Used Airtower 26 for sale (6,247)

Condition: used, maximum load weight: 29,625 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2017, next inspection (TÜV): 03/2027, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,460 mm, loading space volume: 26 m³, total width: 2,550 mm, total height: 3,035 mm, Equipment: ABS, In accordance with our “General Terms and Conditions”, without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Schmitz, approx. 26 cbm steel tipper/dump body, semi-circular (Vehicle No. 370) First registration: 09.10.2017 Laodjy U Aztopfx Amrjc Type: SKI 24 7.2/ SGF-S3 Permissible gross vehicle weight (GGV): 36,000 kg Unladen weight: 6,375 kg Payload: 29,625 kg MOT (TÜV) valid until: 03/2027, inspection (SP) valid until: 09/2026 Overall length: 8,785 mm, interior: 7,480 mm Overall width: 2,550 mm, interior: 2,354 mm Overall height: 3,035 mm, interior: 1,460 mm Roll tarp, platform, access ladder on the driver's side Hinged tailgate with rubber seal 2 x 12-ton, 2-speed geared winch Shovel and broom holder on the driver's side 2 x chock Air suspension with lifting and lowering function 1st lift axle Schmitz coupling Tires: 1.) approx. 40/60%, 2.) approx. 90/40%, 3.) approx. 80/90% Half-shell fenders 2 x LED reversing lights Folding A-frame Fold-up underrun protection 2nd and 3rd axles with new air springs Price: € 16,500.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of € 10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typographical errors, and prior sale.

Condition: used, Year of construction: 2025, Used machine Year of manufacture: 2025 Condition: as new, delivered in 12/2025 Equipment and technical specifications: - Heavy-duty worktable made from strongly ribbed cast iron for maximum stability and durability - Robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation Laodpsy Sva Dofx Amrjc - Precision sliding table made from anodized aluminum – smooth-running guided via high-quality ball contact system - Carbide guideways – for lasting precision and minimal maintenance - Tilting cast iron saw assembly with double segment guidance – exact zero-point tilt for highest cutting accuracy - Heavy-duty parallel fence with round bar guide - Equipped with movable eccentric clamp - Integrated miter cutting device on the sliding table – for fast and precise miter cuts - Scoring unit with belt drive - Sliding table length: 2600 mm - Cutting length: 2600 mm - Sliding table width: 360 mm - Table length: 940 mm - Table width: 560 mm - Cutting width with parallel fence: 900 mm - Max. crosscut width to the left of saw blade: 3200 mm - Saw blade tilt: 90 – 46° - Max. cutting height at 90°: 100 mm - Max. cutting height at 45°: 71 mm - Saw blade diameter: 315 mm - Saw blade speed: 4000 rpm - Scoring saw blade diameter: 120 mm - Scoring saw blade speed: 9000 rpm - Motor: 6 kW - Weight: approx. 560 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan Lajdpfx Amoyq Nl Nerjc - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% - Stock No.: 1109

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Ljdpfsy Ur Hlox Amroac Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: used, machine/vehicle number: TWCS00402K1001729, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 06/2020, total length: 9,420 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/65 R22.5, color: other, Year of construction: 2020, Tyre size: 445/65 R22.5 Brakes: disc brakes Lajdpfx Ajx Rzttemrec Suspension: air suspension Axle 1: Max. axle load: 10000 kg; Tyre profile left: 50%; Tyre profile right: 50% Axle 2: Max. axle load: 10000 kg; Tyre profile left: 50%; Tyre profile right: 50% Empty weight: 7.550 kg Carrying capacity: 29.450 kg GVW: 37.000 kg

