Used Pedestal Drill for sale (4,993)

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 449 year of construction 1995 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm spindle distance max. 685 Hjdpjgd Ipkefx Aacsfn spindle distance min. 185 table size 490 x 400 mm spindle speed 2000 rpm autom. feed 224 mm/min. rapid traverse 4,5 m/min. motor power feed 0,18 kW motor power rapid traverse 0,75 kW motor power drilling spindle 1,5 kW Mains connection 400 Volt, 50 Hz - Prduction drilling machine with spindle speed and feed rate - actual spindle speed 2000 rpm. - actual feed speed 224 mm/min. - 2 operating modes manual and automatic - electric drill head height adjustment - central lubrication - control cabinet at the rear side of the machine - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 900 kg good condition

Condition: ready for operation (used), machine/vehicle number: 13110506, Item number MA1165 Manufacturer Flott Type SB 10 Year of manufacture older Machine-No. 13110506 length [mm] 600 width [mm] 300 height [mm] 1500 Weight [kg] 70 Connected load 380V Hedpfx Aslz I Twsacjfn Gear [rpm] 400/4800 Mounting MK 2

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 452 year of construction 1996 drilling capacity in steel ST 60 25 mm Hedpfx Aajikrtqjcsfn drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm distance spindle nose to table 185 - 685 mm table size 490 x 400 mm Spindle speed 50 - 500 rpm. Stepless Drill slide feed rate 20 - 224 mm/min. Stepless Drill slide rapid traverse 4.5 m/min. Motor power feed 0.18 kW Motor power rapid traverse 0.75 kW Motor power drilling spindle 1.1 kW (speed 1000 rpm) Mains connection 400 volt, 50 Hz - Spindle speed infinitely variable via frequency converter - Drill slide feed infinitely variable via frequency converter - 2 operating modes set-up and automatic mode - central lubrication - control cabinet at the back of the machine - swivelling control panel - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 1000 kg. good condition

Condition: reconditioned (used), Year of construction: 2002, drill gomad WU 3G 2002 YEAR LIGNUM WU drills Drill WU 3G 3 TOP UNITS Flexible task drills with adjustable spacing of top, side, bottom and swivel drilling units equipped with multi-spindle drilling heads. Designed for drilling all kinds of holes. The modular structure provides many configuration options (working length, number of units, pneumatic clamps, etc.). They enable single- and multi-stage drilling and programming the operation of units depending on the needs. Feeding and receiving of the processed material is done manually. Other drilling functions are performed automatically (material pressure, simultaneous 3-sided drilling, pressure release). Spindle spacing scale according to the order 16 - 44 mm Distance between JC head units 250 - 2500mm Width of JG, JB, JC, JS units 160mm Unit feed cylinder stroke Hfodpfx Aaei Hqhfjcon JG - 100mm, JB 100 (120mm) Maximum material width 200mm Maximum material thickness 50mm Maximum drilling diameter 35mm Spindle speed 3000rpm JB units spindle center height above table 6 - 35mm (55mm) Drilling unit engine power 1.1 kW Duration of one-stage and two-stage cycle 4 - 6 sec and 6 - 10 sec Air pressure required 0.4 - 0.6 MPa Compressed air demand 2 m3/h per drilling unit Type of feed drive pneumatic with stepless speed regulation Supply voltage 400V, 50Hz Overall dimensions (L x W x H) 2200 - 4000 x 1500 x 2000mm Weight 2500 - 3000 kg Contact the advertiser Przemyslaw Kretowicz is online lignum 602 Show number

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. INTEGRATED CHIP CONVEYOR KBS 1051 SAW Hedpfx Aajxmvm Rscefn HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD OUTFEED 19.750mm OUTFEED CROSS TRANSFERS T13

