Used Dvpn 75 for sale (21,677)

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - Infeed width: 740mm - Infeed height: 300mm - Shaft width: 780mm - Shaft diameter: 1000mm - Knife length: 780mm - Number of knives: 2 pcs - Screen dimensions: 55x55mm - Bottom: 4 toothed feed rollers - Lower shaft motor: 5.5kW - Top: 3 toothed feed rollers - Upper shaft motor: 5.5kW - Belt conveyor feeder - Length of belt feeder: 4300mm - Width of belt feeder: 600mm - Feeder belt drive motor: 2.2kW - Main motor: 90kW - Reverse - Autoreverse - Overall machine dimensions (L/W/H): 4600x2350x1700mm - Overall feeder dimensions (L/W/H): 4550x980x970mm - Total weight: approx. 11,000kg – German-made – Autoreverse (adjustable) Hfedpema Hv Dofx Ah Hjp – Used shredder, in very good condition Net price: 265,900 PLN Net price: 63,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major currency fluctuations, the price may change)

Condition: good (used), In this offer you buy a used cutting plotter "Mimaki CJV150-75" Item for sale: 1 x Mimaki CJV150-75 with the following equipment: incl. 8 ink colour printing system incl. special colours: orange, white and light black - Print head must be replaced Condition: Hjdpfx Ashg Amajh Hsfp This is a used machine and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been tested for function A test printout can be seen in the photo. For more information you can of course contact us personally. Shipping is possible on request!

Condition: good (used), Year of construction: 1994, functionality: fully functional, Electromagnetic belt separator Steinert Hfedpfjvyuy Hsx Ah Hsp length: 1500mm width: 900mm Year of manufacture: 1994 Protection class of magnetic housing IP44 Magnet power 2,2 kW; Material flow rate 1.8 m/s; Drive power 2,2 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Year of construction: 2001, condition: good (used), 2 pieces axially split volute casing pumps with motor and base plate. Last application as turbine. !!! Map as pump and as turbine as pictures !!! Manufacturer: KSB Type: Omega 350-360 A Delivery rate: 1728 m³/h Delivery head: 32 m Speed: 1450 rpm Year of construction: 2001 For turbine operation Engine: VEM G21R 280 S4 Capacity: 75 kW at approx. 20 metres head and 1600m³/h Voltage: 400 V For pump operation: required shaft power: 177 kW required electric motor: 200 kW NPSH Value: 6.9 Efficiency: 85.28%. maximum operating temperature: 140°C Speed sensor: Yes !! Price per piece !! Hfedod Nqi Rjpfx Ah Hsp

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Hsdpfxjua Eu Nj Ah Hjfp Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h

Condition: excellent (used), RS simulators Here we offer a temperature test cabinet. Temperature test chamber water cooled Temperature range: -70°C to +180°C Time deviation: ±1 K according to DIN 50011 with empty test chamber Average heating time: approx. 3 K/min 8acc. to DIN 50011 part 12) Average cooling time: approx. 3 K/min 8acc. to DIN 50011 Part 12) Test chamber dimensions: Width 530 mm x height 530 mm x depth 530 mm Outer dimensions: Width approx. 900 mm x Height approx. 1800 mm x Depth approx. 1400 mm Total power: approx. 6 kVA power consumption: 12 A Main fuse: 3 x16 A, slow blow Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 600 kg Type: TS 150/75 Hsdpfxelp Hyto Ah Hofp Refrigerant: R404A / R23 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Year of construction: 2011, operating hours: 3,224 h, machine/vehicle number: 1200024863, fuel type: diesel, Empty weight: 11.516 kg Hjdpjvipvbjfx Ah Hsfp Lifting capacity: 750 kg Working height: 2.230 cm Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Outrigger Transport dimensions (LxWxH): 4.8x2.4x2.96 Please contact PFEIFER GROUP for more information