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, loading space length: 4,950 mm, loading space width: 2,110 mm, color: yellow, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Welcome to carmax24! Today, you have the opportunity to purchase one of our selected, inspected vehicles. Expertly inspected and high-quality vehicles guarantee high customer satisfaction, and have done so since 2008. This is our daily approach because you, as a customer, are our top priority at carmax24. Ljdpfxjzah Rps Amrsac Iveco Daily 35S18HA8, Euro VI, 176 hp, 3.0 Diesel, 8-speed automatic transmission - New Model Technical Data: * Type: 35S18A8H * Engine: Euro VI, 176 hp * Displacement: 3.0 l * Transmission: Automatic transmission * Wheelbase: 4100 mm * Color Code: Yellow * Permissible total weight: 3,500 kg * Vehicle type: Truck * Additional: Rubber floor mats Special equipment from the factory: * 00344 - Rear-view camera * 05925 - Additional, adjustable, and switchable speed limiter * 07629 - Without acoustic reversing warning signal * 00744 - Window in the rear wall of the cab * 06064 - Reinforced double parabolic springs in the rear (for S models) * 08628 - Storage compartment above the windshield STYLE PACKAGE 3.5 S * 79336 - Daily radiator grille with chrome strips * 01553 - Emblems in "Gun Metal" * 02443 - Leather steering wheel * 02308 - Aluminum rims Daily * 72625 - Full LED lighting (daytime running lights, low beam, high beam) COMFORT PLUS PACKAGE * 00259 - Sprung-mounted comfort driver's seat with lumbar support and armrest * 01611 - USB ports (A + C) for driver and passenger * 75082 - Passenger double seat bench with folding table and 3-point belts * 07196 - Air conditioning compressor 170 cm³ * 01605 - Infotainment system "NAVI MY IVECO" with 10-inch display * 14522 - Adaptive cruise control (ACC) with radar sensor * 06650 - Automatic climate control and heating system * 79297 - Comfort headrests made of memory foam with Daily logo Body Specifications - Platform * Dimensions: approx. 4900 mm x 2100 mm * Single cab Body Construction * Aluminum frame made of welded special profiles * Loading area made of non-slip, perforated aluminum plates * Openings reinforced with stainless steel inserts * Aluminum loading ramps (340 mm wide, 2500 mm long) * Ramps stored in drawers, can be moved across the entire width * Central locking system for the loading ramps * Movable winch frame * Simple bicycle protection cover * Fenders with mud flaps (2 pieces) * Trailer hitch + second hitch with socket * Toolboxes (500 mm - 2 pieces) * Painted sides, railings, and rear panel * Reinforced edges with aluminum angles * Additional lashing points (8 pieces) Electrical System * Rear lighting mounted on the vehicle frame * LED side marker lights (orange, 6 pieces) * LED contour lights (white/red, 2 pieces) * Trailer sockets (2 pieces, 13/7-pin) * Work spotlights H3 in the front (2 pieces) * Main switch Additional Options * Electric winch SUPER WINCH TS9500 (4.2 t) * Front railing (high) * Warning light bar Yellow LED * Additional work light LED Our special service for you: * Maintained according to service schedule at authorized dealers and master workshops * Winter tires available for an extra charge * Extended warranty up to 36 months available for an extra charge * We will gladly and fairly take your used vehicle in trade! * Financing possible from 6.99% with or without down payment up to 96 months, subject to credit approval * TÜV / DEKRA main and emissions test

