Used Aircenter Sm 12 for sale (24,266)

Condition: excellent (used), Year of construction: 2007, Window fitting press Fedpfx Aiot T Srpokspp

Condition: used, Year of construction: 2018, operating hours: 17,325 h, functionality: fully functional, power: 5.5 kW (7.48 HP), pressure (max.): 8 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, KAESER Compressed Air Tandem System: AIRCENTER SM 10 (2018) & SM 9 (2011) including Air Treatment Description: For sale is a professional, fully coordinated compressed air tandem system from the premium manufacturer KAESER. Both systems operated together until recently to optimally handle peak loads and ensure maximum reliability. The package includes two ready-to-connect complete systems (each with an integrated refrigerated dryer and compressed air tank), as well as professional accessories for condensate treatment and filtration. Both machines are in well-maintained, fully functional condition. SYSTEM 1: KAESER AIRCENTER SM 10 (Premium All-in-One) • Manufacturer & Type: KAESER KOMPRESSOREN SE – AIRCENTER SM 10 • Year of Manufacture: 2018 • Rated Power: 5.5 kW • Max. Operating Pressure: 8.0 bar • Control: SIGMA CONTROL 2 • Integrated Refrigerated Dryer: Model ABT 15 (Refrigerant R-134a) • Operating Hours: approx. 17,325 h (Load Hours: 7,531 h) • Maintenance Status: Next service due in approx. 650 h • Special Feature: Valid UVV inspection sticker until 2026 SYSTEM 2: KAESER AIRCENTER SM 9 (Tandem / Redundancy Machine) • Manufacturer & Type: KAESER KOMPRESSOREN GmbH – AIRCENTER SM 9 • Year of Manufacture: 2011 • Rated Power: 5.5 kW • Max. Operating Pressure: 8.0 bar • Control: SIGMA CONTROL BASIC • Integrated Refrigerated Dryer: Present • Operating Hours: approx. 28,623 h INCLUDING AIR TREATMENT & FILTER ACCESSORIES: 1. KAESER AQUAMAT Oil Separator: For environmentally friendly and legally compliant separation of oil and condensate directly on site. Fedpfx Aez R Tacjikopp 2. Electronic Condensate Drain ECO-DRAIN: Reliable, level-controlled discharge without compressed air loss, including integrated fault signal contact for integration into the central system monitoring. Sale & Collection from Location: The systems are currently still installed and can be inspected and tested on site. • Dismantling: The professional dismantling and transport are the responsibility of the buyer. • Invoicing: The sale is exclusively for commercial purposes (B2B) with exclusion of warranty and liability for defects. A proper invoice with VAT will be issued.

Condition: new, Rollmak 3-Roll Round Bending Machine SM 90-12/3.0 Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display Sheet metal width 1250 mm Sheet metal thickness 3.0 mm max. Sheet metal thickness for pre-bending 2.5 mm Roller length 1250 mm Roller diameter 90 mm Smallest bending diameter 130 mm Weight 500 kg Dimensions L-W-H 1850 x 700 x 1200 mm Motor: 1.1 KW Equipment: Top and bottom roller, electrically driven Top roller can be swung out Taper bending device asymmetrical roller arrangement Fpsdpelu Enrjfx Aikep self-braking main motor separate control and operating panel safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: excellent (used), Year of construction: 2024, Exhibition and demonstration unit New Kaeser Aircenter SM 16 – 10 bar screw compressor with integrated refrigeration dryer and compressed air tank Sigma Control 2 control system Year of manufacture: 2024 Operating hours: few Pressure: 7.5 bar Rated power: 9 kW Delivery rate: 1.61 m³/min Fpjdpfxe Agw Dmj Aikjp Sound level: 66 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters volume Refrigeration dryer pressure dew point: +3°C Electrically controlled condensate drain: ECO DRAIN Dimensions length x width x height: 630 x 1220 x 1720 mm Weight: 440 kg Location: available from warehouse 54634 Bitburg - immediately available -

