Used 6 Spindle Automatic Lathe for sale (66,234)

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: bar feeder, chip conveyor, A rebuild was carried out by Index for €380,000! EQUIPMENT Prepared as a double 3-spindle machine Part pick-off device Thread cutting gearbox Dkjdpfx Aoyx Tzrsqvsn Cucci Giovanni integral loader Brankamp tool breakage monitoring and tool monitoring Cucci Giovanni bar feeder (2015) Knoll chip conveyor (2015)

Condition: repair required (used), 3x SCHÜTTE SF40 offered as a package at a low price – machines require overhaul Dsdpfx Aqoylhp Novekn

Condition: used, 2x 6-spindle bar automatics as a package Make: INDEX Dksdpfx Aqsylhlqeven Model: MS25E (1 machine defective, used as a parts donor)

Condition: used, Year of construction: 1987, 6-spindle bar automatic lathe Manufacturer: INDEX Dkodpjw S Hd Sofx Aqvsn Model: MS25 Year of manufacture: 1987

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: Dkodpoin Ub Tefx Aqvjn The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: good (used), Year of construction: 1979, Schütte SF51 6-Spindle Automatic Turning Machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle automatic turning machine with a 51 mm spindle bore, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch, which offers high process stability and flexibility in turning, drilling, and tapping. The machine is valued for its stability and flexibility in the production of demanding workpieces. Technical condition: The machine has been regularly modernized and is in like-new condition. Maintenance: Exclusively professional, scheduled maintenance by specialists. Manufacturer: Schütte Type: SF 51 Curve-controlled multi-spindle automatic lathe Number of spindles: 6 main spindles Control: Conventional Spindle bore: 51 mm Maximum feed rate: 125 mm Maximum turning length: 102 mm Maximum drilling depth: 102 mm Tapping unit Chip conveyor 6-station loading magazine Voltage: 400 V Removal by buyer Due to a planned production changeover, a fixed time window for collection has been defined: - Period: Week 20 / 2026 - Date window: May 11, 2026 to May 15, 2026 - Advantage for you: Precise scheduling certainty for your machine transport and commissioning at your plant. All costs for professional dismantling are already included in the purchase price. Item location: 21079 Hamburg "Everything from a single source: We're happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request! Dkodjyhpvpopfx Aqvsn

Condition: used, Technical details: number of spindles: 11 Stück number of stations: 11 Stück taper: SK 40 air pressure - required: 6 - 7 bar Djdpfx Asu Idw Ieqvskn total power requirement: 13 kW weight of the machine ca.: 10,2 t space requirements of the machine approx.: 4,0 x 4,0 x 3,4 m dimensions of machine: 3,4 x 3,45 x 2,9 m dimensions electric cabinet: 2,1 x 0,4 x 1,9 mm Transfermachine (drilling & cutting) Accesssories optional please enquire to this additional position! - workpiece holding turret Ø 1000mm with tool holder for 8 tool clamping stations, self centering clamping chuck jaws between the jaws, max. 20mm chuck jaw stroke ( oil pneumatic circulation) - 11 working stations with Sk40 intake (right 4x Drill-& Mill spindle and 1x mitU-axis , left 4x Drill-& Mill spindle ) - drill unit 8x spindle stroke 125mm, feed 0 - 2 m/min, 164 - 1005 rpm with 12 gears stages - thread cutting unit working stroke 125mm, rotation direction clockwise and counter clockwise, 31,5 - 194 rpm with 12 gears stages - opposite located drill units 8 pieces with SK 40 holder - coolant device with supply - control via switch panel - with swarf basin L: 1200 x W: 740 x H: 220mm i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: Dkjdpfxsu Idxfe Aqvsn - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: spindle taper: SK40 spindle stroke: 175 mm number of spindles: 8 Stück number of stations: 5 Stück cycle time: 15-20 sec revolutions per minute: bohren/drill/taladrar 225...1037 U/min. revolutions per minute: gewinde/threading/roscar 50...316 U/min. feed: 0,2 m/min total power requirement: 30 (40PS) kW weight of the machine ca.: 9,0 t space requirements of the machine approx.: 3,9x2,4x2,5 m dimensions of machine: L:3,9xB:2,2xH:2,7 m dimensions L x W x H: +Anlage/plant/planta 2,7x2,52x2,25 m The machine will be on a General overhaul (pictures from original condition at the former Company) The machine has been constructed for the metal cutting process of workpieces in one clamping session. Especially blanks made of brass with a diameter 90mm x approx 100mm length would be machined with this machine. description: - workpiece support with switch plate with clamping station type round table with horizontal axis with 5 workpiece stations Dksdpfx Aqou Idycjvjn processing units: - drill spindle and thread cutting units - drill capacity up to 2 3/4" and 81,53mm in brass - thread cutting up to 2 1/2" und metric thread Machine is equipped with a feeding-and unloading unit for workpieces. ( feed capacity 3 -4 pieces/min and cycle time 15 - 20 sec.) furthermore incl. coolant device i.D. *

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm Dksdpfx Asu Idwbsqven TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed - operation through control panel - chip box - counting mechanism - elevated platform with stairs i.D. *