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec Hsdotnh Alopfx Aacsfn MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: ready for operation (used), Voortman VB1250 lintzaag kap: 1250 x 500 mm versteksnede +/- 60°: 1000 x 500 mm versteksnede +/- 45°: 850 x 500 mm versteksnede -30°: 500 x 500 mm zaagsnelheid: 40 120 m/min vermogen: 7,5 kW Afmetingen lintzaag: 11.000 x 54 x 1,6 mm Voortman V630 drievoudige boorunit 2 horizontale boorunits 1 verticale booreenheid elke unit heeft een automatische gereedschapswisselaar met 5 posities spindel: SK40 (koeling via spindel) boordiameter: 8/40 mm boorsnelheid: 0 2000 tpm draadtappen: M8/M24 profielhoogtemeting inbegrepen middelpuntmarkering inbegrepen nummermarkeringseenheid inbegrepen 18 meter invoerrollenbanen 6 dwarstransportbanden van 4 meter lengte maximale breedte: 1050 mm cap: 400 kg/m max positioneringsgewicht: 9 ton Roltransportmeetsysteem = onbeperkte meetlengte Vacon 110 CNC-besturing Hydraulisch aggregaat 4kW - 160 bar Hjdpfx Aaswlkwwjcefn

Condition: good (used), Reamer, twist drill, drill Hodjv H D N Ropfx Aacefn -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Condition: good (used), Year of construction: 2002, functionality: fully functional, throat depth: 300 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 31 rpm, drilling capacity: 50 mm, stroke length: 250 mm, spindle mount: MK 5, drilling depth: 250 mm, table width: 500 mm, table length: 500 mm, rotational speed (min.): 31 rpm, rotational speed (max.): 1,400 rpm, overall weight: 1,200 kg, thread cutting capacity: M 36, Drilling capacity: Ø 50 mm Threadcutting capacity: M3 - M33 Spindle nose: MK-5 Spindle speeds: 31,5 - 1.400 rpm Spindle feeds: 0,10 - 0,14 - 0,20 mm/rev. 0,28 - 0,40 - 0,56 mm/rev. 0,80 - 1,12 - 1,60 mm/rev. Spindle stroke: 250 mm Table size: 500 x 500 mm Throat: 300 mm Motor power: 4 kW Hfsdpfsxk Uw Nsx Aacjn Machine LxWxH: 87 x 110 x 270 cm Machine weight: 1.200 kg

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21271 Specifications: Extended feed bar, for 14 foot first rod, effective drilling length of 4.2 mp 1 rod. Hose reel construction for better hose handling Upgrading hydraulics for better capacity and energy efficiency Hfodoxatp Ajpfx Aacsn Rod handling with 1 rod, drill length up to 7.5 meters New radio control New control system In-cab display for pressure adjustment and monitoring Directional instrument and meter counter HC25 hammer Rod shifter Ready for delivery   Description: We have a Montabert micro drill rn significantly upgraded w/ hc25 hammer and rod changer for sale. The tower has been significantly upgraded to function as it should. The feed beam has been extended to accommodate a 14 foot 1-rod. Which effectively makes the drilling length 4.2 mp 1-rod. Rod changer for 1 rod (12 feet) increases drilling length to 7.5 m. Compressor hydraulic valve can be included for an additional price. The tower is ready for delivery. Own weight: 1 Model: micro borretårn

Condition: used, operating hours: 20 h, Fuel type: Diesel Hodpouu Df Djfx Aacjfn

Condition: new, FACTORY-NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis travel: 4,000 mm Z-axis travel: 1,500 mm Y-axis (cross-ram): 1,300 mm V-axis (cross column): 1,000 mm Rotary table (C-axis): 2,000 x 2,000 mm Max. load capacity up to 15,000 kg Automatic universal swiveling head 1° x 1° (optionally with fixed ram Ø 210mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW Hsdpfxoq I Nkbo Aacofn ICS - internal coolant supply - 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Tool changer: 60-position chain magazine (vertical / horizontal change) Double hinged belt chip conveyor (longitudinal) Perimetric guarding (open at top) Only inquiries from Germany will be processed.

Condition: ready for operation (used), functionality: fully functional, No reserve price - guaranteed sale at the highest bid! Hodpfx Aaexnzvajcefn

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm Hfodpexm Rzisfx Aacsn -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Condition: good (used), Year of construction: 2001, functionality: fully functional, throat depth: 360 mm, spindle speed (max.): 1,270 rpm, spindle speed (min.): 68 rpm, total height: 2,350 mm, drilling capacity: 40 mm, total width: 600 mm, total length: 900 mm, stroke length: 200 mm, spindle mount: MK 4, drilling depth: 200 mm, table width: 500 mm, table length: 500 mm, rotational speed (min.): 68 rpm, rotational speed (max.): 1,270 rpm, overall weight: 650 kg, Drilling capacity: Ø 40 mm Hjdexizb Sspfx Aacefn Spindle nose: MK-4 Spindle speeds: 68 - 1.270 rpm Spindle feeds: 0,10 - 0,20 - 0,30 - 0,40 mm/rev. Spindle stroke: 200 mm Table size: 550 x 550 mm Throat: 360 mm Country of origin: Spain Motor power: 2,2 kW Machine LxWxH: 900 x 600 x 2.350 cm Machine weight: 650 kg

