Used Anchor Drill Rig for sale (7,321)

Condition: excellent (used), Year of construction: 2017, HOMAG CNC throughfeed drilling machine BHT500 Portal machining center for processing workpieces made of wood or wood-based materials. - Powercontrol System WoodWOP - 17" TFT display - Vertical drilling units with up to 38 drilling spindles - Horizontal drilling units with up to 21 drilling spindles, individually selectable - 2 grooving saw units in X axis - Workpiece dimensions: length 250-2500mm / width 100-1400mm (or 2x 600mm) / thickness 12-60mm - Five-sided machining possible - Barcode reading system - Year of manufacture: 2017 Cgsdpfx Afex Rt Atonen - Immediately available

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp Cgjdpfxeyhdvks Afnen • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 Cedpfx Aju Aa I Ssfnsgn constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Danumeric 440 overhauled and digitized 2024 Machine version - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 Cgedpfx Asu Dg D Aofnjn constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns Data interfaces USB

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Csdermkfnspfx Afnegn Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device Csdsvv Spkspfx Afnsgn • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: used, machine/vehicle number: 3700190, total length: 3,000 mm, total width: 1,900 mm, total height: 1,800 mm, overall weight: 1,500 kg, pressure: 6 bar, CMB Besana double-side drilling machine 70-2TC Cjdpfjyftu Dex Afnsgn

Condition: used, Year of construction: 1997, Technical details: bore capacity in steel (diameter): 35 mm arm length: - mm workpiece height max.: 660 mm threading: GG 25 M36 threading: ST 60 M30 drill capacity in cast iron: 42 mm tool taper: MK4 quill stroke: 165 mm Table dimensions: 1200 x 600 mm column diameter: 170 mm work height max.: 900 mm current type: Drehstrom total power requirement: 25 A frequency: 50 Hz connection voltage: 400 V connected load: 6,5 kVA Cgjdpfx Afsxu Dwgjnon dimension machine xH: 2,3 x 1,7 x 2,4 m weight of the machine ca.: 2,5 t Accessories and Equipment – DONAU DANUFLEX 135 Accessories: ·1 × Drill chuck ·2 × Angle plates ·1 × Machine vice ·1 × Clamping cube Features / Equipment: ·Side drilling table, height-adjustable ·Drilling possible at up to 3 stations (front, left, rear) ·Two-stage spindle gearbox, automatic switching via push button ·Continously variable spindle speed control in each gear stage: 20 – 3,100 rpm ·Continuously adjustable feed rate ·Thread cutting device integrated ·Adjustable depth limit stop *

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, throat depth: 1,280 mm, Radial Drilling Machine Manufacturer: WEBO Model: BR 40 Year of manufacture: 1975 Condition: Good / Ready for immediate use Control: Conventional Max. arm reach: 1250 mm Distance cube table to base plate (max.): 1100 mm Distance base plate to spindle nose: 450 - 1600 mm Spindle mount: Morse Taper 4 (MK 4) Drilling spindle diameter: 40 mm Quill diameter: 85 mm Drilling spindle stroke: 350 mm Speed range: 3 - 1800 rpm Feeds: 0.12 - 2.0 mm/rev Csdoyhdc Repfx Afnegn Drilling capacity in steel (diameter): 40 mm Clamping area of base plate: 1000 x 1350 mm Total base plate with T-slots: 2500 x 1000 mm Total power requirement: 7 kW Machine weight: approx. 4.5 t Space requirement: approx. 2.15 x 1.15 x 3.07 m Equipment: Drill table 500 x 500 mm with 3 T-slots Coolant system Thread cutting Column clamping via push buttons in the handwheel

Condition: good (used), Tool cabinet -with: spare parts for toolmaking, fixture construction -Various drill bushings: different sizes -various clamping elements -Dimensions: 670/300/H2000 mm -Weight: 200 kg Cedpfx Asb A Rcwjfnjgn

Condition: used, Year of construction: 2002, bore capacity in steel (diameter) 50 mm arm length / mm workpiece height max. / mm Drilling capacity in steel (diameter): 50 mm throat depth: 1600 mm Spindle stroke: 315 mm Tool holder: MK 5 Cedpsv H Ermofx Afnogn Total power requirement: 4.0 kW Machine weight approx.: 3.5 tonnes Space requirement approx.: 2.5x1.1x2.8 m

Condition: used, bore capacity in steel (diameter) // mm throat / mm bore stroke / mm ABARBOGA MASKINER GSMK6012 Drill press Cgjdpjxn Aqrofx Afnsn WITHOUT VISE

Year of construction: 2026, condition: used, machine/vehicle number: 55117, Inv. no.: 195000, horizontal spindle, adjustable cross T-slot table HENNIG, table size: approx. 100x90 cm, rotatable, speed range: 12.5–1,000 rpm, with digital position display HEIDENHAIN ND780, hydraulic unit SCHÄFER NG30, year of manufacture: 2023, serial no.: 10176 Cgodpfx Afsyciuhonsn