Condition: used, Technical details: number of spindles: 9 Stück total power requirement: 83,0 kW weight of the machine ca.: 17,0 t Dksdpfx Aqou Idvkjvjn TRANSFERAUTOMAT with 9x drill-and mill spindles - right 3x drill-& mill spindle, 9 stages, driven, fixed and left 3x drill-& mill spindle 9 stages, driven, fixed such as radial 3x drill-& mill spindle with 9 stages, driven, fixed i.D. *

Condition: used, Technical details: number of spindles: 9 Stück Dedpsu Idwnsfx Aqvskn weight of the machine ca.: 10,2 t Transfer machine with 9 Drill-& Mill spindles - right 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages - left 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages such as radial 2x drill-& mill spinlde flexible and 1x thread cutting spindle 9 stages, flexible i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 83,0 kW weight of the machine ca.: 17,0 t space requirement of the machine approx.: LxBxH: 5,0 x 6,2 x 3,8 m dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm Dksdpfxeu Idxrj Aqven dimensions electric cabinet: Nr.3: LxB.H: 650x600x2300 mm dimensions electric cabinet: Nr.4: LxBxH: 1300x650x2350 mm TRANSFER MACHINE with 3 work station and 15 drill & mill spindles - for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, clock cycle of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 4x drill-& mill spindle with 18 stages and 1x thread cutting spindle hydr. 14 up to 224 U/min, left 4x drill and mill spindle with 18 stages and 1x thread cutting spindle hydr. from 14 up to 224 U/min such as radial 3x drill -and mill spindle from that 1x U-Axis and 1x thread cutting spindle 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Year of construction: 1998, Package of 3 Schütte S32PC Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: S32PC Dksdpfey Nk I Dox Aqvjn Yob: 1998 One machine is operational; the other two can be used for spare parts Includes IEMCA PRA40/33/P loading magazine, built in 1997 (rack type loader) Includes IEMCA PRA40/42/F loading magazine, built in 1999 (bundle loader) Includes IEMCA SIR325 loading magazine (integral loader with bundle magazine) tooling included in delivery may differ from the pictures Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm Djdpfx Aovh Naqjqvokn hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant

Condition: ready for operation (used), Offered is a cam-controlled automatic lathe. Bar capacity: 29mm, speed range: max. 3750rpm, main drive: incrementally adjustable via change gears, number of tool slides: 4, control: cam control. Equipped with bar loading magazine, coolant device, tool turret, various tool holders, change gear set. Note: Sale is without extraction system. Weight: approx. 2200kg incl. magazine, overall dimensions X/Y/Z: approx. 5500mm/1300mm/1750mm. Inspection possible by arrangement. Dksdpsy Tx N Rofx Aqvjn

Condition: used, Year of construction: 2008, Technical details: number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 4,5 t spindle drive motor: 11 kW Djdoluhcgepfx Aqvekn

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Dksdpfx Aqjy Ed Atsvsn Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Condition: used, Year of construction: 1987, Technical details: number of spindles: 8 spindle passage: 51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 Dksdpfxsiay Sfo Aqven electronical trip dog control “Balluff” clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1991, Technical details: Dodpfx Aol Rmqpeqvekn number of spindles: 6 spindle passage: 51 mm Schutte SF51 DNT, yob. 1987, our ID #61868 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF51 DNT Yob: 1987 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=51mm electronic cam control Balluff gripper in position 6 for backworking, sorting chute independent longitudinal feed layer 5 screw chip conveyor Tapping couplings Interface for: Bar feeder IEMCA PRA Bar feeder IEMCA PRA40/33/F Scope of delivery without the blue chip conveyor The tooling will differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1994, Technical details: number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at) or Dkodpel Su Rxofx Aqvjn *

Condition: used, Year of construction: 1993, Technical details: number of spindles: 8 spindle passage: 32 mm Dkodpfsrgt E Rex Aqvon Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 Dnt Yob: 1993 eight-spindle automatic lathe eight main spindles for bars up to D=32mm Modernized control: Siemens Sinumerik Motors: renewed modern motors suitable for modernized control system Electronic trip dog control: Balluff CNC cross slide position 5 cross CNC cross slide position 6 cross Preparation for gripper in position 8 (gripper optional) Independent feeds Thread cutting couplings integrated bar loader: Pietro CUCCHI; type: rack type magazine The scope of delivery regarding the tooling equipment could be different like pictures. *

Condition: used, Year of construction: 2002, Technical details: number of spindles: 8 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AG20 Yob: 2002 Dsdpfewutgaox Aqvokn eight-spindle automatic lathe 8 main spindles for bars up to D=20mm control: Siemens 840D 1x polygonal turning/thread milling device (new 2011) 1x polygonal turning/thread milling device for long turning (new 2011) 1x thread cutting/quick drilling spindle (new 2011) 1x pick-up device incl. various pick-up collets 4 cnc-cross slides Double cross slide in position 7 Loading magazine PRA 52/P type 33 (bar length 3m), year 2004 High-pressure system Knoll SF 2000/Turbo-3 up to 100 bar, year 2004 Tool monitoring Brankamp Air conditioning unit Rittal in the front switch cabinet incl. spare parts package with various collets, cams and various tool holders for longitudinal and cross slides The machine has been run with oil and has processed brass Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2015, Technical details: number of spindles: 6 spindle passage: 22 mm Dksdpfx Asxc Idmoqven ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools! *

Condition: used, Year of construction: 2000, Technical details: Dodpfsyqwvijx Aqvokn number of spindles: 6 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2000 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm pick-up unit, Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *