdpfx Afexx Ndmenekh Tool changer with 40 positions Tool holder according to ISO 40 Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1746, shaft length: 10,564 mm, laser power: 100 W, type of cooling: air, working range: 1,750 mm, overall weight: 205 kg, table height: 1,760 mm, table length: 12,000 mm, table width: 9,200 mm, Equipment: cabin, Used fiber laser system for laser marking, engraving, marking, and microstructuring on metals and plastics. Ex-display machine, laser class 1, CE-compliant, Made in Germany. Laser & Beam Source - IPG Ytterbium fiber laser - Power: 100 W - Wavelength: 10564 nm Djdoyfvhgopfx Afnjkh - Pulse energy: 0.2–1.0 mJ - Cooling: Air-cooled, no external cooling required - Power supply: 230 V / 50 Hz - Scanner: X-Y galvanometer with mirror mount for 1064 nm Note: Manufacturer’s lab values; actual values may vary depending on the application. Scanner & Control - F-Theta lens: f = 254 mm, anti-reflection protective glass - Marking field: 175 × 175 mm - Max. scan speed: 4 m/s Industrial PC with Windows 11 Pro, SSD storage - Controller cards for laser & scanner - Digital & analog interfaces: RS232, Ethernet, USB - Custom adaptations optional - 19" TFT color monitor, keyboard & mouse - SK CONTROL software - Industrial software for texts, logos, QR codes, variable data - Intuitive user interface, logo/photo import via mouse click - Job management and parameter library for reproducible quality - Pilot laser displays laser position as red rectangle Workstation 1 – SK LASER - Enclosed laser class 1 workstation - Combined sitting/standing workstation - Aluminum profile housing, front door with laser safety glass, bright work lighting - Dimensions: H 1760 × W 920 × D 1200 mm - Stainless steel worktop with 25-mm hole grid, 710 × 400 mm - Motorized Z-axis, travel 500 mm (gross) - Rear door for oversized workpieces (when open: laser class 4) - Extraction nozzle DN50 for fume extraction - Redundant safety equipment: emergency stop, interlock, safety relay performance level 4 - Operating temperature: 15–35°C - Connection load: 230 V / 50 Hz Condition & Delivery - Ex-display, tested machine - Optionally: Delivery including commissioning within Germany

Condition: ready for operation (used), Grundfos SPK2-15 / 8X A-W-A-CVUV submersible pump SN:64812211001 with MG71A2-14FT85-B motor, used, normal signs of use, 100% functional, scope of delivery as per photos Dkedelcf Nzepfx Afnoh

Condition: used, mileage: 41,262 km, power: 125 kW (169.95 HP), first registration: 05/1993, overall weight: 9,000 kg, fuel type: diesel, color: green, gearing type: mechanical, loading space width: 2,330 mm, loading space length: 4,500 mm, loading space height: 1,920 mm, total length: 6,440 mm, total width: 2,500 mm, total height: 3,600 mm, number of seats: 2, Equipment: ABS, all wheel drive, parking heater, +++ H certificate as special purpose vehicle (SoKFZ) for office use possible +++ Dsdpfovbnwusx Afnekh MB 917 with selectable all-wheel drive 4x4 and off-road reduction, 2 differential locks Insulated 4.6m police radio box body with real glass sliding windows, 2 staircases The box body is spring-mounted, allowing chassis torsion during off-road travel Additionally features a roof hatch as well as two exterior doors with retractable or folding stairs External 220V power intake, second battery set, storage boxes Includes mobile 2 kVA generator on sliding tray The cab is equipped with individual seats; a center third seat can be retrofitted. Also features ABS and power steering, making the truck easy to drive Thanks to the long axle ratio, a top speed of 100 km/h (GPS) is achieved The vehicle has been continuously maintained and is immediately ready for use—the starter batteries are new It offers an excellent base for further conversion into a motorhome Box body interior dimensions: 4500 x 2330 x 1920 mm (LxWxH) Engine: OM 366. Manual 5-speed gearbox 714056 Wheelbase: 3640 mm Downrating to 7490 kg is possible; to achieve an unladen weight of 7.0 t, equipment must be removed accordingly Unladen weight without box interior and roof platform/roof storage box: approx. 6.2 t + 206 +

