Used 4 Side Planer for sale (29,522)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Itsdpefdkb Ujfx Aacen - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2020, 1. WEISCHAUPT WM-G10/4-A (with gas line) - Power: 100-1100 kW - Model: ZM-LN - Year of manufacture: 2020 2. WEISCHAUPT WM-G10/3-A (with gas line) - Power: 100-1000 kW Ijdpfx Aewgyrteacstn - Model: ZM - Year of manufacture: 2013

Condition: good (used), For sale: individual pieces of original deep hole drilling bits by Botek (Germany) – a renowned manufacturer of precision tools for metalworking. Single-lip drills (single-edge) with internal cooling, made from K15B carbide – very hard and wear-resistant. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B carbide (ultrafine grain) • For steel, stainless steel, aluminum, bronze, and engineering plastics The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulic industries, and toolmaking. Isdpfx Aaowg R I Eocotn Condition: New and used (pre-owned), but in good technical condition. Some items may require resharpening – an ideal base for professionals. //// PRICE SHOWN IS PER PIECE ////

Condition: excellent (used), Masini de rectificat centerless . Diferite dimensiuni si marci . Lichidare stoc . Masina de rectificat bed 5 . Piatra conducatoare de 250 mm . Alimentator automat . Pret 6000 euro . Masina de rectificat bed 4 alimentator automat , pret 5500 euro . Iedpfow U N Avsx Aacetn Masina de rectificat heminhausen Sr 4 . Piatra conducatoare de 250 mm , alimentator automat . pret 5500 euro .

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type Ijdpocw Dg Defx Aacjtn negotiated Description Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, shelf length: 8,500 mm, frame height: 3,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 4, pallet spaces: 108 euro pallets, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws Itodpfx Aev Ukz Aeacjn - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm Ijdpfefdkbhox Aacotn - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2021, operating hours: 121 h, functionality: fully functional, machine/vehicle number: 320.04.001.21, travel distance X-axis: 5,230 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece height (max.): 105 mm, overall weight: 4,100 kg, FOR SALE: FELDER FORMAT 4 CNC + FELDER RL 350 extraction system including piping and tools (milling cutters) FELDER FORMAT 4 • Type: Profit H10 22 43 c-tech Isdpfjwc R D Ejx Aacetn • Serial number: 320.04.001.21 • Year of manufacture: 2021 • Operating hours: 121 hours • Safety system with safety mats • Mobile control panel with screen, keyboard, and mouse • 2 vacuum pumps as standard, each with a nominal capacity of 250 m³ + a special version with a third extraction pump to ensure maximum cleanliness during milling • 8-position tool changer FELDER RL 350 extraction system including piping • 3 x 400V 50Hz 15HP 11kW • Maximum flow rate: 8000 m³/h • Nominal flow rate: 20 m/sec, 6920 m³/h • Negative pressure: 2630 Pa • Filter area: 71 m² • Extraction connection diameter: 350 mm • Residual dust content:

Condition: used, Capacity: 80 m/min Planer feed table, tested. At speeds up to 80 m/min. Itodeg S Dm Nepfx Aacon

Condition: ready for operation (used), functionality: fully functional, 4 printing units 12 " Iodpowhqnzefx Aacstn water cooling unit 2 perforated units It is in good condition in production

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Iodpfx Aasi Apuhscotn Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: used, Year of construction: 2011, Technical details: Rated capacity: 63 kVA Revolution per minute: 1500 U / min capacity: 50 (Wärmetauscher) KW type of fuel: (Erd) Gas Itodsu Nvp Sepfx Aacjn Number of working hours: 87021 h weight: ca. 2300 kg dimensions L x W x H: ca. 3,0 x 1,0 x 1,8 m CHP compact module (heat exchanger module) soundproofed with electric cabinet Engine: MAN; type E0834 E302; Gas-Otto 4-stroke engine, 1500 rpm; power mech. 54kW, ignition control unit Motortech MIC 500 (MIC 520) Generator: Leroy Somer; type LSA 43.2 8; type output 87 kVA; 1500 rpm; voltage 400V Heat exchanger module: Heattransfer, engine cooling water output 46kW; exhaust gas heat output 33kW; total heat output via plate heat exchanger = 79kW Connections for gas inlet, flue gas outlet, condensate drain and heating water on the side. with exhaust gas top *