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZAX26R07319P00181, empty load weight: 4,150 kg, maximum load weight: 21,850 kg, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, loading space length: 7,250 mm, loading space width: 2,450 mm, total length: 9,205 mm, total width: 2,550 mm, suspension: air, tire size: 265/70 R 19.5, tire condition: 90 %, color: red, trailer brake: trailer braked, Year of construction: 2001, ZORZI TRAILER WITH FIXED MULTILAYER PLATFORM AND FRONT AND REAR SIDE RAILS; USEFUL WIDTH 2450 mm; USEFUL HEIGHT OF REAR DOORS 2180 mm; FIXED DRAWBAR 1.75 m; EYELET DIAMETER 50 mm; SINGLE OWNER; ABS; VALID INSPECTION UNTIL 10/2026, READY FOR WORK. ZORZI CURTAIN TRAILER WITH MULTILAYER PLATFORM; FIXED DRAWBAR 1.75 m; EYELET DIAMETER 50 mm; SINGLE OWNER; ABS; TUV VALID. ALL VEHICLES FOR SALE CAN BE INSPECTED AND CHECKED, GIVING THE CUSTOMER THE CHOICE OF THE PREFERRED TYPE OF RECONDITIONING. OUR SALES TEAM IS AVAILABLE FROM MONDAY TO FRIDAY FROM 8:30 AM TO 6:00 PM AND ON SATURDAY FROM 8:30 AM TO 12:00 PM. TO REACH US BY CAR, TAKE THE A31 MOTORWAY AND EXIT AT THIENE; BY TRAIN, GET OFF AT THE THIENE TRAIN STATION. Lsdpjzcaqmofx Amrjac

Condition: used, axle configuration: 3 axles, first registration: 12/2002, color: grey, Year of construction: 2002, gearing type: other, LICENSE PLATE: AC22259 TITLE: ZORZI 26 R 070 19 A BALESTRATO HOOKLIFT TRAILER REF: 21R09 YEAR: 2002 AXLES: 3 WHEELBASE: 3800 mm MAXIMUM LENGTH: 9.205 m ORIGIN: Italian PAYLOAD: 21,650 kg - TRAILER GVW: 26,000 kg fully loaded BODY TYPE: Hooklift BODY MANUFACTURER: BTE ADR: No BODY MOUNTING LENGTH: FROM: 5.00 m + 0.20 m TO: 7.30 m + 0.20 m SUSPENSION: Leaf Spring BRAKES: Drum brakes TYRES: 265/70 R19.5 ACCESSORIES: - 4 external hydraulic locks - Locking device with tractor hydraulic hoses REFURBISHED: No INSPECTED: 12/10/2022 TYRE CONDITION: 60% Prices shown do not include VAT. Please contact the sales department for up-to-date price and condition comparisons. Laodpfsuznrcjx Amroc For more information: Loris: 3484773001 URL: #thespecialistsofhooklifts AURORA HOOKLIFTS operates in the sale and purchase of industrial and commercial vehicles, specializing mainly in waste management sector. Specialists in trucks, trailers, and hooklift equipment. With an available stock of over 50 trucks and more than 150 hooklift bins and containers, with or without cranes, ready for delivery. E&O.E Given the quantity of listings and details provided, Aurora invites customers to verify all information with the sales staff.

