Used Aircenter Sm 12 for sale (62,689)

Condition: used, functionality: fully functional, machine/vehicle number: M5782*10924, Year of construction: 2002, operating hours: 25,700 h, load capacity: 41,000 kg, lifting height: 14,900 mm, fuel type: diesel, mast type: telescopic, construction height: 4,500 mm, power: 243 kW (330.39 HP), empty load weight: 68,000 kg, total length: 8,250 mm, drive type: Diesel, construction width: 4,250 mm, Full-container reach stacker Chassis number: M5782*10924 Mast type: Telescopic Transmission: Clark 15,5HR36432-4 Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Pneumatic Front tire size: 18.00-25 Front tire condition: 40 - 60% Rear tire type: Pneumatic Rear tire size: 18.00-25 Bsdpfx Abjwyqyuobsdk Rear tire condition: 20 - 40%

Condition: good (used), machine/vehicle number: 3430, Year of construction: 2005, load capacity: 25,000 kg, lifting height: 5,000 mm, mast type: duplex, fork carriage width: 250 mm, fork length: 2,400 mm, total length: 6,300 mm, total width: 3,020 mm, operation weight: 34,600 kg, additional equipment features: Weight indicator, Equipment: lighting, SMV SL25-1200A from Uniktruck Bdsdpfx Aev Rrcajbbok

Condition: excellent (used), functionality: fully functional, pressing force: 31 t, bale length: 1,200 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 400 kg, overall weight: 6,200 kg, empty load weight: 6,200 kg, Equipment: documentation/manual, Baler, channel baling press. Automatic 4-wire tying. Very good condition. Serviced by the manufacturer since new. The press has undergone a complete overhaul. Adjustable bale length: 600–1200 mm. Perfect for baling paper trimmings, waste paper, film, textiles, and more. Bjdjxzizqopfx Abbsdk

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total width: 2,583 mm, total height: 3,994 mm, total length: 6,661 mm, Equipment: documentation/manual, HSM VK 4812 P Year of production: 2015 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Bjdpoxx N Hzefx Abbedk Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), empty load weight: 12,000 kg, volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Bedpfxovtpq He Abbjdk Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2013, Centrifugal oil mist filter system Losma type Darwin 1200 Capacity 1200 m³ per hour Several units in stock Bdodpowrt Ifjfx Abbek

Condition: used, functionality: fully functional, machine/vehicle number: M7759*13016, Year of construction: 2008, operating hours: 18,990 h, load capacity: 52,000 kg, lifting height: 4,750 mm, fuel type: diesel, mast type: simplex, construction height: 5,430 mm, power: 257 kW (349.42 HP), fork length: 2,000 mm, empty load weight: 63,460 kg, drive type: Diesel, Heavy-duty forklift truck - Diesel Bjdpswwnl Asfx Abbedk Chassis number: M7759*13016 Load center: 1200 mm Fork width: 300 mm Fork thickness: 150 mm Mast type: Standard Transmission: Clark Dana 15.5HRTE27418-60 Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Pneumatic Front tires size: 18.00-25 Front tires condition: 60–80% Rear tires type: Pneumatic Rear tires size: 18.00-25 Rear tires condition: 60–80% Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container handlers, reach stackers, forklifts, and terminal tractors in stock at our Oldenburg facility. Visit our homepage - hinrichs-Forklifts. Leasing, hire purchase, and financing on fair terms are always possible with us. We are also happy to purchase your used equipment outright, even if you are not buying a machine from us. Call me, Marco Levermann – I would be pleased to advise you in detail about this MAKE - MODEL. By the way: Our specialist forklift workshop is focused on repair and refurbishment of large equipment from 8 tons upward. We are also happy to display your vehicle with us for consignment sale. Sideshift, fork positioner, Front working lights, heater, full cabin, Central lubrication system 2 x camera front and rear.

