Used Asv Pt 100 for sale (26,138)

Condition: used, Year of construction: 1999, - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) Panel dividing saw with infeed table and destacking device Manufacturer: Giben Type: Prismatic 2 h100 SPT Year of manufacture: 1999 Technical data - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Clamping chuck opening: 117 mm - Working height: 950 mm - Lifting table dimensions: 1600 x 2700 mm - Max. stack height: 620 mm - Dimensions: 2444 x 1220 mm, 2500 x 1250 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) High-speed saw carriage - 2 guide shafts: 40 mm - Saw carriage drive via frequency-controlled motor - Feed speed: 1 - 100 m/min - Return speed: 100 m/min Adjustment of the saw carriage speed from the control panel. Automatic cutting length control according to the panel dimensions - Scoring saw speed: 5035 rpm - Carbide-tipped saw blade speed: 3760 rpm Djdpszuyywefx Aaxewb - Main saw motor power: 11 kW - Scoring saw motor power: 2.2 kW - Main saw blade: 400 mm - Main saw spindle: 75 mm - Scoring saw blade: 215 mm - Scoring saw adjustment from the outside in stepped increments to: 0.025 mm - Changing the main saw and the scoring saw via a quick-release system (pneumatic) Sliding table - Support table in the sliding table area with free-running roller rails - Top-mounted sliding table with 3 floating clamping chucks with patented, foldable lower clamping chuck fingers - Sliding table drive via servomotor - Drive torque: 6.5 Nm - Feed speed: 1 - 60 m/min - Return speed: 60 m/min - Cable routing via drag chain - 2 front aligners Automatic infeed via lifting table - Dimensions: 1600 x 2700 mm - 4-column spindle lifting table with 12 free-running roller groups - Automatic package height counting when lifting the panels via control - Min. panel dimensions: 2000 x 1200 mm - Max. stack height without pit: 620 mm - Max. load: 12 t - Infeed height: 330 mm Support table - 2 pcs support table with PVC surface 2000 x 510 mm Machine control G-Drive 1D Extraction - 1 extraction port on the pressure bar: 115 mm - 1 extraction port on the lower side of the machine bed: 200 mm - The chip extraction takes place directly at the saw unit via sheet metal ducts into a chip duct arranged along the saw line, which is sealed with flexible rubber lips. Performance parameters - Average cycle time/saw cut: approx. 25 s Quality - Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels) - Angularity: +/- 0.15 mm/m Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ram adjustability: 25 mm Weight: approx. 500 kg Dedpfxjy D Abfs Aaxswb Accessories / Special features: • Adjustable table • Foot release Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Pamasol Small Scale Plant Dwodpfx Aasznwwaoxjb Type: 2005/100 Year: 2015 Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland.

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes all stainless steel mobile Dwodozvbz Eepfx Aaxob adjustable speed with air knives with pressure roler belt width 1000 mm dimensions (l x w x h) : ± 2.800 x 1.850 x 2.500 mm

Condition: used, Year of construction: 2005, The SCREEN PTR 4100, manufactured in 2005, is a dependable computer-to-plate system designed for high-quality plate imaging. With a maximum plate size of 830 x 660 mm, it provides consistent and precise output for professional offset printing environments. This unit is equipped with a Heidelberg Autoloader for efficient plate handling, a Xitron RIP with dongle for accurate workflow and imaging control, and a stacker for streamlined plate management. Currently located in Germany and still in operation at a printshop, the SCREEN PTR 4100 combines robust engineering with automation features, making it a reliable solution for printshops seeking accuracy, productivity, and ease of use in plate production. Format: 830 x 660 mm Max. Size: Plate size: Min 324 x 370 Speed: Speed: approx 10 plates/h Equipment: 4-up Thermal PlateSetter - 16 channel infrared laser diodes Resolution: 2400 dpi Dwsdpfx Asw U Dt Ajaxsb Autolader Including Xitron Rip with dongle Punching device Blower Unit 7846 Hours The diodes are in very good condition, as can be seen in the pictures.