Condition: like new (used), The system is a complete surf finisher system including suction station + undersize screening station + complete water treatment + water tank from Rösler. If required, including robot + handling portal. The components are transferred by robot to a portal with holders and immersed in the rotating surf container. The deburring performance is 20 seconds. Immersion time corresponds to about the same performance as 10-15 minutes. in a conventional vibratory finishing machine. Rotating work tank RMSF 4/800 1 piece round plastic container - Working tank diameter: 850 mm Working tank depth: 500 mm 1 pc. quick coupling for easy changing of the working container 1 pc. drive motor, power 7.5 kW 1 pc. dosing device D1-K/320 SF (circulating water) on stand 1 pc. stand for enemas in the working container 1 piece flow monitoring (by means of flow monitor) Undersize screening: 1 pc. Grinding wheel return system 1 piece underframe as a stable welded construction 1 pc. balancer for weight compensation (sanding pad + hose + nozzle) including mounting frame - Suspension for hose on the base 1 pc. vacuum generator for generating a negative pressure - Connection of the line system to the transfer device of the vibratory finishing system - Suction hose with nozzle, length approx. 5 m 1 piece collection container 500 liters as a cyclone separator - for receiving the process media that are sucked out of the working container, - for delivering the process media to the screening machine - incl. automatically operated gate valve and hose for returning the process media to the screening machine 1 pc. spray nozzles for rinsing out the collection container 1 pc. 2-hand control for flap 1 pc. dosing device DZ1-K Rösler screening machine R 12/6 SM-E - for undersize screening - Total length: 1,400 mm - Overall width: 1,160 mm - Screen area: 1,200 x 600 mm - Delivery height: 1,065 mm - Step in the separation zone: 1 x 40 mm - Drive power of vibration motors 2 x 0.525 kW - Vibration motors arranged laterally - Engine speed: 1500 rpm - Operating voltage: 400 V, 50 Hz, 3 Ph N/PE Rösler centrifuge Z 1000 ASS-II-Turbo with automatic sludge discharge consisting of: Centrifuge Z 1000 * Aluminum alloy centrifuge rotor * Speed: 2,050 rpm * Reduced stripping speed via frequency converter * automatically retractable paring knife * Amount of sludge per peeling cycle: up to 25 kg * automatic residual water drainage * Long bearing service life due to special bearings that can be relubricated * electronic vibration monitoring Fodpfx Ajyngitsikepp * automatic rotor flushing Accesories 1 piece mud truck RSKM 30 1 pc. Combined waste water and circulation tank 700/700 liters 1 pc. flocculant dosing pump DP2 1 pc. Automatic post-dosing DZ-4/320 2 suction lances (vacancy monitoring) 1 pc. sound insulation package approx. 80 dB(A) 1 piece cooling unit RK 3 1 piece titration measuring kit for manual compound measurement

Condition: used, Year of construction: 1997, functionality: not functional, The following parts from a Chiron FZ 12 SM machining center, year of manufacture 1997, are for sale: Fpjdoxdhp Ejpfx Aikop 9 pcs. tool arms 1 pc. spindle 1 pc. Siemens spindle motor

Condition: used, Allgaire Large Vibrating Sieve 4 filter screens Screen diameter 1200mm High Efficiency: Achieves separation efficiencies up to 99% Gentle Treatment: Low-acceleration kinetic movement prevents particle destruction Fpedezz N Rxepfx Aikjp Ideal for fragile products Screen Cleaning: Equipped with integrated bouncing balls Heavy-duty German engineering with dust-tight cover options and quick-clamping elements.

Condition: new, Year of construction: 2023, Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine. Cut-to-length slitting machine SM 1250x8 lets you to cut the material into eight strips. The diameter of the rolls is 56 mm There are types of the sheet metal cut-to-length machines we produce: -Electric cut-to-length slitting machine SM 1250x4 (cutting for 3-4 strips) -Electric cut-to-length slitting machine SM 1250x8 (cutting for 6-10 strips) -Electric cut-to-length slitting machine SM 1250x12, SM 1250x20 (cutting for 12-20 strips) The operator of cut-to-length slitting machine can easily change the width of the strips and their numbers. There are special screws on the knives to do it. You can easily cut sheet metal right from the decoiler with our cut-to-length slitting machine. Cut-to-length slitting machine could be equipped with cross cutting knife. The machine has strong base to avoid deformation while cutting and lets to cut metal into 8 strips with the perfect quality. The cutting speed of the slitting machine is about 10 meters/minute. Fedpfx Aisf Epzgokspp Cut-to-length slitting machine is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour. The voltage is 380V. It could be used in environment with temperature from -10 to +45 Celsius degrees. Our enterprise has started to produce this kind of cut-to-length slitting machine (slitter) since 2008 so we have great experience in doing our job and can propose great solution to your business. To get more information about the price of this slitting machine and the way it could be delivered to your location just contact us. We will give you all the information you may need. Dimension: 170.00Sm x 120.00Sm x 100.00Sm Weight: 250.00Kg Engine: 1.1-1.5 kW

Condition: used, functionality: fully functional, Year of construction: 1989, Working width: 6.0 m Bending capacity: 1.25 mm steel Year of manufacture: 1989 Condition: Good Includes motorized slitting shear Includes digital control system (retrofitted) Fpedpfx Aszu Ilzeikjp