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Djdpew Emyzefx Afnokh

Condition: excellent (used), Year of construction: 2010, 1. Gas burner WEISHAUPT WM-G30/2-A --- 4100 kW, with DUNGS gas train DN65 Output: 450–4100 kW Version: ZM Dodpfx Aswg Hkcofnjkh Year of manufacture: 2010 2. Gas burner WEISHAUPT G50/1-B - 4000 kW, with DUNGS gas train DN65 Output: 550–4000 kW Version: ZM-NR Year of manufacture: 2004

Condition: excellent (used), Year of construction: 2020, 1. Dksdpfjwgyrtox Afnoh WEISCHAUPT WM-G10/4-A (with gas line) - Power: 100-1100 kW - Model: ZM-LN - Year of manufacture: 2020 2. WEISCHAUPT WM-G10/3-A (with gas line) - Power: 100-1000 kW - Model: ZM - Year of manufacture: 2013

Condition: excellent (used), Year of construction: 2009, Horizon Brochure System Collating Machine Horizon VAC 100a, VAC 100c Number of Stations: 2 x 10 Max. Format: 500 x 350 mm Min. Format: 148 x 120 mm Loading Capacity: 55 mm per station Speed: up to 9,500 cycles/h Weight: 320 kg per tower Machine Dimensions: 810 x 652 x 1,961 mm Power Supply: 230 V, 10.6 A, 2.3 kW Staple-Fold Station SPF 200A Djdpfx Afoyhzubenjkh Feed Format (4-page sheets): min. 180 x 105 mm, max. 508 x 356 mm Final Brochure Format: min. 85 x 105 mm, max. 250 x 356 mm Brochure Thickness: up to 25 sheets, 100 pages Speed: up to 4,800 cycles/h Weight: 782 kg (with front trimmer FC-200A) Machine Dimensions: 3,450 x 810 x 1,250 mm (L x W x H) Power Supply: 230 V, 5.3 A, 1.0 kW Trimmer FC 200A

Condition: good (used), Technical data for pallet rack beam: Racking system: SSI Schäfer Type: PR600 Included in delivery: 01x Pallet rack beam, used Material color: RAL 5010 gentian blue Box profile: 100 x 40 mm Beam type: TRV1-270-104-30 CE Bracket: 5 HK (hooks) Clear span: approx. 2,700 mm Max. load per pair of beams: 2,400 kg, with evenly distributed load. Dkjdpfxewp Dzwj Afnsh 02x Safety pins, used Version: completely galvanized For securing the crossbeams Your contacts in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for pick-up. Any desired transport or shipment of this item is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical Data for Pallet Rack Beam: Racking System: Polypal Type: Stockpal Scope of delivery includes: 01x Pallet rack beam, used Design: Top beam Material color: orange Box profile: 100 x 50 mm Type: SKVBN 09850NP22 Connector: 2 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 02x Safety pins, used Version: Fully galvanized For securing the longitudinal beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Djdpfx Aoxzyi Sefnskh General information about the item: This item is only offered for collection. If transport or shipping of this item is required, this will incur additional costs, which can be requested from us depending on the delivery location and scope.

Condition: used, Year of construction: 1988, control Heidenhain 355 tool adaptor SK50 weight of the machine ca. 8 t +++++ Please note: Dodpfx Afjf Tdvbjnskh The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, mileage: 696,997 km, power: 316 kW (429.64 HP), first registration: 10/2020, fuel type: diesel, empty load weight: 14,000 kg, maximum load weight: 12,000 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: retarder, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space volume: 48 m³, loading space length: 7,658 mm, loading space width: 2,463 mm, loading space height: 2,550 mm, number of beds: 1, Equipment: ABS, air conditioning, cooling unit, cruise control, differential lock, electronic stability program (ESP), onboard computer, parking heater, soot filter, tail-lift, traction control, trailer coupling, Yourtrucks Group Dodpjyfftxsfx Afnokh The Yourtrucks Group maintains business relationships around the globe. Both procurement and sales extend beyond national borders, which is why our listings always show the net export price—this price is independent of the location where the vehicle will be used. Yourtrucks GmbH assembles the content of this website with the utmost care and ensures it is regularly updated. The information provided is to be considered non-binding general information and does not replace detailed, individual consultation when making a purchase decision. Only the provisions contained in the purchase contract are binding. Subject to changes, errors, typographical mistakes, and prior sale. Only our general terms and conditions apply.