Condition: used, Speed / U/min. Arm length / mm Motor output / kW Csdpfxeithz Uo Afnogn

Condition: like new (used), Gillardon pillar drilling machine, type GB 30 V, speed 60 - 1800 rpm, automatic feed, very good condition, tool holder MK 3. Cgodpoxpxbcefx Afnjn

Condition: like new (used), Technical Specifications Csdpfx Afsvzgm Ionsgn Drilling capacity in steel (diameter): 32 mm Throat depth: 320 mm Drilling stroke: 170 mm Spindle mounting MK: 3 Speed range: Table size: 570 x 480 mm Total power requirement: 1.6 kW Weight: 650 kg Dimensions: 1200 x 800 x 2200 mm

Condition: used, tank capacity: 8,250 l, GENERAL Equipment: Crane eyes Design: Suspended Heating/Cooling: available Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 2.0 bar Agitator: Anchor agitator Location: External storage Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 8,250 liters Double jacket volume: 685.0 liters Product-contacting material: Enamel Condition: Used Last application: Pharmaceutical Cedoyciq Nepfx Afnsgn TANK Max. permissible operating temperature: 200 °C Base type: Lugs HEATING/COOLING JACKET Bottom temperature control: Double jacket EQUIPMENT Manhole/Dome: Top cover Outlet: available AGITATOR Agitator arrangement: Centered on the top cover

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Csdpfx Afeygcu Aonjgn Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: good (used), Year of construction: 1978, machine/vehicle number: G-271, High-speed radial drilling machine WEYRAUCH - SW 35 G Arm outreach: 1,200 mm Drill spindle taper: MT 4 Drilling capacity in ST 60: 32 mm Spindle speeds: 12 steps, 50 to 2,000 rpm Thread cutting capacity in ST 60: M27 Quill stroke: 160 mm Csdjyhbukepfx Afnsgn Table size: 1,200 x 500 mm Baseplate size: 1,200 x 450 mm Electrical rating: 380 V / 2 kW Required space (L x W x H): 1,800 x 1,200 x 2,350 mm Weight approx.: 2,000 kg

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Cgsdpfx Aoxlqxfefnjn Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: good (used), Year of construction: 1977, machine/vehicle number: 1314, Radial Drilling Machine ALZMETALL - AB 30 R Arm reach: 800 mm Spindle taper: MK 4 Drilling capacity in steel: 45 mm Thread cutting device - up to M30 Spindle stroke: 160 mm Spindle speeds: 8 steps, 56 to 1,250 rpm Thread cutting steps: 4 - 0.15 / 0.2 / 0.3 / 0.35 mm/rev Clamping cube with T-slots: 550 x 480 x H - 500 mm Machine vice on rotary table - jaw width: 200 mm Space requirements: 1,600 x 700 x H - 2,250 mm Csdpjyhbq Sofx Afnogn Weight: 1,370 kg

Condition: good (used), Year of construction: 1977, machine/vehicle number: 1314, Radial Drilling Machine ALZMETALL - AB 30 R Arm reach: 800 mm Spindle taper: MK 4 Drilling capacity in steel: 45 mm Thread cutting device - up to M30 Spindle stroke: 160 mm Spindle speeds: 8 steps, 56 to 1,250 rpm Thread cutting steps: 4 - 0.15 / 0.2 / 0.3 / 0.35 mm/rev Clamping cube with T-slots: 550 x 480 x H - 500 mm Machine vice on rotary table - jaw width: 200 mm Space requirements: 1,600 x 700 x H - 2,250 mm Weight: 1,370 kg Cgedpfxsyhbnke Afnsn

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: AB/226310, total length: 4,300 mm, total width: 1,880 mm, total height: 2,350 mm, empty load weight: 1,310 kg, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,300 x 1,880 x 2,350 mm Codpfx Afox Tpv Ienegn Unladen weight: 1,310 kg

Condition: good (used), Year of construction: 2016, Internal item no.: 26001 Taxed under the differential taxation scheme according to §25a German VAT Act. You will receive a proper invoice, but VAT is not separately shown. Cgodpfx Afsygvtxonjn You are welcome to inspect the machine under power in a heated warehouse area of over 500 m². Column Drilling Machine Geldmacher DP25 Year of manufacture: 2016 + Thread cutting function + Infinitely variable speed (150 - 3000 rpm) + Coolant pump + Emergency stop / safety cover with switch (UVV compliant) Dimensions (approx.): 90 x 65 x 185 cm Weight: approx. 350 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), functionality: fully functional, Year of construction: 2008, Peddinghaus BDL 1250/9D Meba 1270 DGP CNC Drilling / Sawing Line - Year 2008. 9 spindles. Etching of beam. Carbide Drilling Hard stamping unit. Measuring Head. In-Feed Cross Transfers. Out-Feed Cross Transfers. 1250mm Capacity. Cedpfox Ruuwox Afnegn