Used 5 Pzs 625 for sale (60,228)

Year of construction: 2026, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. Nsdpfxoz E Ixte Abysdc With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: excellent (used), mileage: 309,632 km, power: 74 kW (100.61 HP), first registration: 07/2013, fuel type: diesel, fuel: diesel, color: green, gearing type: mechanical, emission class: euro5, Year of construction: 2013, Despite the care taken in entering the data correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual vehicle. Nedpfx Aez I Tkyebyedc TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = Further information = Engine displacement: 2,198 cc Unladen weight: 1,952 kg Payload: 748 kg GVW: 2,700 kg Technical condition: very good Optical condition: very good Please contact Thierry Leemans for further information.

Condition: used, mileage: 480,115 km, power: 185 kW (251.53 HP), first registration: 01/2010, fuel type: diesel, number of seats: 41, gearing type: mechanical, emission class: euro5, color: white, brakes: retarder, Year of construction: 2010, Equipment: ABS, parking heater,

Condition: used, Year of construction: 2005, Fritz Werner TC630-N CNC 5-axis (3 + 2) horizontal machining centre with Siemens 840D control Njdpfsz Hzwrsx Abyjdc with Knoll coolant through spindle system, Knoll chip conveyor, Renishaw probe interface, mist extraction unit, chiller, handwheel & manuals Rohm Power Chuck & Rohm Collet System On Rotary Table. Axis Travel 'X'=1,000mm, 'Y'=820mm, 'Z'=400mm, 'C'=360°, 'B'=360°. Maximum Spindle Speed 6,000rpm. Spindle Taper SK50. 50 Position ATC.

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve Ndodpez Imiijfx Abyjc -Adapter sleeve: Morse taper sleeve MK6 -Type: Reducing sleeve MK6/5 -Dimensions: Ø 64/220 mm -Number: 6x Morse taper sleeves available Price: per piece -Weight: 2.5 kg/pc.

Condition: new, NEW ! Nedpfx Ajz Ep Atobyedc all stainless steel suitable for eurobins of 200L discharging height : ± 1.150 mm 0,37 kW can be operated from both sides mobile loading : max. 350 kg dimensions (l x w x h) : ± 1.020 x 1.250 x 1.150 mm

Condition: good (used), adjustable gear motor, variable speed gear motor, electric motor -Engine power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Shaft diameter: Ø 14 mm -Design: B5 -Number: 1 motors available -Price: per piece Nsdpfx Aec Nlynjbysdc -Dimensions: 410/187/H200 mm -Weight: 20 kg

Condition: new, Year of construction: 2025, Cartridges: 5 cartridge height [inch]: 30 cartridge type: code 7 Ndjdpfoz R Df Iex Abyoc

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ndjdpoy D Abfsfx Abyec Ram adjustability: 25 mm Weight: approx. 500 kg Accessories / Special features: • Adjustable table • Foot release Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, functionality: fully functional, machine/vehicle number: 823xxxxx, Year of construction: 2000, operating hours: 6,952 h, load capacity: 1,600 kg, lifting height: 5,000 mm, free lift: 1,556 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, fork length: 800 mm, empty load weight: 3,368 kg, total length: 1,802 mm, drive type: Elektro, construction width: 1,238 mm, Reach truck Nsdjwhtchspfx Abyjdc Chassis number: 823xxxxx Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Impulse Condition: Ready for operation and fully functional Technical condition: normal Front tire type: Polyurethane Front tire size: Load roller, polyurethane Rear tire type: Polyurethane Rear tire size: Drive wheel, polyurethane Battery voltage: 48V Battery Ah: 560Ah Battery manufacturer: VHB/Jungheinrich Battery type: PzS Battery year of manufacture: 2000 Description: The unit is operational but is sold as is, as returned by the customer, without any warranty or guarantee. The forklift has NOT been repaired or refurbished and has also not been inspected according to UVV regulations, and may therefore have defects. WITHOUT charger. The sale is actually intended for dealers. In the event of a purchase, you accept the above conditions. Side shifter, 3rd valve, impulse control, full free lift, 800 mm forks, joystick, electric steering, fabric seat (glued seat surface), battery with Aquamatik (year of manufacture 2000, condition poor), WITHOUT charger! The unit is operational but is sold as is, as returned by the customer, without any warranty or guarantee, NOT refurbished and not currently UVV-approved.

