Used Airtower 11 for sale (12,334)

Condition: good (used), Manufacturer: KAESRER Year of manufacture: 1999 Type: AIRTOWER 11 Item number: 1.8833.10020 Serial number: 1010 Operating hours: 5,766 h Pressure: 7.5 bar Delivery volume: 975 l/min Motor speed: 3,000 rpm Connection: 7.5 kW Dryer: TU 11 Refrigerant: R 134a Pressure: 16 bar Condition: Good Weight: 270 kg Colhccowhwx Hoqropu Dimensions: 680 x 780 x 1,300 mm

Condition: good (used), Year of construction: 1998, Screw Compressor with Refrigeration Dryer KAESER Air Tower 11 Operating hours approx. 68,980 h Maximum operating pressure 9.5 bar Free air delivery at 7.5 bar: 1,145 l/min Motor power 7.5 kW Integrated KAESER refrigeration dryer Celhccqjxtbpksropu automatic condensate separator incl. oil-water separator Kaeser Aquamat CF3 incl. oil-water separator Kaeser Aquamat CF6 Dimensions approx. L x W x H = 625 x 670 x 1285 mm Weight approx. 270 kg Note on used machines: • Technical data subject to errors and prior sale. • Prices stated are ex works – free loading! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if confirmed in writing. (We only respond to inquiries that include your address and telephone number!)

Condition: good (used), Marel SC90 Salmon Slicer Salmon Slicer Model: SC90 Silk Cut 11 D Cut slicer Single Lane With adjustable slice thickness and angle Up to 90 slices per minute Slice angle: 8-20 degree Dual frequency 50/60Hz Cpslov Dmz Dehccqrou

Condition: excellent (used), Gear motor Flender MBH 125CC-B 27.7/1 Helical bevel geared motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Celhjk E Htcoccqropu Suitable frequency inverters Walther Flender ZZ0103069.34003 Sinus Penta available Altogether 15 geared motors and 12 pieces frequency inverters available !!! Very good condition, directly from production!!!

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Cpjlhccoxbd U Ejqrsu

Condition: used, Year of construction: 2016, functionality: fully functional, 2000 kVA oil-hermetic transformer, SGB, year 2016, 11kV ± 2x2.5%/400V, HV plug-in bushings, full hermetic protection, rollers, test report Cpelhcjxvqp Secqreu

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. Cjlhccovvcqxoqrepu for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg

Condition: excellent (used), Year of construction: 2001, TUBULAR JUICE UHT STERILIZER MADE BY KF ENGINEERING, GERMANY CAPACITY 11 TONS PER HOUR Colhcsv Tl D Njcqropu FOR ALL JUICES, INCLUDING TOMATO MAX TEMP. 124 DEGR. C. PLC SIEMENS-7

Condition: used, Year of construction: 1989, functionality: unexamined, 23 pcs DIALOG11 cards Types and quantity for each type: NGE01 - 2 pcs NPE01 - 4 pcs NPC01 - 1 pcs NPA01 - 4 pcs NZP02 - 4 pcs Colhccqjwyudqoropu NRP02 - 1 pcs NSP02 - 1 pcs NSI02 - 2 pcs NPP04 - 2 pcs NSV02 - 2 pcs

Condition: new, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-60 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrating grizzly feeder, 1000 x 600 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 100-250 tph. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. Colhccjwakrqeqropu TECHNICAL SPECIFICATIONS: -Model: FTJ 11-60 -Production Capacity: 100 – 250 tons per hour -Maximum Feeding: 550 mm -Crusher Type: Jaw Crusher -SIZE: 1000x600 mm -Generator: 275 kva -CSS Setting: 40 – 150 mm -Weight: 40 tons – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Production line consisting of the following components: Motorized comb with multiple positions Vertical machining center Bremen Vektor Motorized panel handling system Vertical machining center Bremen Vektor Motorized transfer unit Motorized return conveyor TECHNICAL DETAILS Motorized comb length: 2,000 mm Vertical machining center Bremen Vektor Drilling head: 1 with 7 horizontal spindles in X, 16 vertical spindles in Y Pantograph: With turret tool changer for 8 positions Horizontal drilling unit: 1 for stop drilling Motorized panel handling Return: With 180° rotation and THK guide rails Cslhcjydlapocqropu Length: 2,500 mm Vertical machining center Bremen Vektor Automatic infeed: By motorized chain and vertical pressure rollers Working height adjustment: Automatic via CNC Storage containers: 5 for hinges/buffers/tie rods Motorized transfer unit Output: From vertical to horizontal towards operator Length: 2,000 mm Motorized conveyor Return: To operator EQUIPMENT Computer, keyboard and mouse 15" monitor CD-ROM Automatic infeed by motorized chain and vertical pressure rollers Automatic working height adjustment via CNC