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges Ledpjxxalnofx Amrjac - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: used, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2025, next inspection (TÜV): 01/2026, Year of construction: 2024, Equipment: ABS, Total length without chute: 8801 mm Total length with chute: 8962 mm Internal length: 7410 mm Total width: 2550 mm Internal width: 2346 mm Internal height: 1515 mm Track gauge: 2040 mm Distance: Kingpin to 2nd axle: 4800 mm Rear overhang without chute: 1296 mm Rear overhang with chute: 1457 mm Ground height: 1464 mm Max. height with tipped body: 8272 mm Total weight: 36,000 kg Technical gross weight: 39,000 kg Axle load: 8,000 kg Fifth wheel load: 12,000 kg Load volume: 26 m3 Manufacturer designation for homologation: NW-3 nd Unladen weight: 6376 kg The weight is specified with an accuracy of ±3% nd The manufacturer reserves the right to change the vehicle's technical specifications. Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel plate area. Welded construction, weight-optimized from high-strength S700 steel. Air suspension. Side impact protection made of aluminum profiles according to ECE 73. 2 plastic wheel chocks. Wheelbase 1310. Distance: kingpin on 2nd axle: 4800 mm. Steel underrun protection. Foldable underrun protection at the rear. Axles and suspension. 1200 mm fifth wheel height, unloaded. Number of axles: 3. Rigid axles. SAF disc axles, 3x9000 kg, 22.5 INTRADISC CD. 1st lift axle. Support legs. SAF Hercules 2-speed transmission supports, full load. Fenders. Full PVC fenders - 6 pieces. Rubber mud flaps with Wielton LOGO behind the third axle Wheels 6x steel rims 22.5-11.75 ET-120 wheel nut caps Tires 6x tires 385-65-22.5, manufacturer's choice Other chassis equipment Aluminum ladder L=2, 840 mm Shovel and broom on the chassis, above the fender Toolbox - 44 L (mounted at the front of the chassis, left side) Water tank 30 L (mounted in the middle of the chassis, left side) Body Volume 26 m3 Front wall tilted 20 degrees Steel hinged hatch Internal height 1515 mm Floor 4.5 mm, side walls 4.5 mm Hardox Lower tension locks - 2 pcs. Other body equipment Ljdpfx Asutz Uysmroac Operating station on the chassis frame, access on the left in FR (Driver's side) Cover PVC roll-top tarpaulin 680 g/m² with quick-release fastener and aluminum winding tube (for vertical rear end with front and rear extension triangles, center tube welded into the tarpaulin) PVC roll-top tarpaulin Braking system/Pneumatics Steel air chamber Spring-loaded pressure gauge Automatic lowering when tipping Wabco 2S/2M braking system Chassis paint finish Chassis paint finish RAL 7021 (black-gray) Body paint finish All steel parts are blasted twice before painting. Body paint finish RAL 7001 (silver-gray) Tarpaint finish Tarpaint finish RAL 9006 (white aluminum) Hydraulics HYVA hydraulic cylinder, eye-mounted top Hydraulic connection kit 1 Electrics Full LED lighting LED reversing light - 1 pc. 2x7-pin 1x15-pin with EBS connection, without connecting cables to the tractor unit Full LED lighting Aspöck - ECOLED II with flashing side marker lights Additional systems Control cable for lift axle from the driver's cab Pre-assembled brake This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Marking Reflective warning signs Partial contour marking with Wielton logo Partial contour marking on the side, white Partial contour marking on the rear, red Wielton warning sticker Warranty 24 months for the complete product fr

Condition: excellent (used), Year of construction: 2004, Maier ML 26 E CNC lathe TECHNICAL DATA Number of axes: 11 Spindle bore: 32 mm Path speed: 32 m/min Control: Maier Pro GE-Fanuc Guide bush: 451.001 Main spindle Clearance: 26 mm C-axis: Yes Mechanical indexing 5°: Yes Headstock stroke: 220 m Main spindle, speed: 0 - 6000 rpm Power: 3.7 kW / 5.5 kW (7.5 kW) Collet chuck: 161E Counter spindle Clearance: 26 mm C-axis: Yes Mechanical indexing 5°: Yes Max. travel (Z): 220 mm Counter spindle, speed: 0 - 6000 rpm Main spindle, power: 1.1 kW Collet chuck: 161E Cross machining Basic holder for turning rings 5 pcs. 16 x 16: Yes Number of driven tools: 4 Power of the driven tools: 0.5 kW Back machining Drive power: 0.5 kW Number of tools: 4 of which driven tools: 4 Collets: ER16 Tool turret Lodpfxsu S Rivs Amrsac Number of tools: 16 Number of driven tools: 8 Drive power: 0.5 kW C-axis: 360 ° Z-axis: 175 mm X-axis: 200 mm Collets: ER16 SCOPE OF OFFER U.A: (list not exhaustive): Maier ML 26 E CNC lathe Oil mist separator transformer Chip conveyor High pressure pump / belt filter system Fire extinguishing system LNS bar feeder Complete operating documentation Exact scope of offer according to photo gallery No responsibility is taken for the accuracy, completeness and timeliness of the information

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale: a brining injector from Günther Type: PI 26 M including filter system GRF 200 K Laedpfsy Uwr Tsx Amroc Year of manufacture: 2015 Capacity: approx. 500 – 800 kg/h Stroke rate [strokes/min]: 10-60 strokes Passage diameter: 210 mm Belt length: 1100 mm Equipped with 26 needles, needle thickness (standard) approx. 4.0 mm The injection volume can be continuously adjusted from 2 to 25% The machine is in very good condition and ready for immediate use.