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Iedpfxed Tbbde Aacetn - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) Itjdpfxsguk Dko Aacjn - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Iodpfx Aasguk Dvocjtn The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) Ijdpfx Asguk A Hoacetn - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: excellent (used), Type: ClimeEvent C/2700/70/4/W Weiss Technik ClimeEvent C/2700/70/4/W – High-Performance Climate Test Chamber For sale is a ClimeEvent C/2700/70/4/W climate test chamber, ideal for industrial, research, and development applications. Perfect for demanding temperature and climate testing of large components and assemblies. Technical specifications: - Internal dimensions (H x W x D): 1150 × 1990 × 1200 mm - External dimensions (H x W x D): 2250 × 3800 × 1555 mm - Test chamber volume: approx. 2760 l - Temperature range: –72 °C to +180 °C - Temperature change rate: 4 K/min (heating & cooling) - Temperature uniformity: ±1.0 K to ±1.5 K - Humidity range: 10% – 98% r.h., deviation ±1% – ±3% r.h. - Power consumption: 8000 W (heating/cooling) - Power supply: 500 V - Refrigerant: Eco-friendly R449A/R469A - Air management: Optimized supply and exhaust air regulation - ESD protection: Fully integrated - Software: Compatible with S!MPATI® for test control and documentation Electrical connection: - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 33.0 kW - Rated current: 18.5 A - Test chamber volume: approx. 2760 liters - Weight: approx. 2000 kg For your safety as a buyer, please note the following! The following procedures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certification 4. After a successful check, the chambers undergo a documented test run. Itsdpfexpg U Rex Aacsn Condition: used Scope of delivery: (See picture) (Specifications and details subject to change or error!) Further questions can be gladly answered by phone.

Condition: good (used), mileage: 268,449 km, power: 309 kW (420.12 HP), first registration: 02/2018, fuel type: diesel, color: white, axle configuration: 8x2, tire size: 315/80R22,5, fuel: diesel, wheelbase: 5,900 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, loading space width: 2,480 mm, loading space length: 7,220 mm, loading space height: 760 mm, Year of construction: 2018, Equipment: ABS, air conditioning, crane, cruise control, traction control, - Digital tachograph - Electric windows - Electric mirrors - Tachograph (control device) - Short cab - PTO (power take-off) - Pump - Central locking Number of axles: 4, Configuration: 8x2, Unladen weight: 16,525 kg, Gross weight: 35,000 kg, Total tank capacity: 400 liters, Number of diff locks: 1, Suspension type: air suspension, Cab type: short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/Cassette, Color: white, Heated mirrors, Rear-view camera, Lighting system: halogen lamps, Speed limiter, Climate control, Bluetooth, Warning lights, Engine power: 309 kW (414 HP), Fuel: diesel, Euro: 6, Transmission type: AS-Tronic, Transmission make: ZF, Speed limiter, Number of gears: 12, Power steering, ABS, ASR, PTO (power take-off), Number of PTO outputs: 1, Starter battery, Pump, Central locking, Seating configuration: 1+1, Seat material: fabric, Seat adjustment: manual, Crane, Crane make: Hiab, Crane year: 2017, Crane lifting capacity: 22,000, Maximum load: 980 kg at 14.7 m, Number of stabilizers: 2, CE certified, Control position: right side operation, Remote control, Crane position: rear-mounted, Extendable: 5x, Hydraulic auxiliary connections: none, Rotator, Pallet hook, HIAB 228ES5 Transmission Transmission: ZF, 12 gears, automatic Axle configuration Tyre size: 315/80R22.5 Brakes: disc brakes Itodpfeww T Amjx Aacjn Axle 1: steered; left tyre tread: 3 mm; right tyre tread: 2 mm; suspension: leaf spring Axle 2: steered; left tyre tread: 5 mm; right tyre tread: 8 mm; suspension: leaf spring Axle 3: twin tyres; left inner tread: 12 mm; left outer tread: 8 mm; right inner tread: 9 mm; right outer tread: 10 mm; suspension: air suspension Axle 4: lift axle; steered; left tyre tread: 8 mm; right tyre tread: 8 mm; suspension: air suspension Dimensions Dimensions (L x W x H): 1200 x 255 x 367 cm Weights Unladen weight: 16,525 kg Payload: 18,475 kg Gross vehicle weight: 35,000 kg Functional Crane: Hiab, year of manufacture 2017, mounted at rear of chassis Platform height: 134 cm Pump: Yes Maintenance APK (roadworthiness inspection): valid until 01.2026 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial Information Leasing price: €994 per month (default, 72 months); Please ask for further information and terms Identification Registration: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European makes, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-moving stock • Recognizable quality • Good pricing • Reliable trading • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration swiftly processed • Qualified technical services • The security of 'recognizable quality' • And more.... Please visit our website for...

