Flame cutting system
Microstep MasterCut-AM 9001.20

Name: Microstep MasterCut-AM 9001.20
Brand: Microstep
Availability: InStock

Year of construction

2011

Condition

Used

Location

Germany

Flame cutting system Microstep MasterCut-AM 9001.20

Show map

Machine data

Machine type:: Flame cutting system

Manufacturer:: Microstep

Model:: MasterCut-AM 9001.20

Year of construction:: 2011

Condition:: good (used)

Price & Location

Location:: Deutschland

Call

Details about the offer

Listing ID:: A16887701

Reference number:: F1981

Update:: 10.12.2025

Description

CNC Gantry Flame Cutting Machine
Manufacturer: Microstep
Model: MasterCut-AM 9001.20
Year of manufacture: 2011
CNC Control: iMSNC with integrated network card

Working area: 2,000 x 9,000 mm

Exhaust table
1 oxy-fuel torch
Cutting thickness up to 150 mm
1 plasma marking unit Kjellberg
Laser pointer

Detailed technical data:

1x oxy-fuel torch (fully automatic)
1x plasma marking unit (fully automatic) Kjellberg Finsterwalde

MicroStep® CNC machine controller iMSNC with integrated network card
LCD operator panels on the gantry
Laser pointer with automatic offset transmission
iMSNC control parameter database / Windows®
Programming system "AsperWin-Basic" for programming directly on the machine control
Module macro library "AsperWin Select"
NC simulator module "AsperWin NC-Sim"
Module "Plasma Marking" (for scribing) via the plasma source
Module "THC" / Automatic height control via arc voltage
USB 2.0 interface for storage media
Remote diagnostics module MicroStep® "iFDS Win"
Remote maintenance access via TeamViewer

Central gas control via proportional valves
Parameter database for 1 torch
Energy supply cables
Gas hoses for heating oxygen, cutting oxygen
Acetylene machine cutting torch RHÖNA-Acetylen FIT+

1 capacitive height control IHT / for oxy-fuel
1 electric ignition unit RHÖNA-Acetylen

Double-sided cable protection (collision prevention) of the gantry bridge with emergency stop

Kjellberg® plasma marking unit FineMarker
Fully automatic support for FineMarker
Ljdpjudn Rzofx Aa Ejta
Kjellberg® plasma marking system FineMarker
CNC interface for FineMarker / integrated into the CNC control
Module for automatic control of the marking device
101225ä

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2003

136 listings online

Call

Send inquiry

Telephone & Fax

+49 7022 ... show

Fax:

These listings may also fit your interest.

Listing

Plate Bending Machine - 4 Rolls SAHINLER SHV 4R OHS 2070 x 320

Niederlangen

1,037 km

Plate Bending Machine - 4 Rolls
SAHINLERSHV 4R OHS 2070 x 320

Call

Condition: used, Year of construction: 2017, sheet width 2070 mm plate thickness 25 mm pre-bending 18 diameter of upper rolls 320 mm side roll diameter 260 mm diameter of lower rolls 320 mm 26 kW 8100 kg Ltsdpfx Aaowc D Dxo Eea 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark

See details

Listing

Wellingborough

521 km

CNC ROBOTIC COPING LINE
VOORTMANV808

Call

Listing

FIBER LASER Durma HD-F(L) 3015 lll 15 kW

Saerbeck

1,076 km

FIBER LASER
DurmaHD-F(L) 3015 lll 15 kW

Call

Condition: new, 2021 Durma 15 kW Fiber Laser Ledpfjgk Nlpex Aa Esta Make: DURMA Type: HD-F(L) 3015 Working range X-Y-Z: 3060x1530x160 mm Laser power: 15000 Watt IPG Control: Siemens Sinumerik 840D sheet thickness mild steel: 40 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 30 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Speeds X-Y axes simultaneous: 280 m/min. positioning accuracy: +/- 0,05 mm Repeating accuracy: +/- 0,05 mm Installation area L/W/H: approx. 14500x7500x2420 mm weight: approx. 12000 kg Standard equipment Automatic pallet changer Control Sinumerik 840D Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber exhaust system Special laser cutting options Remote maintenance CE marking IPG fiber laser source 15000 Watt including cooler Extended equipment possible: Filter, compact dust collector Vanterm Motorized chip conveyor for small parts/waste Laser Service Set Cloud License Lantek Expert Inside Software Lantek software with positioning - laser diode with automatic sheet metal position detection, measurement Camera Inside Linear drive We will be pleased to send you further information on request.