Condition: excellent (used), Accessories: Control system Manufacturer: Allen Bradley Type: Ethernet 10/100 Adapter 1794-AENT (28685 IV) Dsdjx Rqt Nspfx Aaxjwb

Condition: used, Universal tool milling machine Brand: OPTIMUM Dwodpfx Aajw Rlvqexsb Model: MT 100 Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Geometric acceptance with test report Accessories: - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp - Coolant system - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V Dodpfx Aeyc H I Seaxjwb • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, spindle diameter 125 mm x-travel 2000 mm y-travel 1100 mm z-travel SK 50 mm spindle taper Philips 2500 digital readout Pfillips turning speeds 925 U/min spindle stroke 800 mm Table 1000x1400 mm The tech. Data are manufacturer or operator information and therefore non- Dwodpfx Aaoyt R Anoxob binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3000x1070x1200 mm Weight 1150 kg Total power requirement 10 kw Dodpevz Hzxofx Aaxjwb

Condition: excellent (used), Year of construction: 2018, EMCO Concept MILL 55 Year of manufacture 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training with various industrial controls. Machine complete with full enclosure, CE-compliant safety features, continuously variable main drive, automatic reference point approach, machine light, electrical and mechanical preparation for automation, PC interface card, PC-machine connection cable, data storage device with machine data, tool set for operation, operating manual with spare parts list. The interchangeable control system The interchangeable control system, with which all Concept machines can be equipped, is unique. The user is trained on all commercially available CNC industrial controls on a single machine. Currently, up to eight different controls can be learned. The result: CNC technicians can be deployed flexibly. And that's a decisive advantage: for the specialists as well as for the company. Working Area Djdowkpzlopfx Aaxowb • Longitudinal X-axis travel: 190 mm • Transverse Y-axis travel: 140 mm • Vertical Z-axis travel: 260 mm • Min. spindle nose-to-table distance: 77 mm • Max. spindle nose-to-table distance: 337 mm Milling Table • Table dimensions (L x W): 420 x 125 mm • T-slots: Number, width, and spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Milling Spindle Drive • Speed range: 150 - 3500 rpm • Three-phase asynchronous motor power: 0.75 kW • Spindle torque: 3.7 Nm Axes • Working feed: 0 - 2 m/min • Maximum feed force X/Y: 800 N • Maximum feed force Z: 1000 N • Average Positioning range according to VDI 3441 in X/Y: 0.008 mm • Average positioning range according to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection with directional logic • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery Emco Concept Mill 55 with tool changer Cable Easy2Operate WinNC Sinumerik Operate Base Leveling elements I/O expansion Pneumatic expansion Automatic door Pneumatic vise Robotic interface DNC interface W-holder package

Condition: good (used), Temperature controller, temperature sensor, temperature setting -Type: Pt 100 Din -1 package, contents 10 pieces -Weight: 0.8 kg Dwsdjb A S Dtspfx Aaxeb

Condition: good (used), Extremely practical, heavy-duty table, good quality. Welding rotary table, 100 kg load capacity. Maximum load: 100 kg horizontally. Maximum load: 50 kg vertically. Rotation speed: 0.5-9 rpm. Rotation direction: left and right. Rotary table speed: manually adjustable. Rotary table diameter: 345 mm. Rotary table height: 415 mm. Rotary table tilt angle: 0-90°. Motor power during operation: 0.12 kW. Dimensions: 500 x 470 x 415 mm. Dsdpfocctnajx Aaxswb Power supply: AC 110V / 220V 50/60Hz. Optional with jaws, additional cost: 160. Delivery to your doorstep: 80.

Condition: excellent (used), 3-axis visualization Universal spatial head milling machine, “HURON” type, 360° orientation Dwjdpfx Aswlggueaxjb 3-axis visualization Vertical spindle power: 2.2 kW X-axis travel: 600 mm manual / 480 mm automatic Y-axis travel: 270 mm manual Z-axis travel: 380 mm manual / 340 mm automatic Feed rate: 24 – 402 mm/min Number of spindle speeds: 11 Spindle speed: 45 – 1600 rpm Dimensions: 1540 x 1355 x 1650 mm Weight: 1500 kg