Condition: used, mileage: 1,168,700 km, power: 353 kW (479.95 HP), first registration: 11/2013, fuel type: diesel, overall weight: 26,000 kg, color: yellow, gearing type: mechanical, Total allowable weight: 26000kg Lsdpfx Amjv Nzxbsrjac

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 123/78/H67 mm Lajdpfx Aey Ai Amsmroc -Total weight: 3.2 kg

Condition: used, - Documentation available: No - CE certificate present: No Financial information Lajdpjwh Nacjfx Amrjc VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Price: On request Granulator Dreher S26/26 VS Machine No. K 8329 Built in 1982 Engine 5.5kW Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Interchangeable strainer Laedpfx Aowh Naijmrsc Sieve holes 6mm - Documentation available: No - CE certificate present: No - Main motor power [kW]: 5.5 - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Loewe, adjustable machine reamer -Diameter: Ø 26 mm Ljdpfxsyz Np De Amreac -Recording: MK1 -Dimensions: Ø 26 x 290 mm -Weight: 0.6 kg

Condition: new, empty load weight: 560 kg, maximum load weight: 2,040 kg, overall weight: 2,600 kg, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, tire size: 165r13, Product information "UNSINN WEB-HK2715-26-13 2600kg 276x150x30cm rear tipper with PUMPless" Rear tipper from the manufacturer Unsinn. Made in Germany! The WEB-HK2715-26-13 high-loader rear tipper can be easily loaded from the side and rear with a forklift or by hand thanks to the foldable and removable aluminum side walls. The load is tipped back out using manual hydraulics. Lajdpfxoqv Ec Ho Amrec A welded subframe makes the tipping trailer very stable. The car trailer is equipped with foldable and removable side walls, a solid steel floor, PUMPless hydraulics for cordless screwdrivers, an automatic support wheel, lashing eyes, a welded, hot-dip galvanized frame, and a very stable V-drawbar. Trailer accessories such as a leaf grid attachment, side wall attachment, tarpaulin and frame, tarpaulin, net and supports are also available for an additional charge.