Condition: used, Year of construction: 1989, Please contact ATS Norway for more information Please provide reference number upon request: 21250 Specifications: 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Own weight: Engine hours: 5520 Model: 712HC-01 Hjdsw Ucm Uopfx Aacofn

Condition: good (used), Floor drilling machine MK3 from ERD* - MK3. Drilling machine, floor drilling machine, pillar drilling machine -Delivery: in as-is condition as inspected -Motor: HEW 0.8 kW -Table size: Ø 355 mm -Spindle holder: MK3 -Travel distance: 500 mm -Outreach: 300 mm -Pillars: Ø 110 mm -Spindle stroke: 150 mm -Transmission via: V-belt -Dimensions: 850/500/H1850 mm -Weight: 294 kg Condition: used Hfedpfxotvfhvs Aacon

Condition: new, BRAND NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Z-axis: 2,000 mm Y-axis (cross-ram): 1,500 mm V-axis (cross-column): 1,000 mm Rotary table (C-axis): 2,195 x 2,195 mm Max. load capacity up to 20,000 kg Automatic universal swivel head 1° x 1° (optional with fixed quill Ø 210 mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Hjdpoq I Nlyofx Aacjfn Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Tool changer: 60-position chain magazine (vertical/horizontal change) Double-hinged chip conveyor (longitudinal) Perimetric enclosure (open top) Only inquiries from Germany will be answered.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Hfjdoxn A Spepfx Aacsn Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 12/1 with base frame -Clamping table: 340 x 280 mm -Travel: 370 mm Hodpfx Aaoir E Snjcofn -Spindle holder: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380 V -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 102-390, Hang 240-00 paper drill machine Hfedpfxexlr E Ho Aacen

Condition: used, Year of construction: 2010, operating hours: 3,030 h, Please contact ATS Norway for more information Hedpfjvgy E Usx Aacjfn Please provide reference number upon request: 18549 Specifications: Model year: 2010 Hours: Approximately 3030 hours Power: 55 kW Weight: Approximately 8000 kg Chassis: See pictures Belt width: Approx. 40 cm Engine: Deutz diesel engine Undercarriage commutation Winch Hydraulic water pump Remote control Toolbox Stabilizing legs Description: 2010 Comacchio MC500 drilling rig with only 3030 hours on the counter. The rig works as it should, but is missing an emergency stop wire. It can drill both horizontally and vertically, and is delivered quickly. Hours: 3030 Own weight: 8000 Total Weight: 8000 Kw: 55 Model: MC 500

Condition: good (used), Year of construction: 1984, Multi-spindle head, multi-spindle drill head, drilling gear Hfedjdym D Topfx Aacon -Joint multi-spindle head -Max. x drill -7x drill built-in collet: mm -min. Distance drill: mm -Weight: 11.3 kg Articulated multi-spindle heads are: variable tools for various machining operations such as drilling, thread cutting, countersinking, reaming, milling, turning, with which several holes can be machined at once.

Condition: used, Year of construction: 2005, Serial number: 1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21280 Specifications: 2005 model 16,457 engine hours Hfsdpjxbbcgsfx Aacen 9,610 drilling hours Weight: 8,500 kg KW: 88 Steel tracks Winch Description:Nemek 407 TS drilling rig for sale on behalf of customer – a versatile rig for drilling e.g. energy and water wells.The rig is described as operational but in need of minor service. Own weight: 8500 Engine hours: 16457 Model: 407 TS

Condition: used, Year of construction: 2010, Field of application: Construction Hfjdjvyf I Ijpfx Aacsn Serial number: 110M153xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19576 Specifications: - 2010 model - Hours: Approx. 2900 - Weight: 5200 kg - 62 kW - Tires (see pictures) - Winch - Radio control - Ready for delivery Description: Sandvik DC300R Drilling rig from 2010. Owner says he recently had it serviced. Ready for delivery. Hours: 2900 Total Weight: 5200 Kw: 62