Condition: used, Year of construction: 1994, total width: 1,200 mm, total length: 4,700 mm, total height: 1,600 mm, Weight: 672 kg Itodpfxsxbf E Ss Aacsn - Main motor power [kW]: 4.5 - Max. cutting length [mm]: 4040 - Max. cutting height [mm]: 150 - Max. saw blade diameter [mm]: 400 - Arbor saw blade diameter [mm]: 32 - Year: 1994 - Documentation available: No - CE marking present: Yes - Serial number: 228822 - Voltage [V]: 380 - Power [kW]: 11.2 - Transport dimensions: 4700mm x 1200mm x 1600mm (l x w x h) - Transport weight [kg]: 672kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Used LABOR-PILOT 2000/4 type in stainless steel-NR 03-4470H-Manufactured in 2003-With LABOR PILOT CONTROLLER-3 x 380 Volts-On mobile frame Itjdpfx Aaoxlgkwscon

Year of construction: 1984, condition: good (used), burnt hydraulic guillotine shear, make LVD, type MVN 25 / 4, year 1984 power 2500 x 4 mm with backgauge Itsdpfsihppxjx Aacon with documentation Other accessories: - Conveyor table - Lifting table

Condition: used, Year of construction: 2004, Power: 1 kW (1 HP) Manufacturer : Nova (SERAC) Model: NS 574/4 Year : 2004 Itedpfx Asvly Tcoacon Type : volumetric filling by 2 pistons Number of heads: 4 Volume : 500 to 7400 ml Volume per mm of stroke: 18.14 ml Product: liquid / semi-liquid for flasks, bottles, cans External conveyor control Neck detection Available filling formats Filling heads available Recovery tank Drain hoses installed on photos. Power: 0.45 KW Air consumption: 140 Nm3/H at 6 bars

Condition: excellent (used), Year of construction: 2001, Langzauner edge sander EK 3/4 top condition Ijdpfx Aasvr Hw Iscetn Accessories: some abrasives still available Veneer stop jaws Table width: 350 mm Table length: 1,000 mm Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Belt speed: 22 m/s Main motor: 2.2 kW Motorized feed Veneer sanding Circular sanding support Oscillation Height adjustment: table, manual Sanding belt pivotable: Yes Conformity marking: CE mark Total connection: 4.6 kW Space required: Length: 1.7 m Width: 0.85 m Height: 0.9 m Location: from stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2018, operating hours: 6,320 h, 4+1 bucket approx. 0.8 m³, hydraulic quick-coupler system, pallet forks. The vehicle may be wrapped and/or labeled with advertising. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide you with a quote from our partner workshops! The vehicle may be wrapped and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us! Itsdpfjxb Iuiex Aacen

Condition: excellent (used), V. Bandsaw, manufactured by Elektra Beckum, type BAS 315/4 Itsdpfxovbf Svo Aacjn Year of manufacture: 1994 throat 315 mm Saw blade length: 2240mm Voltage: 220V Cutting depth: 170mm Accessories: Saw bands, length stop, angle adjustment for miter cuts