Year of construction: 2022, operating hours: 400 h, condition: as good as new (ex-display), functionality: fully functional, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of manufacture: 2022 Operating hours: approx. 400 hrs Location: D 84069 Schierling Availability: short notice Dsdsrt Uvzjpfx Aaxjwb Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 mesh size: 36 mm Screen deck 2 mesh size: 24 mm - Pre-screen deck with large hopper and variable dosing roller - Volume measurement via load - Prepared for air separator - Compressor - LED lighting package - Radio remote control for all key settings - Diesel-electric drive 80 kW - Axle levelling system - Tandem axle, road approval for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recyclables (not suitable for construction rubble or excavated material) Miscellaneous: Very good used condition, fully operational

Condition: excellent (used), For sale is a Karl Süss HR 100 Analyse – a high-end, manual measurement and testing station designed for the analysis and contacting of semiconductor wafers and microelectronic components. The device is used in laboratories, research and development departments, and during scientific research. The station is equipped with a precise measurement table with fine adjustment, a sample holder with a vacuum function, and a mechanical lifting mechanism. It also has connections for compressed air and vacuum, which ensures stable mounting of the components being tested during measurements. Technical data: Manufacturer: Karl Süss Model: HR 100 Analyse Device type: manual testing station (Wafer Probe Station) Application: analysis and testing of semiconductor wafers and microelectronic components Vacuum function for sample mounting Precise measurement table Connections for compressed air and vacuum Condition: used, as shown in the pictures. Dwjdpfx Aaszl H Ayoxeb

Year of construction: 2019, condition: new, Wraparound heat-shinkable MIS - 65 1120 - 650 CW BK/T SP 127030 - 12200650026-040 Dwodpfxeih R Ico Aaxeb Prize per unit carton

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. It has a built‑in PT1000 temperature sensor for temperature compensation. The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. Djdjxv Dv Eepfx Aaxowb It has process connection thread of Pg 13.5, and its connector is of “VP” type This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). - Water/wastewater treatment in situations needing durable, robust probe

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002569 The Mettler Toledo InPro 3253/225/PT1000 is a highly specialized sensor typically used in industrial applications for measuring pH, ORP (oxidation-reduction potential), or temperature in harsh conditions. It is part of the InPro series from Mettler Toledo, which produces high-quality sensors for process automation pH or ORP sensor: The sensor can measure the acidity or alkalinity (pH) or the potential difference between two electrodes (ORP), which is crucial in many industrial processes, like chemical manufacturing, water treatment, and food processing 1. Type: pH or ORP sensor: The sensor can measure the acidity or alkalinity (pH) or the potential difference between two electrodes (ORP), which is crucial in many industrial processes, like chemical manufacturing, water treatment, and food processing. Dwedpfjxv Dwcex Aaxeb 2. Application: This sensor is suitable for liquid measurements in aggressive or challenging environments. It can be used in a variety of industries, including pharmaceuticals, chemicals, water treatment, and food production. 3. Design: The sensor features a robust design with high chemical resistance and high temperature tolerance, making it ideal for environments with aggressive chemicals and fluctuating temperatures. 4. PT1000 Temperature Sensor: The model includes a PT1000 temperature sensor. This is a type of RTD (resistance temperature detector) that measures the temperature of the process. The PT1000 provides accurate temperature compensation for the pH or ORP readings, ensuring more precise measurements. 5. Mounting: The sensor is designed for easy integration into process systems, typically in industrial process pipelines or tanks. It can be installed in-line or submersible, depending on the application. 6. Electrode Material: The electrode material is typically made from high-quality, durable materials like glass or ceramic, ensuring long life and stability even in corrosive environments. 7. Calibration: It usually supports automatic calibration features, making maintenance simpler and enhancing its reliability. 8. Temperature Range: The sensor can measure over a wide temperature range, often from 0°C to 130°C or higher, depending on the specific model and application. 9. Compatibility: It is typically compatible with Mettler Toledo process transmitters and analyzers, ensuring seamless integration into existing monitoring systems. 10. Durability: The sensor is built to handle rugged environments, with high pressure, high flow rates, and vibration resistance, typical in industrial setting