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Fpodjzwgiqspfx Aikjp

Condition: used, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Jorns, controller model: OP, working width: 6,000 mm, bending angle (max.): 145 °, number of axes: 5, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, total length: 6,800 mm, total width: 1,650 mm, Equipment: emergency stop, foot remote control, We are offering this used Jorns NL125-SM-OP-6 swiveling bending machine, manufactured in 1992. Manufacturer: Jorns Model: NL125-SM-OP-6 Fpjdpfezmy Eqjx Aiksp Year of manufacture: 1992 Condition: used Machine type: Swiveling bending machine If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12400, TSM/tsi oscillating sieve machines are used for the classification, screening, and dust removal of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine for sale has a diameter of 1200 mm and is equipped with 3 sieve decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare sieves with the following dimensions are included: • 16 mm x 1 piece • 15 mm x 1 piece • 0.5 mm x 1 piece • 0.16 mm x 1 piece • 0.9 mm x 1 piece • 0.86 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. Fsdpozmzbmofx Aikjpp The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: like new (used), Year of construction: 2019, operating hours: 3,123 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, Equipment: documentation/manual, The machine is immediately available in our Hannover/Germany warehouse and has been tested. ### Technical Data Manufacturer: Wittmann Type: SmartPower 60/210 Serial Number: Year of Construction: 2019 Operating Hours: 3,123 h Control System: Unilog B8 New Price: 75,000 euros Functionality: fully functional Condition: excellent ### Special Features Injection unit 210 Screw diameter: 35 mm Shot weight: 130 g/shot Injection pressure: 1500 bar (increased) Injection volume: 144 ccm Clamping force: 600 kN / 60 tons Tie bar spacing: 370 x 320 (h x v) Platen dimensions: 540 x 480 mm (h x v) Tool mounting height: 200 mm Maximum platen distance: 600 mm Ejector stroke/force: 150 mm / 26.4 kN Clamping unit: hydraulic Dimensions L/W/H: 3.6 x 1.3 x 1.9 m Weight: 3100 kg ### Extras - Centralized ejector with core pull device - Injection cylinder with hard chrome plating - Highly wear-resistant plasticizing unit (up to 350 °C) - Safety guard widened by approximately 550 mm - 4-way cooling water flow regulator - 21.5-inch multi-touch screen in Full HD ### Warranty - Warranty until first commissioning ### Freight *Various options are available* ##### Freight: Truck Loading - Free loading onto the buyer's truck or free delivery to your location with freight charges from the Hannover/Germany warehouse ##### Freight: Worldwide Delivery - Organization of worldwide delivery by container or box including customs clearance available ### Financing - Available upon request - lease purchase option ### Price - Available upon request ### Dealer Information You can inspect all of our machines in operation at our facility and, by appointment, receive a functional guarantee for most machines. - Tested and acquired from the original owner from ongoing production (no insolvency stock) - Exclusively from our own stock and property (no brokerage) - Immediate availability - Quality management in processing - Contractual security - Short response times and fast processing - Worldwide delivery including customs clearance possible #### Purchase - We purchase well-maintained injection molding machines (25T to 600T clamping force) from 2010 onwards. - Offer submission within 24 hours on working days. - In case of agreement: immediate transfer. No brokerage or other contractual loopholes. Over 30 years of company history as a supplier to the plastics industry. Rely on quality, trust and fair business practices. Fjdpfj Aiccpsx Aikjpp

Year of construction: 1989, condition: used, Working width: 6000mm, max. sheet thickness: 1.25mm, control panel: Siemens SIMATIC HMI, including electric rotary shear, an on-site inspection is possible. Fpedez Ekc Ijpfx Aikjp

Condition: ready for operation (used), Bosch SM 10/20-TC servo module SN:481559, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! Fjdpfx Aiox Eqyljkepp

Condition: ready for operation (used), Bosch SM 17/35-T / MNR 1070047820 GA1 power supply module, serial number: 366224, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. Agreed sales discounts do not apply to this item. Price upon request. Fjdpfx Ajx Eqyroikjpp

Condition: new, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: 101780.0, Exhibit immediately available: New Kaeser Aircenter SM 13 - 10 bar screw compressor with integrated refrigeration dryer and 270 liters compressed air tank Control Sigma Control 2 Year: 2025 Operating hours: 1 hr Pressure: 10 bars Rated power: 7,5 KW Delivery quantity 10 bar: 1.09 m³/min Sound level: 65 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Fedpfxsv Ebl Te Aikjpp Dimensions length x width x height: 630 x 1220 x 1720 mm Weight: 440 kg Visit our store. We always have a wide range of new and used compressors in stock!