Condition: new, empty load weight: 630 kg, maximum load weight: 1,970 kg, overall weight: 2,600 kg, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 300 mm, tire size: 165r13, Product information "UNSINN WEB-DK3017-26-13-E 2600kg 306x175x85cm Grated sides, three-way tipper" Three-way tipper with a corrugated grating superstructure from trailer manufacturer Unsinn, model WEB-DK3017-26-13-E. Made in Germany! This flatbed trailer, designed as a three-way tipper, is equipped with electric hydraulics for tipping. The folding and removable side walls allow for easy loading of the trailer from the side and rear using a forklift, wheel loader, or by hand. A welded, hot-dip galvanized steel frame makes the tipper trailer very stable. The tipper with grated sides is equipped with folding and removable side walls, a solid steel floor, electro-hydraulic system, automatic support wheel, lashing eyes, welded hot-dip galvanized frame, rail system, and a very stable V-drawbar. For an additional charge, tipper accessories such as side wall extensions, tarpaulin and frame, flat tarpaulin, net, box, loading ramps, and supports are available. ----- Laedpog Un Dzsfx Amrec With us, you can also get: · Financing · Leasing (for commercial customers only) · Consultation · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repair · TÜV inspection for car trailers Car trailer center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: new, mileage: 25 km, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 3,550 kg, maximum load weight: 3,950 kg, overall weight: 7,490 kg, tire size: 205/75/R17,5, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, loading space length: 6,100 mm, loading space width: 2,480 mm, Equipment: ABS, additional headlights, air conditioning, central locking, cruise control, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, - Fuso 9C18 new model 2026 with GSR and aluminum flatbed - Available immediately - GSR incl. rear-view camera, turn assist, tire pressure and temperature monitoring, etc. from 07/2024 - Cruise control - Comfort driver's seat - Double passenger bench - Automatic climate control - Wheelbase: 4.75m - Permissible gross weight: 8,550 kg, downgraded to 7,490 kg gross weight, payload approx. 4,000 kg (permissible gross weight of 8,550 kg possible without modifications, then payload approx. 5,000 kg!) - Flatbed dimensions: 6.10m x 2.48m x 0.50m - 2x storage boxes - Trailer coupling 3,500 kg - 3x work lights - Subject to errors and prior sale! - More information and XXL images available on our homepage. - For inquiries in English please call ... Air conditioning, climate control, automatic transmission, VAT deductible, ASR, ABS, multifunction steering wheel, radio, onboard computer, cruise control, heated mirrors, electric front windows, electronic immobilizer, remote central locking, trailer hitch, fog lamps, power steering, rev counter, differential lock, outside temperature indicator, tinted windows, electrically adjustable mirrors, tachograph, spare wheel, driver's cab: local specification, electric windows, work lights, auxiliary lights, heat-insulating glazing, new vehicle, emission class: Euro 6, diesel, rear-wheel drive, very good condition, consumption: 0.0/0.0/0.0 l/100 km (combined/city/outside), particulate filter, available for rental, particulate badge: 4 - green, tire pressure loss warning Lsdpfx Amsyxrnqsrsac

Condition: used, Technical specifications: Max. planing width: 500 mm Max. planing height: 250 mm Cutterhead diameter: 110 mm Number of knives: 3 2 feed speeds Manual lifting Power supply: 380 V Motor power: 4 kW Overall dimensions: Length: 1000 mm Width: 1100 mm Height: 1400 mm Lasdjzd Evvspfx Amrjc

Condition: used, Technical specifications: Spindle diameter: 30 mm Spindle height: 170 mm Speeds: 3000/4500/6000/7000/10000 rpm Manual spindle height adjustment Spindle lock Work table dimensions: 720x2620 mm Adjustable support arms Motor power: 5 kW Power supply: 400 V Overall dimensions: Length: 1050 mm Width: 2620 mm Height: 1850 mm Lsdpfx Amezd Eu Sereac

Condition: used, Technical specifications: Spindle diameter: 30 mm Spindle height: 130 mm Rotations: 3000/6000/8000/10000 rpm Manual spindle height adjustment Spindle lock Work table dimensions: 1800x650 mm Adjustable cullet arms Motor power: 4 kW Power supply: 400 V Overall dimensions: Length: 650 mm Lajdpfszd Eufox Amrsc Width: 1080 mm Height: 1300 mm

Condition: used, Technical specifications: Spindle diameter: 35 mm Spindle height: 160 mm Speeds: 3000/4500/6000/8000/10000 rpm Manual spindle height adjustment Manual spindle angle adjustment in the range of -5/+40 degrees Left/right rotation Spindle lock Dust extraction port diameter: 140/100 mm Work table dimensions: 850/1190 x 2500 mm Adjustable support arms Motor power: 5.5 kW Laedpezd Etuofx Amrsc Power supply: 380 V Overall dimensions: Length: 2600 mm Width: 1200/1540 mm Height: 1100 mm

Condition: used, Technical specifications: Lodpfxjzd Erwe Amrjac Briquette diameter: 55 mm Briquette length: 50 mm Tank diameter: 1000 mm Tank height: 910 mm Tank capacity: 2.86 Output: 910 L Feed capacity: 400 L Motor power: 4 kW Safety switch Overall dimensions: Length: 1700 mm Width: 1100 mm Height: 1490 mm