Condition: used, mileage: 68,142 km, power: 78 kW (106.05 HP), first registration: 05/2013, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 10/2027, fuel: diesel, fuel consumption (urban): 8.9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,849 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2013, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles - Special vehicles - Vehicle fleets Very large selection of Iveco Daily, Volkswagen Caddy, and Volkswagen T5 vehicles from Deutsche Post. Other services: - Various loading options - Registration service - Delivery available throughout Germany for an additional charge Nedpfjz S Rkgex Abysdc Inspections possible without appointment: Mon. – Fri.: 08:00 to 17:00 Sat.: 09:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: E-Mail: Further information available at We speak German / English / Russian / Italian / French / Spanish More Information Sales to businesses only (agriculture, freelancers, small or large enterprises) or export. Subject to errors and prior sale. CoC available.

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 15,719,744 pages Condition: Ndedpfx Aey Dfclsbysc This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm Ndsdpeu Idbysfx Abyjc y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: reconditioned (used), Year of construction: 2006, turning diameter over cross slide: 700 mm, turning length: 3,000 mm, turning diameter: 1,000 mm, spindle bore: 104 mm, total height: 2,600 mm, total length: 7,800 mm, total width: 2,300 mm, overall weight: 14,000 kg, Swing over bed Ø: 1000mm Swing over cross slide Ø:700mm DBC Turning Length: 3000mm Spindle bore: 104mm Bed width: 900mm Nedpfjz R Nrbex Abyjdc Tailstock spindle Ø: mk5Ø Stroke pinole: 300mm Workpiece weight: 4800 Power: 35A Speeds / ranges: 1600Rpm Length: 7800mm Width: 2300mm Height: 2600mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Heraeus Vötsch Type: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 7.5 K/min Temperature change rate (heating): 7.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10.5 kW, Rated current: 22 A Fuse (customer-side): 32 A, time-delay Sound level at 1m distance (free-field measurement): < 69dB (A) Side access: 50 cm / 125 cm Chamber is water-cooled Refrigerant: R 404A and R 23 Weight: approx. 460 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Ndodpezdtdhjfx Abyec We will gladly answer any further questions you may have by phone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Testing Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R 452A and R 23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: Nedpfx Aszd R Tgobyodc The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with refrigerants that comply with legal requirements 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 2001, functionality: fully functional, FMB MBZ 75 - 80, 5-axis FMB multi-machining center, Type MBZ - 2 / 72-80 / 5, Year of manufacture 2001, PC control with TFT color display, Travel range X/Y/Z 7000/1000/370 mm, Milling head with high-frequency spindle for aluminum, Spindle speed up to 18,000 rpm - 7.5 KW, Tool changer, 12-position, Tool holder HSK 40, 2-axis NC dovetail milling head, 8 pneumatic clamping elements, Swivel machining possible, Program generator, FMB programming software, Pneumatic material stop, Measuring / probing device. Ndjdpfx Abozhuitjysc