See details

Listing

Band Saw - Automatic - Horizontal BERG & SCHMID SBS 550 VA-I / CNC

Germany

1,293 km

Band Saw - Automatic - Horizontal
BERG & SCHMIDSBS 550 VA-I / CNC

Call

Condition: new, 550 mm 550 mm 550 x 550 mm saw band length 5980 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,8 t dimensions 3,0 x 2,15 x 2,2 m Ltedpfsfg E Hwjx Aa Eja PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. Modern SNC 20 control for CNC version Frequency-controlled saw drive Control buttons with pictograms Work light Powered chip brush Hydraulic belt tension Clamping pressure regulation Double vice (before and after the belt) Creep path for positioning Bundle tension prepared electrically and hydraulically Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

See details

Listing

VERTICAL CAROUSEL LTG-TOWERMAX P 19.0-350-267-8700

Nauen

1,406 km

VERTICAL CAROUSEL
LTG-TOWERMAX P 19.0-350-267-8700

Call

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally Ltjdpfod Spf Rsx Aa Eea External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

See details

Listing

Köln

1,072 km

Brennbohranlage
FicepTipo G31 LG

Call

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-230047, The FICEP Tipo G31 sheet metal processing center for the economical processing of sheet steel and flat steel in steel construction and the steel trade. The Ficep Tipo G31 LG can drill, center punch, thread, countersink, mark, mill, oxy-fuel cut and plasma cut flat steel or sheet metal with a maximum sheet width of 3,100 mm and a sheet length of 14,000 mm in a single system. Ledpfx Aerr Sqlea Ejta The CNC-controlled sheet metal processing center is equipped with two 26 kW drilling units. 2 tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changes. The system is suitable for sheet sizes: Sheet width: minimum 200 mm, maximum 3100 mm; sheet length: minimum 2500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma source is available for plasma cutting. The system also has an oxyfuel cutting unit for thick material thicknesses. The drilling unit with a high torque and a spindle speed of up to 6,000 rpm is designed for drilling with carbide tools such as solid carbide drills, Nenok Multiplex interchangeable insert tools as well as for use with HSS coolant channel drills with a drilling diameter of 10 mm to 40 mm. The Ficep Tipo G31 machine is in very good condition and has only a few operating hours.

See details

Listing

All terrain crane Effer 955/8S Volvo 540 Euro 6, Valid Inspection, 8x2x4 D

Groenlo

1,011 km

All terrain crane
Effer955/8S Volvo 540 Euro 6, Valid Inspection, 8x2x4 D

Call

Condition: used, mileage: 129,252 km, lifting height: 38,000 mm, Year of construction: 2015, Drivetrain Drive: Wheel Ltodpfx Aaew A Hcdj Eea Weights Empty weight: 27.875 kg Functional Lifting capacity: 23.800 kg Identification Serial number: 122024 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 11.1x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information

See details

Listing

Jüterbog

1,442 km

Pick & Carry Crane
JMGMC 180 s

Call

Condition: used, functionality: fully functional, load capacity: 18,000 kg, lifting height: 11,900 mm, fuel type: electric, mast type: telescopic, construction height: 1,990 mm, empty load weight: 21,650 kg, total length: 5,540 mm, drive type: Elektro, construction width: 2,000 mm, Pick & Carry Crane Lsdpfxet Dd Uwe Aa Ejta Mast type: Telescopic Technical condition: good Front tires type: Non Marking Rear tires Type: Non Marking Remote control

See details

Listing

Mandrel tube bending machine Transfluid DB 2090 DB CNC

Thurgoona

17,313 km

Mandrel tube bending machine
TransfluidDB 2090 DB CNC

US$18,999

EXW ONO plus VAT

Call

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Ltodpfxstrd T To Aa Eja Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

See details

Listing

Aalen-Ebnat

1,382 km

Band Saw - Automatic
JAESPACompact 4S

Call

Year of construction: 2013, condition: used, cutting diameter 420 mm saw band length 41 x 5600 mm cutting width 1,3 mm Control Simatic S7 Touch band speed 17 - 110 m/min sawing motor 7,5 kW diameter of round bars 420 x 3000 mm diameter of round bars 300 x 6000 mm total power requirement 30 kW weight of the machine ca. 18,5 t Ledpfx Ajd Izmaja Esta dimensions of the machine ca. 12,5 x 5,0 x 2,5 m CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good as new condition, approx. 1,000 working hours.

See details

Advertise here