Condition: good (used), Spindle diameter: 75 mm Machine weight approx. 6500 kg Hfsdpfsxtu D Uox Ah Hsp Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, grinding length 1000 mm grinding width 750 mm Hjdpfx Ahexukqys Hjfp workpiece height 700 mm Control SIEMENS, SIMATIC S 7-1500 table surface area 1050 x 640 mm table height over floor 1000 mm table speeds 3.000 - 30.000 mm/min cross feed of table continual 5 - 5.000 mm/min cross feed of table intermittent 0,1 - 65,0 mm vertical adjustment, 1 graduation 0,002 mm rapid traverse vertical 0,25 m/min grinding spindle speed 50 - 2.500 U/min grinding wheel size ø 400 x 50 x ø 127 mm workpiece weight max. 1.000 kg table load max. 1600 kg total power requirement 33,2 kW weight of the machine ca. 9,3 t dimensions of machine L x W x H 4,50 x 2,37 x 2,65 m - complete electronic / electric renewed in 2018 Accessories: magnetic plate 1000 x 650 mm, grinding wheel with flange, wheel trueing attachment, extraction

Condition: new, sheet thickness: 70bending length: 2100upper roll diameter: 540 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Hfjdpfx Aod Ab N Ssh Hep Options: - variable speed of rotation EURO 6.940,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 19.500,-- - side supports EURO 10.400,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 1500 x 1500 mm, 75 plates, open spout, 30 mm cake thickness, pressure max. 3500 liters, filter surface 270 m², dimensions 8500 x 2200 x 2400 mm, weight 28,000 kg, plate transport, motor hydraulics, drip tray, filtrate, with or without filter cloths Hfsdpfxefbbp Ue Ah Hep

Year of construction: 2012, condition: excellent (used), 12 months warranty, demonstration unit, very good condition, only approx. 250 operating hours, available immediately - Oven according to DIN EN 1539 for solvent-based materials - Max. temperature: 300°C - Oven chamber: 750 x 750 x 750 mm (W x D x H) Hsdpfjiq Uv Nex Ah Hefp - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - Temperature controller: JUMO dTRON 04 - Permissible solvent quantity max. 19.30 g - Heating capacity: max. 21.78 kW, connected load 22.5 kVA, nominal current 32.6 A - Connection: 400V 3L/PE 50Hz - Cable with 63A plug, also suitable for fixed installation, then fused at 35 or 50 A - incl. 1 wire shelf insert - Weight 550 kg - Documentation Inspection possible by appointment at our warehouse. Oven, ovens, industrial oven, circulating air oven, chamber air circulating oven, tempering oven, heat oven, drying oven, curing oven, paint dryer, solvent oven

Year of construction: 2014, condition: excellent (used), Complete Drying System with PLC, Steam Generator, Chiller to dry tea and similar loose materials. All stainless steel construction. Hodpfx Aexvm Sveh Hofp

Condition: used, pressure 75 t stroke 250 mm daylight longitudinal/sideways 800 x 215 mm dayligth 170 - 885 mm working pressure 7,5 - 8.5 bar weight of the machine ca. 0,45 t dimensions 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Cylinder can be moved sideways Hfedpeupxr Usfx Ah Hep pneumatic foot pedal Winch for table height adjustment 2 pcs. pressing blocks CE marking

Condition: used, Year of construction: 2003, Plastic Recycling Mill Hfedpfswav Hmsx Ah Hep Manufacturer: REG-MAC Italy Type: R100/75/V Engine Power: 75 kW Weight: 1850 kg Year of Manufacture: 2003 Technical Condition: Used

Condition: good (used), GCT nitrogen freezing tunnel. 750mm wide, 6m freezing length. Lovely condition, bought new for freezing poultry portions and has been in storage for a long time. Hfsdpfshri N Ijx Ah Hsp