Condition: used, Weiss   Type: WK3 600/0-M   Weiss Climate Test Chamber, Water-Cooled Type series WK3-../0 with SIMPAC* control system   Test chamber volume: approx. 600 liters   Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm   Data for operation:   Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Fuse (on customer's side): 16 A, slow-blow Protection class, control cabinet and operating panel: IP 54 Max. heat dissipation to environment: 1200 W   Sound pressure level approx. Nedpfxsziywro Abyodc measured at a distance of 1 m from the front, 1.6 m high: 46 dB(A)   Data for temperature tests: Temperature range: -5°C to +90°C   Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1 K   Temperature gradient (according to IEC 60068-3-5) Temperature change rate Heating: 0.6 K/min Cooling: 0.3 K/min   Heat compensation at +20 °C to +50 °C: 200 W   Data for climate tests:   Temperature range: +10°C to +90°C Dew point range: 4 to +89.5 °C Humidity range: 10 to 98 % RH Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.3 K Temperature deviation spatially: ± 0.5 to ± 1 K Humidity deviation over time: +1 to +3 % RH   Refrigerant: R-404A   Weight: 610 kg   For your security as a buyer, please note the following information!   The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers will be subjected to a test run, which will be monitored with calibrated equipment.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber, Water-Cooled The Weiss climate chamber WK11-600/70/5, with an approximate usable volume of 600 liters, is suitable for temperature and humidity testing as well as for conditioning samples and materials in the range of -70 °C to +180 °C. Simcon/32 - Net Controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door closure: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door closure: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Connections: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Data for temperature tests: Temperature range -70 °C to 180 °C Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviations: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Thermal compensation: at +20 °C: 5000 W Ndedpfszimg Hsx Abyjc at -20 °C: 5000 W Data for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 % RH Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviations: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Thermal compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Fuse on customer side: 32 A slow-blow Permissible weight of test specimen: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 50977, travel distance X-axis: 5,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 90,000 m/min, feed rate Y-axis: 90,000 m/min, total length: 9,600 mm, total width: 6,500 mm, spindle speed (max.): 16,000 rpm, total height: 5,600 mm, table load: 20,000 kg, torque: 160 Nm, rotational speed (max.): 16,000 rpm, overall weight: 63,000 kg, warranty duration: 18 months, State-of-the-art linear motor milling machine in a compact GANTRY design with 5 CNC-controlled simultaneous axes, particularly suitable for efficient 5-sided machining of workpieces made of synthetic and composite materials, model-building block material, and aluminum, as well as for HSC machining of cast and steel materials. Travel ranges: X = 5,500 mm x Y = 3,500 mm x Z = 1,500 mm Swivel milling head 15 with CNC-controlled A and C axes High-frequency milling spindle, HSK100A, 60 kW, 16,000 rpm, 160 Nm CNC control HEIDENHAIN TNC 7 Ndsdpfx Absz I Rlzeyoc 80-position tool changer, chain magazine KSS and MMS Laser tool measuring system Wireless measuring probe RMP60 Bellows cover Equipment and further options available upon request. Available from August 2027!

Condition: new, fuel type: diesel, power: 264 kW (358.94 HP), motor manufacturer: Perkins 1506A-E88TAG5, General information Njdpswaqw Hofx Abyedc Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 2.261 kg Functional Generator capacity: 330 kVA Dimensions of cargo space: 279 x 107 x 182 cm CE mark: yes Other information Fuel consumption: 46,5 L/Hour at 75% Load Prime Generator: FG Wilson FG26A250 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 528 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: used, Year of construction: 2017 Ndedpfjzb Nahjx Abyec Operating hours: 8.000

Condition: new, machine/vehicle number: FGWPEP75TDM801889, fuel type: diesel, motor manufacturer: Perkins 1106A-70TG1, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 2.100 kg Functional Generator capacity: 150 kVA Dimensions of cargo space: 352 x 112 x 198 cm CE mark: yes Other information Fuel consumption: 22.6 L/Hour at 75% Load Prime Generator: LL3114H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 289 l Additional information Ndsdpjx Svifofx Abyjc Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: used, Vötsch Type: VTS 7011-5 Heraeus Vötsch temperature control chamber, water-cooled Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.3 to 1 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate (cooling): 6 K/min Temperature change rate (heating): 10 K/min Refrigerant: R-404A / R 23 Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 7.5 kW Rated current: 13 A Weight: 360 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone. Nedezg Tpcepfx Abysdc

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Ndedpfx Aezg Tpiebyec Refrigerant: R-404A and R23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.