Condition: used, Year of construction: 2000, Horizontal Boring Mill Manufacturer: TOS Model: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC control: Heidenhain 426 Completely overhauled in 2022 Dksdpfjx A Ayiox Afneh Report available Travel (X/Y/Z): 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Table width: 1,800 mm Clamping area: 1,800 x 1,600 mm Table load capacity: 12 t Number of tool positions: 60 Spindle taper: SK 50 Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Heidenhain handwheel Telescopic guard completely overhauled with new wiper. Dimensions (LxWxH) approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 t

Condition: used, mileage: 603,000 km, power: 200 kW (271.92 HP), first registration: 07/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2026, gearing type: automatic, emission class: euro6, loading space length: 7,780 mm, loading space width: 2,450 mm, loading space height: 2,450 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, MERCEDES BENZ ANTOS 1827 THERMOKING T-1000 R SPECTRUM TAIL LIFT ----VEHICLE HISTORY GERMAN VEHICLE VIDEO AVAILABLE ON REQUEST ----VEHICLE FEATURES ----DRIVER ASSISTANCE & SAFETY * CRUISE CONTROL * SPEED LIMITER * HILL START ASSIST * TRACTION CONTROL (TC) * DIFFERENTIAL LOCK * LANE DEPARTURE WARNING SYSTEM * REVERSING CAMERA ----COMFORT EQUIPMENT * AUXILIARY HEATER * AIR CONDITIONING * SEAT HEATING * MANUAL SUNROOF ----DRIVE & TRANSMISSION * AUTOMATIC TRANSMISSION * ENGINE BRAKE * ADBLUE / BLUETEC 6 ----AXLES AXLE 1 * TYRES: 315/70R22.5 * AIR SUSPENSION Dodpfx Asyfkv Sofnekh AXLE 2 * TYRES: 315/70R22.5 * TWIN TYRES * AIR SUSPENSION ----BOX BODY * YEAR OF MANUFACTURE: 06/2016 INTERIOR DIMENSIONS * LENGTH: 7.78 M * HEIGHT: 2.45 M * WIDTH: 2.45 M SEPARATE CHAMBERS * LEFT CHAMBER: 5.17 M L / 1.65 M W * RIGHT CHAMBER: 6.75 M L / 0.83 M W ----TAIL LIFT * BÄR TAIL LIFT ----IMMEDIATELY AVAILABLE * EXPORT SALES ONLY WITH SECURITY DEPOSIT (MIN. €500) * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 EXPORT CUSTOMS DECLARATION EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS PLATES AND 15 DAYS AUSTRIAN PLATES EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU and third countries, a deposit of at least €500.00 / €1,000.00 is required Changes, errors, and prior sale reserved! You can find more vehicles on our website. Sale is exclusively in accordance with our General Terms and Conditions – see homepage. Important Note / Important Information: Despite careful verification of all details in our offer, errors can still occur. Some may be due to transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute any legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for contract initiation. The information given here is not guaranteed and does not constitute warranted characteristics.

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone. Dkjdpfx Afjxt Hn Sonjh

Condition: excellent (used), For sale: professional tool holder from the renowned brand WNT Germany – model B40 ER16M A=100. The holder is equipped with a Centro-P Germany HPC16MS-DI precision collet, ensuring maximum accuracy and clamping stability. The set also includes a VHM drill, making it ready for immediate use on a CNC machine. Condition: very good, the holder is fully functional, no play, with normal signs of use. Premium-class equipment – ideal for professional machining centers where precision and reliability are crucial. Dksdpfsw Rr A Dsx Afnoh