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 7,800 mm, Bavelloni Straight Line Edger Model: VE500 11 11 Spindle Celhccoydc I Dsqropu Excellent condition Delivery and Installation available

Condition: good (used), Year of construction: 1990, Hydraulic Surface Grinding Machine with Automatic Vertical Feed Max. grinding length: 670 mm Max. grinding width: 280 mm Max. grinding height: 400 mm Table speed, longitudinal: 2 – 35 m/min Table speed, cross: 0.3 – 40 mm/stroke Rapid traverse: yes Grinding wheel dimensions: 300 / 76 x 40 mm Drive power: 4 kW Machine dimensions (L x W x H): 2000 x 1850 x 2000 mm Machine weight: 2300 kg Hydraulic & electrical unit dimensions (L x W x H): 1200 x 800 x 2000 mm Hydraulic & electrical unit weight: 650 kg Accessories / Special features: • Permanent magnetic chuck 630 x 200 mm • Automatic vertical feed with digital display • Manual dresser • Coolant system • Separate hydraulic unit • Grinding wheel • Machine leveling elements The following works have been carried out by us: Cpjlhjf Um Rasccqrou o Hydraulic cylinder for table stroke re-sealed o New filters installed in hydraulic unit o Cross feed handwheel adjustment rebuilt with new bearings Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1993, electric motor, three-phase motor -Manufacturer: Fimec, electric motor -Type: H132SD2UE -Power: 11 kW -Speed: 2800 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection rating: IP54 -Number: 4x motors available -Price: per piece -Dimensions: 480/255/H340 mm Celhccoyhnpusqrjpu -Weight: 53 kg

Condition: used, Model North - South, clock wise rotation Cpslhcsycqrhocqrou Belt width 600 mm Tiers 32 pcs. Product gap max. ± 89 mm Belt length ± 425 m Infeed height 800 mm Outfeed height 5.800 mm Cooling Freon Power 3 x 400V, 50Hz 45 kW total connected power Required cooling capacity: 150 kW Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm motor compressors and panels not included

Condition: excellent (used), mileage: 184,321 km, power: 180 kW (244.73 HP), first registration: 11/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, fuel tank capacity: 200 l, driver cabin: sleeper cab, gearing type: automatic, number of gears: 6, emission class: euro6, total length: 9,530 mm, total width: 2,550 mm, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2021, Equipment: AdBlue, tail-lift, Technical Information Number of cylinders: 4 Engine displacement: 5,132 cc Maximum front axle load: 4,480 kg Maximum rear axle load: 8,480 kg Weights Unladen weight: 6,270 kg Payload: 5,730 kg Gross vehicle weight (GVW): 12,000 kg Functionality Tail lift: MBB, rear flap, 1,500 kg Condition Technical condition: very good Visual condition: very good Further Information Contact Martin Vos Vos, Martin Martin Vos or Martin Vos for more information. = Company Information = Celhccqoyhlftjrepu hello

Condition: excellent (used), mileage: 681,950 km, power: 300 kW (407.89 HP), first registration: 11/2017, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,160 mm, total width: 2,550 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, = Additional Options and Accessories = - (Roof) spoiler - Aluminium fuel tank - Climate control - Sleeping berth - Radio/CD player - Electrically adjustable side mirrors - Transmission devices - Sun visor - Digital tachograph = Further Information = General information Cab: single Registration number: 40-BKD-6 Technical information Number of cylinders: 6 Engine displacement: 10,837 cc Unladen weight: 7,298 kg Cpolhceyhn U Rscqrou Axle configuration Brakes: disc brakes Front axle: Tire size: 385/65 R22.5; Max. axle load: 7,500 kg; Left tire tread: 30%; Right tire tread: 30%; Suspension: leaf spring Rear axle: Tire size: 315/70 R22.5; Max. axle load: 12,000 kg; Left tire tread: 30%; Right tire tread: 30%; Suspension: air suspension Maintenance APK (general technical inspection): valid until 11.2026 Condition Technical condition: very good Visual condition: very good Damages: none