Year of construction: 2004, condition: ready for operation (used), For sale is an injection molding machine brand Krauss-Maffei and type 125-520 C2 The machine was in a company that attaches great importance to cleanliness and maintenance Year of manufacture 2004 Pneumatic valve gate 2X Hydraulic core pull 83000 production hours Clamping force of the mold: kN 1500 MC 4 control system with color monitor, integrated control panel 4 additional cylinders 1* D35 /2* D40 / 1* D45 additionally included Prices plus VAT Bodpfx Abslkbhwebjdk Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: used, Year of construction: 2025, operating hours: 50 h, functionality: fully functional, machine/vehicle number: SN078146, 12 months warranty / 1800 operating hours Bdodpfexp Nd Ijx Abbjk

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 12 t, bale length: 1,200 mm, bale width: 700 mm, bale height: 500 mm, bale weight: 450 kg, total length: 5,500 mm, Equipment: documentation/manual, The machine is in very good condition and regularly serviced. Manufactured in 1994, it was purchased from the original owner and is ready for use. The baler is started manually by a button or fully automatically using a photocell in the loading chute. Cutting blades mounted on the pressure plate cut the material and compress it in the baling channel. Once the desired length is reached (bale length adjustment is available), the bale is automatically tied after several baling cycles. The bale can be tied with wire, twine, or polypropylene tape. Automatic baling system with a 12-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Baling pressure: 120 kN Bale size: 700 x 500 x 600 - 1200 mm Bdedpfsxw R D Ejx Abbjk Bale weight (depending on material): 280-450 kg Transport length: 5.5 m Weight: 3500 kg Drive power: 7.5 kW Transport costs depend on weight, volume, and, above all, distance. The following information is important for inquiries: Delivery address (postal code and city name), but further details require a phone call. Therefore, please inquire about transport costs and other delivery methods by calling us.

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Bdjdpfx Abexqx Avebjk Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW

Condition: good (used), Year of construction: 2004, functionality: fully functional, Clamping force: 1250 kN Screw diameter: 35 mm Tie bar spacing: 470 mm Shot weight: 142 g Minimum mould height: 300 mm Bdodpfowthfuex Abbsk Total weight: approx. 6,000 kg

Condition: used, Year of construction: 2004, Krauss Maffei KM125-390 C2 (Year of manufacture 2004) Clamping force: 125 kN Operating hours: approx. 63,000 h Bsdpfx Abjw D Rmiebsdk The machine can be inspected at any time

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Technical Data Year of manufacture: 2007 Clamping Side Clamping force: 13,000 kN Max. opening stroke/installation height: 2,300 mm Max. distance between mounting plates: 4,000 mm Min./max. mold installation height: 1,000 - 1,700 mm Max. platen height: 1,910 mm Min. mold size: 1,020 x 820 mm Clear tie bar spacing: 1,500 mm Nozzle radius: R40 mm Mold weight: 29,000 kg Ejector stroke: 350 mm 1st Injection Side Screw diameter: 120 mm Shot volume: 6,786 ccm Bsdpfjw Rfkhex Abbedk 2nd Injection Side Screw diameter: 105 mm Shot volume: 5,195 ccm NC5 Control Core pulls AWS/DS: 1/1

Condition: used, machine/vehicle number: M11643*18226, Year of construction: 2018, operating hours: 17,465 h, load capacity: 20,000 kg, lifting height: 6,500 mm, free lift: 3,250 mm, mast type: duplex, construction height: 5,060 mm, power: 185 kW (251.53 HP), empty load weight: 38,500 kg, drive type: Diesel, construction width: 3,000 mm, Empty container stacker Fahrgestellnummer: M11643*18226 Load center: 1200 ISO class: Terminal West Mast type: Duplex Transmission: ZF-WG191 Condition: Ready for use and fully functional Technical condition: good Front tires Type: Pneumatic Front tires Size: 14.00-24 Front tires Condition: 40 - 60% Rear tires Type: Superelastic Rear tires Size: 14.00-24 Rear tires Condition: 20 - 40% Description: Headspreader Sideshift, fork positioner, 3rd valve, 4th valve, front work lights, heating, full cab, Bodpsuh A R Dofx Abbedk central lubrication Camera ELME 508 Headspreader movable cabin ( Forx 2,40 m available )

