Press Brake Darley 3.100 mm x 110 Ton

Darley EHP 110 31/25

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 17,446 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: DELEM, controller model: DA65, bending force (max.): 110 t, working width: 3,100 mm, number of axes: 8, oil tank capacity: 130 l, overall weight: 8,900 kg, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, power: 11 kW (14.96 HP), input voltage: 400 V, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. In February 2024, the upper WILA tool clamping system was serviced. The machine has very few operating hours. Hydraulics: Hoerbiger Machine number: 122067 Iedpfsx N Ibhex Ag Uotb Machine type: EHP-L 110 31/25 Year of construction: 2000 Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Weight: 8,900 kg Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation If you have any questions or would like more information, please send us a message or contact us by phone.

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis. Ijdpjvxipgefx Ag Ustb

Condition: like new (used), Year of construction: 2003, functionality: fully functional, total length: 52,000 mm, total width: 24,000 mm, total height: 10,500 mm, input voltage: 400 V, working height: 1,050 mm, overall weight: 2,000 kg, compressed air connection: 6 bar, drill diameter: 180 mm, air pressure: 6 bar, input frequency: 50 Hz, type of input current: AC, power: 2.5 kW (3.40 HP), 8 Sep | Drilling machines METRAL double head drilling machine TD3-2000, year 2003, complete overhauled 2023 Technical data: glass thickness 2-50 mm bore diameter 3-180 mm Itodpfxjrg E Hcj Ag Ujb weight without roller table: 775 kg power supply: 2,5 kW measurements without roller table: 1,3 x 1,7 x 1,2 m measurement roller table: 5,2 x 2,4 m/ height 1050 mm/+-25 mm maximum measurement machine frame to drilling center:

Year of construction: 1992, condition: excellent (used), Used 700ton H-frame hydraulic press for sale Make: Muller Capacity (ton) : 700 Number of pistons : 2 Table dimensions ( x-y/mm) : 4000×2200 Slide dimensions ( x-y/mm) : 4000×2200 Iodpfx Agohcfzkj Uotb Stroke ( mm) : 1400 Light at tdc ( mm) : 1920 Cushion power ( ton ) : 400 Cushion stroke (mm) : 500

Condition: as good as new (ex-display), Year of construction: 2023, The ENR series are air-cooled chillers for industrial use for outdoor installation. The ENR 038 has axial fans, scroll compressors, condensers with finned aluminum fins and self-cleaning coaxial evaporator for maximum reliability. Internal pump, tank, fan control, low GWP refrigerant R454B. Refrigerating capacity 37 Kw, envious GWP refrigerant R454B Isdpfsfmd Hhjx Ag Uotb We have a lot of chillers directly from stock available used and new . contact us for a no obligation quote. We rent / sell / and also take over the service for all refrigeration systems Germany-wide.

Condition: used, bending length: 3100pressure: 80motor power: 5,5oil filling: 100 Iodpfxoru Unbs Ag Uotb

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Iodpfswq Dpqex Ag Ujtb Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: excellent (used), Control : D.Electron Z 32 centre height 220 mm Itodpod Sitkefx Ag Ujb Centre distance 1000 mm turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm spindle mounting CL 6" spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4

Condition: ready for operation (used), machine/vehicle number: 64532, used hand hydraulic tube bending machine existing bending segments: 3/8, 3/4, 1 1/4 u. 2" Itjdpfodzw Hwsx Ag Uob space requirement: 850 x 640 x 780 mm

Condition: good (used), Year of construction: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control system: Fanuc Series 31i-MODEL A5 Iedpsxflxajfx Ag Uotb Spindle speed: up to 10,000 rpm Travel paths X-axis: 300 mm Travel paths Y-axis: 300 + 100 mm Travel paths Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Admissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): CNC Machining Center Fanuc Robodrill α-T21iFa Coolant pump and chip tray Exact scope of delivery as per photo series The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel paths of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, the machine offers versatile machining capabilities. The 21-position tool changer ensures flexible production processes and minimizes setup times. The spindle achieves speeds of up to 10,000 rpm, enabling both fine machining and powerful cutting operations to be performed efficiently. The Fanuc Series 31i-Model A5 control system provides user-friendly and reliable programming. With a maximum workpiece load capacity of 200 kg and a compact construction, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness, or currency of the information provided.