Injection molding machine

KraussMaffei KM 200-1400 CX

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Ppedpeyaizvsfx Anzow Additional equipment • Hydraulic ejector • Side air valve • Robot interface • 4-zone mold temperature control system Machine Benefits Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Extra Information Machine still under power

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 Ppedpstrya Rofx Anzew - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Pedpju Eki Sofx Anzepw Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Condition: like new (used), Year of construction: 2008, operating hours: 6,200 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 75 mm, Krauss-Maffei KM 420-2000 CX Krauss-Maffei injection molding machine, 420 tons of clamping force. Only 6,000 hours of automatic operation. Year of manufacture 2008. MC5 control. Screw diameter 75 mm. Extras: 8 hot runner zones. 2 cores on fixed platen, 2 cores on moving platen. 1 pneumatic valve on moving platen. The injection molding machine is delivered reconditioned by UK Transitus' expert technical team. We can offer commissioning at our clients' facilities, ensuring operation upon completion of the installation. Technical Details 75mm screw Injection pressure: 1635 bar Podpfx Ajwq D Efonzspw Shot volume: 1237 cm3 Shot weight: 1126 g Maximum distance between plates: 1400 mm Minimum mold thickness: 380 mm Opening stroke: 1020 mm Distance between columns: 900 x 800 mm Plate dimensions: 1270 x 1230 mm 75mm screw Clamping force: 4200 kN Year of manufacture: 2008 Working hours: 6282

Condition: excellent (used), Year of construction: 2011, operating hours: 28,000 h, functionality: fully functional, clamping force: 1,300 kN, For sale is a hybrid injection molding machine, 2 components, of the brand KraussMaffei and type KM 130-750 CX The machine is in very good condition, ready for immediate use, with low operating hours. Electronic injection unit and dosing unit, hydraulic clamping unit. Technical data: Year of construction: 2011 Operating hours: 28,000 h Ppedpfou Hxm Ujx Anzew Clamping force: 130 T Cylinder Ø 30mm / 40 mm (& 2*50mm additional) Core pull: 1*Hydraulic Valve gate: Pneumatic Tie bar extension: 160 mm Internal pressure transducer Selector switch On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 Ppodpfouggb Dex Anzsw ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6 Psdpfx Aneud H Dmozspw  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, New unit MASS International NS3 Speciale Angle conveyor with separator available for short-term delivery Example as shown in the picture: L-shaped conveyor with double roller separator Infeed section 600 mm Inclined section 1300 mm Usable width 450 mm Overall width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the infeed section and in the incline PU belt, black, with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Lateral collection plates in the infeed section Podpfod Tidxsx Anzjpw Also available as an option: angle conveyor with Super Grip belt and separator (see the last two photos) Double roller separator with covered belt drive equipped with Super Grip adjustable discharge chute

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar Psdpeyf Uy Ujfx Anzspw 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133477-100, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 1,735 bar, injection weight: 183 g, mold height (min.): 250 mm, ejector stroke: 140 mm, opening stroke: 500 mm, plate length: 670 mm, plate width: 670 mm, total length: 4,500 mm, total width: 1,400 mm, total height: 2,000 mm, overall weight: 4,500 kg, heating capacity: 11.4 kW (15.50 HP), pressure: 275 bar, pump power: 18,500 W, power: 38 kW (51.67 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 80 A, Model: HM 110/350 UNILOG B6E Machine No.: 133477-100 Year of construction: 2011 Weight: 4500 kg Hydraulic system pressure: 275 bar Wiring diagram No.: HMB6E133477-100 Largest motor FLA: 33.4 A Pedpfxoyw Udxs Anzepw Control voltage: 24 V DC Electrical: 400 V, 80 A