Laser

AMADA PROMECAM Lasmac LC 1212

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Pedpeza E S Defx Akisgu

Condition: excellent (used), functionality: fully functional, machine/vehicle number: NT2000, total height: 4,300 mm, total width: 3,300 mm, total length: 2,980 mm, load capacity per storage section: 250 kg, construction height: 435,000 mm, input voltage: 415 V, warranty duration: 12 months, load capacity: 250 kg, Equipment: documentation/manual, safety light barrier, Kardex 500 Shuttle NT2000 1 Available 415v 3 phase netural & Earth 16 amps into an isolator required Colour Blue & Grey Max load per tray 250Kg Number of trays 20 per machine Psdporgqxmsfx Akisgu Machine Dimensions 4300mm Height x 3300mm Width x 2980mm depth Tray Dimensions 3000mm width x 860mm depth Delivery, installation & 12 months warranty available Supply only available without warranty Service & Maintenance contracts available for these machines

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Pedpox Ew Dqsfx Akiogu Technical data: - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: new, Year of construction: 2024, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, total length: 7,600 mm, total height: 3,000 mm, total width: 2,650 mm, overall weight: 14,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, DYAS 3 BDC CNC Beam Profile Machining Center Operating Range for Section Min. 200 x 80 mm / Max. 1200 x 500 m Operating Range for Length Min. 2000 mm / Max. 12000 mm (Gross: 12500 mm ) Drilling Head (Spindle) 3 Spindle Speed 50-4000 (stepless) rpm Spindle Power 22 Kw Podpegbdpkjfx Akiogu Spindle Torque 280 Nm Tool Changer 6 for each spindle , total 18 Tapping Capacity M10-M30 Bandsaw (Optional) Cutting Speed 20-100 m/min / Mitering Angle +60°/-45°

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Pgjdpefz U S Eofx Akisu - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 540 h, pressing force: 1,000 t, stroke length: 800 mm, reverse speed: 150 mm/s, table width: 2,300 mm, table length: 3,000 mm, total length: 4,500 mm, total width: 3,500 mm, total height: 6,000 mm, overall weight: 101,000 kg, working height: 1,300 mm, working range: 1,300 mm, Hydraulic press 1000t - in very good condition, used for stamping first series parts from progressive tools -we bought this maschine as new for 340 000 EUR in year 2019 Podoyilh Ijpfx Akijgu

Year of construction: 2024, condition: new, Overband plate magnet with cleaning mechanism Made of stainless steel 1.4301, tightly welded Includes a drawer for cleaning Dimensions: 800x500x180mm 4 M16 ring bolts on the back These two lifting magnets were used by one of our customers as a "police magnet" in the meat processing industry. Both overband magnets are in perfect condition. The price mentioned refers to 1 piece. Currently, 2 pieces are available for immediate delivery from stock! All information is without guarantee, subject to availability! Conveyor belt, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator Our core competence lies in providing our customers with exactly what they really need. We work together with our customers to develop customized, individual solutions and deliver corresponding systems from our own production. Please feel free to contact us by phone to find a suitable solution for your application. Overband plate magnet Made of stainless steel 1.4301, tightly welded Includes a drawer for cleaning 420 x 420 x 200mm 420 x 420 x 250mm 620 x 420 x 200mm 620 x 520 x 200mm 800 x 500 x 200mm 800 x 520 x 250mm Completely welded stainless steel housing to protect the magnet core Ring eyes for suspension Cleaning drawer for easy removal of accumulated contaminants. Podpfshfwmdox Akiegu Mounting possible above all types of conveyor systems...

Condition: excellent (used), For sale: OMIS 5 TON bridge crane, ideal for industrial use in a warehouse or factory building. 🔧 Main features: Capacity: 5 tons (5000 kg) Type: double-girder overhead crane Brand: OMIS (Italy) Pgsdpfxoy Aymis Akisu Span (rail distance): 20,000 mm (20 m) Hook travel: 6.6 m Robust box girder structure ⚙️ Performance: Lifting speed: 4 m/min Bridge travel speed: 30 m/min (fast) – 7.5 m/min (reduced) Trolley travel speed: 16 m/min Power supply: 380V three-phase – 50 Hz Pendant push button controls 🏭 Usage: Always operated inside a covered industrial building Ideal for workshops, steel fabricators, and heavy-load handling

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Pgsdpfx Ajwbginskiju Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 x-axis 500 mm y-axis 350 mm z-axis 610 mm Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Weight 3,200 kg with 4 axes Pgodewmwrdepfx Akisu SK 30 tools approx. 40 tool holders The machine has the following problems: - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)