Condition: good (used), Year of construction: 2004, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, total height: 2,270 mm, total length: 5,400 mm, total width: 2,150 mm, overall weight: 6,000 kg, CNC Lathe with c-axis MORI SEIKI - NL 2500 SMC/1250 MACH-ID 9884 Make: MORI SEIKI Type: NL 2500 SMC/1250 Control: MAPPS YOP: 2004 Fsdo Agu Rcopfx Aikepp Chip conveyor Coolant tank Full C-Axis 360.000 Live tools Tooling package optional KITAGWA Chuck on main Max. turning Ø: 356mm X-Axis: 260mm Z-Axis: 795mm Spindle bore: 80mm Speedrange: 4000Rpm Spindle power: 18.5kW Subspindle speeds:6000Rpm Subspindle bore: 80mm ATC / revolver: 12 Speed live tools:6000Rpm Chip conveyor: Yes Tool eye: Yes Length: 5400mm Width: 2150mm Height: 2270mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2012, 750mm Swing, 500mm max. machining diameter, 1300mm max turning length, 3000rpm main spindle, 65mm bar capacity, 8,000rpm milling 20kW, C axis 0.001 degrees, Fpodpfjxqyg Nsx Aiksp Y axis - 90/+120mm, 40 station ATC, , milling speed 4,000rpm, 30kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant, tool setter, parts catcher, barfeed unit.

Condition: used, Year of construction: 2006, functionality: fully functional, UHLMANN BLISTER LINE Blister line for pharmaceutical production in cleanrooms. From a GMP-compliant cleanroom environment and regularly maintained, fully automated and modular, easy to integrate into existing production lines. Comes with complete technical documentation, and has been decommissioned for internal production. Consisting of: Fedozbhnwepfx Aikopp 1) UHLMANN BLISTER PACKER, MODEL UPS 4 Year of construction: 2006 PRODUCTION CHARACTERISTICS - Output: 15-50 cycles/min - Forming width: 62 - 226 mm (min - max) - Blister format: min. 60 mm; max. 140×39 mm - Depth: pvc 12 mm; alu 10 mm ENERGY CONSUMPTION - Voltage: 3/N/PE AC 400 V - Current: 30 A DIMENSIONS - Weight: 4.950 kg 2) UHLMANN CARTONING MACHINE, MODEL C2206 Year of construction: 2005 PRODUCTION CHARACTERISTICS - Max. output: 200 cartons/min. - Max. carton size: 130 x 100 x 200 mm - Max. no. of blisters: 10 - Closures: tuck-in, hot-melt - Products: blisters, bottles DIMENSIONS - Weight: 6,000 kg ENERGY CONSUMPTION - Voltage: 3/N/PE AC 400 V - Current: 15 A 3) INOVA LABELLER, MODEL EKK 62 Year of construction: 2006 ENERGY CONSUMPTION - Voltage: 230/400 V - Frequency: 50 Hz - Current draw: 9 A 4) INOVA ASSEMBLY AND EJECTION UNIT, MODELS VSM1221 + TD210 Year of construction: 2006 ENERGY CONSUMPTION (BOTH MACHINES) - Voltage: 230/400 V - Current draw: 5 A 5) BAUSCH + STRÖBEL TRAYPACKER, MODEL ESS1001 Year of construction : 2013 PRODUCTION CHARACTERISTICS - Max. output: 12.000/hour - Label length: 20 mm - 120 mm - Label height: 15 mm - 80 mm DIMENSIONS - Weight: 900 kg 6) HAPA INKJET PRINTER, MODEL H-230 Year of construction: 2005 PRODUCTION CHARACTERISTICS - Max. cycles: 120 cycles/min - Max. print speed: 21.6 m/min - Printhead resolution: 360 dpi - Belt width (min - max): mm 64 - 310 - Feed length (min - max): mm 30 - 180 - Print length (min - max): mm 30 - 180 7) SORTIMAT BLISTER HANDLER, MODEL CL400 VTS Year of construction: 2016 DIMENSIONS - Weight: 2,340 kg ENERGY CONSUMPTION - Power: 3.4 kW / 5.0 A 8) UHLMANN BUNDLING MACHINE, MODEL E 3060 Year of construction: 2006 PRODUCTION CHARACTERISTICS - Output: 60 bundles - Carton sizes: 130 x 105 x 250 mm (max) - Bundle size: 250 x 150 x 250 mm (max) - Infeed capacity: 500 cartons DIMENSIONS - Size: 1,400 x 2,000 x 4,300 mm (approx.) - Weight : 2,100 kg ENERGY CONSUMPTION - Voltage: 3/N/PE AC 400 V - Current: 18 A 9) OPTIMA SYRINGE DISPENSER, MODEL SH120 Year of construction: 2008