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 122000029, spindle motor power: 7,000 W, 5-AXIS PROFILE MACHINING CENTER ALU | PVC | STEEL Profile Machining Center SBZ 122/75 5-axis version for metal construction customers and industrial users • For efficient and economical machining of aluminum, plastic, and thin-walled steel profiles • All operations such as milling, drilling, and thread cutting are performed with the profile bar stationary to protect the profile surface • Continuously adjustable A-axis positioning from -120° to +120° • Continuously adjustable C-axis positioning from -220° to +220° • All five axes can be run simultaneously via RTCP (Rotation Tool Center Point) • Additional C-axis allows for frontal machining from both the left and right sides • Linear guides for autonomous fixture displacement Hsdpfx Aexrbczeh Hsfp • Work results improved by intelligent control systems • Rapid positioning of the machining unit at up to 120 m/min. enabled by dynamic servo drives • Thread cutting without compensation chuck • The 2-axis unit with A- and C-axis can accommodate a 180 mm diameter saw blade • Automatic clamp detection and positioning • Ergonomic operation thanks to modern slant bed design • Automatic tool changer with twelve tool storage slots (tools not included) • Modern 5-axis CNC control • No homing run required for the main axes due to use of absolute encoder systems • Collision avoidance through automatic clamp detection and positioning • Power-torque milling motor with closed-loop speed control for short spindle acceleration and deceleration times • Certified, drive-integrated safety functions • Low power consumption thanks to intelligent control engineering • Enhanced energy efficiency through DC bus coupling of the axis drives • Uninterruptible power supply (UPS) • Windows operating system • 18.5" panel PC, i5 processor, USB ports and network connectivity • Simple and user-friendly programming via eluCam at the operator terminal, even during operation • Remote maintenance via Internet

Condition: reconditioned (used), Totally renovated Cambio 75 debarker with 5 knives airten rotor and brand new hydraulic dampers Hsdpfx Ahencfrzj Hofp

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block Hfsdpev Ac Ukefx Ah Hep -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/75/H130 mm -Weight: 4.8 kg

Condition: used, LONGITUDINAL SANDER CAMAM MOD. LOL/75/RU - CE RULES - Volt. 380/50 Hfsdswrpzuspfx Ah Hjp

Condition: excellent (used), PJ.187.100 Chiller Unit cpl. for Suprasetter A52/74/75/105 second-hand, tested All offers are subject to prior sale Hfjdegzbwmjpfx Ah Hjp

Condition: used, Description: Temperature test chamber Manufacturer: RS-Simulators / VTS 1200/75/S Hodpfx Ahewp Ip Es Hofp Temperature range: -75 to +180°C External dimensions: 2.30 x 2.30 x 2.80 m (L/W/H) Test chamber dimensions: 1.10 x 1.00 x 1.00 m (L/W/H) Unit: 2.30 x 1.30 x 2.00 (L/W/H) Average heating rate: approx. 5 K/min (from -40 to +150°C) Average cooling rate: approx. 5 K/min (from +150 to -40°C) Current: 38 A Connection voltage: 3 x 400V/NPE 50 Hz Weight: approx. 2700kg Item condition: used item Contact us if you have any questions Shipping: the stated shipping costs apply to deliveries within Germany Worldwide shipping (shipping costs outside Germany on request) Worldwide shipping (please kindly request shipping costs) The given shipping costs apply to shipping within Germany Sale only to commercial customers without warranty or guarantee. Deviations from technical data as well as errors in the description of the items may occur and are reserved.

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punching tool: 2 columns -Punching dimensions: see photo -Dimensions: 180/75/H1100 mm Hfsdpfx Aju I Hpyeh Hep -Weight: 2.0 kg

Condition: used, Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -2x prisms: as a set -Price: for one set -Dimensions: 130/75/H150 mm Hedped Edfqofx Ah Hefp -Weight: 10 kg

Condition: used, Bending tool, die, lower knife, lower tool, prism tool Hsdpfefckflex Ah Hefp -Tool for: press brake -Prisms: 90° 12 mm -Drawing: in the photos -Length: 4200 mm (2 x 2100 mm) -Dimension: 20 x 75 mm -Weight: 44 kg