Condition: good (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 11140003483, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 30 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,500 mm, total length: 4,000 mm, total width: 4,000 mm, table width: 795 mm, table length: 1,500 mm, rotary table diameter: 800 mm, overall weight: 8,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 15,103 h, number of slots in tool magazine: 32, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 50 A, DECKEL MAHO DMU 100 T Universal Machining Center - Positioning speed X/Y/Z: 20 - 2000 mm/min - Measuring system resolution X/Y/Z: 0.001 mm - Positioning accuracy X/Y/Z: 0.010 mm - Tool holder: SK 40 - Max. tool diameter when all positions in magazine 1 are occupied: 130 mm / magazine 2: 80 mm - Max. tool length from spindle nose: 315 mm - Max. tool weight for automatic tool change: 8 kg - Max. total tool weight in magazine: 160 kg - NC rotary table integrated into the fixed table - Number of T-slots: 14 / H 12 mm - Dovetail guide / one: 14 / H 7 mm - Distance between T-slots: 63 mm - Permissible load on the worktables: fixed table: 800 kg, rotary table: 500 kg - Includes the tool holders located in the tool changer Note: The machine can be transported on a truck up to 3000 mm wide! FCA D-72589 Westerheim - loaded onto a truck. Dodezxzk Eepfx Aaxowb

Year of construction: 2025, operating hours: 1,250 h, condition: reconditioned (used), functionality: fully functional, Mobile screen separator for biowaste, household waste, residual waste, compost, green waste, biomass, waste wood, wood chips. Current application: biowaste processing for wet fermentation. The machine provides a contaminant-free, homogeneous fraction for the fermenter, thus preventing the formation of sinking or floating layers. Inspection & demonstration: Inspection possible during live operation at our partner company in the Kelheim district. Processes can be discussed directly with the plant operator. Technical data: Model: Lepton 5100 | Year of construction: 2025 | approx. 1250 operating hours Location: D-84069 Schierling | Availability: short-term Screen decks: Deck 1 (52mm), Deck 2 (43mm) Dwjdsy Elwfspfx Aaxeb Equipment: Adjustable metering roller, volume measurement, preparation for air classifier, compressor, LED package, wireless remote control. Drive: Diesel-electric (Perkins 58kW, without Adblue) + option for external power supply (400V 63A). Transport dimensions: L: 11.97m / H: 3.98m / W: 2.53m (No special permit required). Screening material: Compost, green waste, biomass, wood, waste, EBS. Condition: Very good, fully operational, the machine will be completely refurbished in our workshop before sale.

Condition: like new (used), Bought new in 2022 and only used for a few months before the factory went Bankrupt. As new condition. 1 year guarantee. Dedpoyivtqefx Aaxswb

Condition: good (used), Technical specifications for the pallet rack upright: Racking system: Bito Type: PRO Included in delivery: 01x pallet rack upright, used Material finish: Sendzimir galvanized Frame profile: P5 Profile dimensions: P 100 x 76 x 2.25 mm Including horizontal and diagonal braces, base plates, and upright protectors The uprights are pre-assembled (bolted lattice construction) Height: 12,400 mm Depth: 1,100 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Djdpjx Hz Dwjfx Aaxowb This item is only available for collection. Any additional transport or shipping of this item will incur extra costs, which can be quoted separately depending on delivery location and scope.

Condition: ready for operation (used), functionality: fully functional, stroke length: 450 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 450 mm, TECHNICAL DETAILS Press drive: Hydraulic Max. workpiece length: 3,000 mm Max. workpiece width: 1,300 mm Max. workpiece height: 450 mm Total stroke: 450 mm Number of cylinders: 6 Cylinder diameter: 70 mm Heating type: Oil-heated Max. temperature: 120 °C Separate heating for top/bottom: Yes MACHINE DETAILS Number of work areas: 1 Number of levels: 1 Plate material: Steel Main motor power: 2.2 kW Connected power: 10.0 kW Voltage: 400 V Fuse rating: 32 A Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,650 x 2,400 mm Dwsdpfezxcmuox Aaxeb Weight: 3,500 kg Transport packages: 1 EQUIPMENT Heating boiler Note: The plates require repair. The plate on the lower bed is missing.

Condition: excellent (used), Year of construction: 2016, 1. For sale is a fully functional and very well-maintained gas burner from Weishaupt, model WM-G30/1-A. Burner type: WM-G30/1-A Output: 350 - 3100 kW Dodpfxshitrxs Aaxowb Design: ZM Year of manufacture: 2016 - Delivery is possible upon request. - All technical data can be seen in the pictures. Preferably sold to dealers, commercial enterprises, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical and data transmission errors.