Condition: excellent (used), Year of construction: 2016, operating hours: 6,700 h, Kaeser SM 12 (2016) – Screw Compressor in Excellent Condition For sale: Kaeser SM 12 screw compressor from 2016 in excellent, well-maintained condition. Reliable, quiet, and energy-efficient compressor – ideal for workshops, print shops, or manufacturing facilities. Technical specifications: Manufacturer: Kaeser Kompressoren Fpodpfxsxprwke Aiksp Model: SM 12 Year of manufacture: 2016 Motor power: 7.5 kW Free air delivery: approx. 1.1 – 1.3 m³/min (depending on pressure level) Operating pressure: 8 / 10 bar Voltage: 400 V / 50 Hz Integrated Kaeser Sigma Control Basic Low-noise operation, compact design

Condition: excellent (used), Akbend ASM140 Bending Rolls 3 Rolls 140mm top roll Fpedpsz Hdv Defx Aikop 1250mm length x 5mm thickness Year 2007 Motor power 2.2kw

Year of construction: 2004, condition: good (used), Spritzgiessmaschine bis 5.000 KN Machine type: Krauss Maffei KM 2300-12000 MC Year: 2004 Control: CNC MC4 Working hours: 93.900 h SPECIFICATIONS Closing unit Closing force: 23,000 kN Maximum tool opening force: 1,420 kN Thrust force of the movable plate (opening): 227 kN Clamping force of the movable platen (closing): 203 kN Tool clamping area (H x W): 2,830 mm x 2,400 mm Stand spacing (H x W): 2,000 mm x 1,600 mm Tool opening stroke: 2,600 mm Min. tool height: 1,100 mm Maximum tool height: 1,800 mm Maximum tool spacing: 3,700 mm Hydraulic ejection stroke: 350 mm Ejector force (forward/reverse): 415/115 kN Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1,389 bar Displacement: 8,588 cc Projectile weight (PS): 7,815 g Injection capacity: 1,019 cc/s Fedezi Sfzopfx Aikjpp Screw speed: 113 rpm Maximum plasticizing capacity: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Rated power of the pump motor: 132 kW Installed heating capacity: 997 kW Adjustable cylinder heating zones: 7 Number of drying cycles: 350 per hour Tank capacity: 2,500 L Dimensions and Weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total weight of the machine: 143,000 kg Maximum mold weight: 62,000 kg LRX 1000 Robot X-Axis: 2.000 mm Y-Axis: 3.000 mm Z-Axis: 5.000 mm

Condition: ready for operation (used), Year of construction: 1999, We are offering this used Amada LASMAC LC-1212 A3 laser cutting machine, manufactured in 1999. Manufacturer: Amada Model: LASMAC LC-1212 A3 Year of manufacture: 1999 Fpjdpfx Ajz Rvg Dsikjp Condition: ready for use If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 2012, condition: excellent (used), Used compact / small foot print Amada Lasmac LC – 1212 a IV NT flat bed 2d cnc laser cutting machine for sale: Fully serviced single bed very clean Amada LC – 1212 a IV NT cnc laser – Video at the bottom of this listing Specification: Most recent work carried out by Amada UK: New turbo blower recently fitted New lenses and mirrors in August 2022 Fsdpfoimwcbox Aikjpp Fully serviced with Amada Uk Year / New 2012 Power: 2.5kw Machine Model: LC – 1212 a IV NT Travel method: X-Axis Material Travel, Y Axis: laser Beam Travel Axis Travel Distance X x Y x Z M: 1270 x 1270 x 300 Positioning Speed X x Y x Z m/min: 80 x 80 x 60 Cutting feed rare X x Y m/min: 0 – 20 Control Method: X-, Y- and Z-axes (simultaneously controlled) + B – axis Max. sheet size X x Y x Zmm: 2540 x 1270 x 300 Repeatable positioning accuracy mm: +0.005 Oscillator model: AF2000E-LU2.5 AF4000E Oscillation Process: fast axial flow, high frequency discharge excitation Ideal if you are looking to bring laser cutting in house and space is a premium Delivery and installation can be arranged AMADA LASMAC LC1212 MK IV 2.5 KW NT LASER CUTTING MACHINE MACHINE CAPACITY 1270 X 1270 2540 WITH ONE REPOSITION