Year of construction: 2025, condition: new, working width 950 mm workpiece width - max. 1,0 - 50 mm sandingbelt width 970 mm sandingbelt length 1900 mm weight of the machine ca. 1,8 t The SMD 123 RE is a universal entry-level machine for all-round deburring Uniform edge rounding and surface grinding of sheet metal dry process. * Suitable for processing steel, stainless steel and aluminium. * The non-slip conveyor belt enables safe transport and the Machining even of small workpieces. * The two rotor heads ensure an all-round uniform Bedpfovfhm Djx Abbsdk Edge rounding and a directionless finish. * The intuitive operation via touch panel allows every employee get to grips with the machine quickly. * The SMD 1 models are installed and ready for operation in a short time. * The compact design saves valuable production space. * Low acquisition and operating costs lead to short amortization periods and guarantee economical processing of your workpieces. consisting of: - Grinding machine SMD 123 RE (kit): - SMD 123 RE conveyor belt cleaning - SMx xx3 - sanding belt +120 Cubitron II, W=970, L=1900 - SMD 1x3 set grinding flap roller 3-piece. P120 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Condition: good (used), Year of construction: 2011, operating hours: 20,580 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, input current: 59 A, overall weight: 12,000 kg, transport height: 2,750 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), transport width: 2,300 mm, transport length: 8,500 mm, tank capacity: 300 l, Good day, We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Bsdst H Rcaspfx Abbedk Manufacturer HSM Type VK 4812 Year of manufacture 2011 Operating hours 20,580 hours Main press force 48 tonnes Drive power 30 kW Machine weight press 12 tonnes The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: good (used), CALIBRATING SANDER WITH OSCILLATING ABRASIVE BELTS MAX LENGTH 1200MM MAX WIDTH 1200MM MAX HEIGHT 230MM BELT DIMENSIONS 250x3280MM Bedpfxevtrhus Abbedk SIDE WORK TABLE 920x350MM BELT MOTOR 7.5KW=7.5KW OSCILLATION MOTOR 0.15KW=0.15KW ABRASIVE BELT SPEED 25M/SEC OVERALL DIMENSIONS 2200x1900x1150MM NET WEIGHT 1200KG

Condition: used, 4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks Bedpjfpif Defx Abbodk -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg

Condition: new, functionality: fully functional, Demag drive: KBA125 / T12 / FG06 / KBA80 Condition: New! Bsdpfx Abjwv Shrsbjdk T12 i=24.8 shaft diameter 80 mm KBA125 B-4 FG08 i=9.87 KBA80 A-4

Year of construction: 2018, operating hours: 17,465 h, condition: used, power: 185 kW (251.53 HP), empty load weight: 39,600 kg, lifting height: 6,500 mm, free lift: 3,250 mm, mast type: duplex, construction height: 5,060 mm, fork length: 2,400 mm, drive type: Diesel, load capacity: 20,000 kg, construction width: 3,000 mm, machine/vehicle number: M11643*18226, Heavy-duty forklift truck - Diesel Fahrgestellnummer: M11643*18226 Load center: 1200 ISO class: Terminal West Mast type: Duplex Transmission: ZF-WG191 Condition: Ready for use and fully functional Technical condition: good Front tires Type: Pneumatic Front tires Size: 14.00-24 Front tires Condition: 40 - 60% Rear tires Type: Superelastic Rear tires Size: 14.00-24 Rear tires Condition: 20 - 40% Description: Headspreader available Sideshift, fork positioner, 3rd valve, 4th valve, front work lights, heating, full cab, Bdedpeuh Atlofx Abbok central lubrication/ central lubrication Camera movable cabin ( ELME 508 Headspreader available )

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 25230 € 481.89 € 1250x2500 mm Bsdpfjwiryujx Abbsdk HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 470 l 500 kg/m² 3060 mm 1760 mm 1500 mm 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25 mm price € 26.820,- € 28.440,- € 30.100,- € 33.290,- (Hypertherm MaxPro200 and KJELLBERG plasma sources available on reques) OPTIONS: water tank to quickly fill and drain thetrough € 2.560,- height adjustment by arc voltage € 2.450,- set-up laser € 240,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: used, functionality: fully functional, P1000 / P1200 H-20 Outercasing & ropebarrel 4/1 Rope diameter 20 mm Bjdpfx Abjwd Iyaebjdk Inclusive 4/1 traverse In exellent condition !

Condition: new, Year of construction: 2024, neu 2024 2517 prompt, Zwischenverkauf v Deutschland 40130 € 705.17 € 1 36920 € 1500x3000 mm Hypertherm Powermax 125 25 mm 25 mm 57 mm 25 mm Bodpfxowva Iae Abbedk 125 A 24 m/min 1/10 mm 400 kg/m² 3560 mm 1960 mm 1500 mm 650 kg DEMO MACHINE compressed air powered plasma sourceHYPERTHERM Powermax 125 CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTIONS: Height adjustment by arc voltage Set-up laser Suction bridge (prepared for suction diam. 160 mm)

Condition: reconditioned (used), functionality: fully functional, Demag gearbox Demag P1000 / P1200 Bedpsvx N Nmjfx Abbjdk Speed: 10 mtr/min Price on request For information: Corresponding drum/jacket/drive shaft also available. Price on request.