Condition: good (used), mileage: 303,212 km, power: 158 kW (214.82 HP), first registration: 11/2021, fuel type: diesel, tire size: 245/70R17,5, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, fuel tank capacity: 20 l, driver cabin: sleeper cab, gearing type: automatic, number of gears: 6, emission class: euro6, total length: 9,500 mm, total width: 2,550 mm, loading space length: 7,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, Year of construction: 2021, Equipment: AdBlue, tail-lift, Technical information Number of cylinders: 4 Engine displacement: 5,132 cc Axle configuration Tyre size: 245/70R17.5 Front axle: Max. axle load: 4,480 kg; Axle brand: BRIDGESTONE; Tyre tread left: 70%; Tyre tread right: 70% Rear axle: Max. axle load: 8,480 kg; Axle brand: HANKOOK; Tyre tread left: 70%; Tyre tread right: 70% Weights Unladen weight: 6,513 kg Payload: 5,487 kg Gross vehicle weight: 12,000 kg Functional Tail lift: Dhollandia, rear tailgate, 1,500 kg Loading height: 90 cm Maintenance, history and condition APK (Technical Inspection): valid until 11/2026 Technical condition: good Visual condition: very good Cpslhceyhdkzocqreu Further information For more information, please contact Martin Vos Vos, Martin Martin Vos or Martin Vos. = Company information = hello

Condition: ready for operation (used), Year of construction: 2009, Edgebander manufactured in 2009. This HOMAG PROFI KAR310/11/A20/S2 features a work piece return system BARBARIC. Consider the opportunity to buy this HOMAG PROFI KAR310/11/A20/S2 edgebander. Contact us for further details. • Condition: Used Cpolhccqeyhqi Dsrou Additional equipment • BARBARIC workpiece return system

Condition: used, functionality: fully functional, Year of construction: 1996, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: simplex, construction height: 3,010 mm, fork carriage width: 1,500 mm, fork length: 1,100 mm, empty load weight: 5,958 kg, total length: 3,280 mm, drive type: Elektro, construction width: 2,060 mm, Four-way sideloader Load center of gravity: 550 Fork width: 150 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Cslhccqowdkngjrspu Battery voltage: 80V Battery Ah: 620Ah Battery year of manufacture: 2017 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this EVS40/12-11/45 ST LK8.5. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We'd be happy to display your vehicle for consignment sale. Fork positioner, Platform height: 380 mm

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm turning height 600 mm z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V frequency 50 Hz control Siemens 840 D pl Cslhev Rrq Djccqrspu total power requirement 140 A weight of the machine ca. 18 t dimensions of the machine ca. 6,5 x 3,8 x 4,20 m

Condition: used, Year of construction: 1989, x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC-control DIALOG 11 spindle taper ISO 40 spindle turning speed range 31 - 5.000 U/min table-size 620 x 390 mm table load 250 kg power capacity 5,5 kW feeds -stepless- 2 - 6.000 mm/min quill stroke 80 mm Celhccsx Ndbqoqropu voltage 380 V total power requirement 11,0 kVA weight of the machine ca. 1,65 t dimensions of the machine ca. 1,85 x 1,90 x 1,80 m electric cabinet 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment

Condition: like new (used), Year of construction: 2008, load capacity: 1,100 kg, lifting height: 5,860 mm, construction height: 3,400 mm, operating hours: 2,077 h, fuel type: electric, mast type: duplex, Manufacturer & model: LINDE V 11 (equivalent to OM xop 2 ac) Mast: 2W5860 ID: 21052.5348 d Mast: 2W Lowered height: 3,400 mm Lifting height: 5,860 mm Load capacity: 1,100 kg Platform height: 5,360 mm Order picking height: 6,960 mm Cabin width: 1,200 mm Year: 2008 Operating hours: 2,077 h Battery: 48 V / 465 Ah - year 08/2018 Cjlhcox Nwvuscqrjpu

Condition: like new (used), Year of construction: 2008, load capacity: 1,100 kg, lifting height: 5,860 mm, construction height: 3,400 mm, operating hours: 2,078 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V 11 (identical to OM xop 2 ac) Mast: 2W5860 ID: 21052.5343 d Mast type: 2W Lowered height: 3400 mm Lifting height: 5860 mm Load capacity: 1100 kg Platform height: 5360 mm Order picking height: 6960 mm Cpolhccqsx Nwvnsreu Cabin width: 1200 mm Year of manufacture: 2008 Operating hours: 2078 h Battery: 48 V / 465 Ah – year 08/2018

Condition: new, empty load weight: 2,830 kg, maximum load weight: 9,070 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,000 mm, loading space width: 2,000 mm, suspension: steel, tire size: 235 / 75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height loaded: 590 mm, reinforced steel checker plate floor, 2 x ramps (2,550 mm long x 900 mm wide), 8 lashing eyes (2 t) on the outer frame, 4 lashing boxes (5 t) in the corners, geared support winch with load and fast gear, front, 2 times folding supports, rear, , chassis and body hot-dip galvanized, also available with hydraulic ramps! , Surcharge for support frame for milling conveyor 600 ¤, , -- Misprints, errors and changes excepted, Sample pictures --, More data under: !, More Details: ! Cpjlhccsyhry Djqrju