Used Mitutoyo Pj 300 for sale (123)

Condition: good (used), Year of construction: 1995, 1 x profile projector Mitutoyo PJ 300 Year of manufacture: approx. 1995 Technical data: Screen diameter 306 mm Magnification 10x + 20x Gtodpfx Adsrn I R Temst Magnification accuracy Incident light +/- 0.1% Transmitted light +/- 0.15% Digital display resolution 0.001 mm The projector can be viewed when it is powered.

Condition: used, In our estimation, the machine is in good used condition and can be inspected under power by appointment. There are 2 identical units available. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Gtjdpfox R U R Sex Admst Subject to changes and errors in technical data and information as well as prior sale!

Condition: good (used), Standard equipment - Basic device profile projector Mitutoyo PJ 3000 - Ground glass D 300 mm with clamp for fastening of a radius template - Objective 10x and reflected light mirror - Measuring table with travel ... a) MT X 100x Y 50 mm or 150x50 mm with glass plate - Illumination device for transmitted and reflected light (24V/150W) - Calibration protocol I Instructions D Gtsdpjp H Ta Defx Admet Delivery I Instruction I Factory and Daaks calibration possible

Condition: good (used), Micrometer screws, micrometer screws, tooth width measurement, plate measuring surfaces -Measuring range: 275-300 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -Measuring force: Ratchet -Adjustable dimensions Gtsdpfx Adeb A R H Demst -Hand protection -Key -Quantity: other sizes also available -Weight: 1.5 kg

Condition: excellent (used), • Sturdy, stable aluminium base • Two guides for smooth travel • LCD display with clear readout • Functions: ON/OFF, ZERO, HOLD, PRESET • Original “Made in Japan” quality • Readable serial number – authenticity guaranteed Gjdpfx Adew Rdt Ijmstt • Very good condition – used, tested equipment • No play, accurate and repeatable measurement • Ready for use – no additional accessories required An excellent tool for workshops, toolrooms, quality control departments, and precision measurement tasks.

Condition: excellent (used), For sale: Professional digital height gauge Mitutoyo (model 192-613) – Japanese precision and reliability in a single device. Ideal for workshops, quality control, and precise measurements. Gtjdpfx Aew N Hn Sjdmjt Specification: • Measuring range: 0–300 mm • LCD display – clear readings even in low light • Functions: ZERO/ABS, PRESET, HOLD • Power supply: CR2032 battery • Stable base ensuring secure support and accurate measurement • Original – Made in Japan Condition: Device is fully functional and well maintained,

Condition: excellent (used), Two digital calipers Digital caliper Mitutoyo 551-231-10, measuring range 300mm Digital caliper Mitutoyo 500-181-U, measuring range 150mm The batteries have been replaced or are in good condition. Gtedpsw Tctrofx Admet The measuring tools can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this supplier".

Condition: ready for operation (used), Mitutoyo PJ321F, projection lens: 10x/20x/50x/100x, projection screen: 315mm, material: finely ground glass, rotation range: +/-360°, angle display: digital, resolution: 0.01°, contour illumination: +/-0.1%. On-site inspection is possible. Gjdpowgnf Ujfx Admett

Condition: excellent (used), Mitutoyo contour&roughness measuring machine Formtracer CS 3000 H4 in very good condition measuring ranges: Z = 5mm (stage 350mm) X = 100mm Machine was completely overhauled und got a used PC (new installed) and nearly new software Formtracepak 5.3 Overhauled measuring table (50x100mm) and self centering vice for € 2.000,-- on demand. Included are a lot of measuring tip (new price appx. € 3.000,--) Gtedpfjp Ecg Rjx Admjt Optionally we offer installation, calibration and softwaretraining Price is for delivery inside european union

Condition: good (used), For sale: Mitutoyo micrometer set for external measurement in the range of 200–300 mm. Precise Japanese analog micrometer with an accuracy of 0.01 mm. The set includes everything shown in the photos. - Original Mitutoyo frame with lightweight construction - Measuring head with clear scale - Set of 4 measuring rods - 3 measuring anvils - Standards and adjustment tools - Multilingual user manual - Sturdy wooden case with foam insert Gtedpfx Adou S Slxsmst Condition: The set is in like-new condition. All components are complete and well-maintained.

Condition: used, This listing is for the Mitutoyo IP65 External Micrometer The unit is in full working condition and is ready for immediate release Imperial or Metric reading Large LCD display Protected to IP65 for use where coolant may be present Original setting and Auto power off Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm Gtsdsxv A Ruspfx Admot Supplied with Batteries, instruction manual and storage case. Mitutoyo Micrometer The Mitutoyo external micrometre has a measurement range of 0mm to 25mm with an accuracy ±1μm. This is high tech, robust, battery-operated device. The Digimatic micrometre offers outstanding accuracy with and without data output. It consists of an oil-resistant material used for all plastic parts. The excellent resistance against water and dust enables this micrometre to be used in machining situations that include splashing coolant fluid.

Condition: good (used), Vernier caliper, vernier caliper, vernier caliper Gsdpjuwgftefx Admett -Manufacturer: Mitutoyo, caliper with fine adjustment -Measuring range: 0-750 mm / 0-30" -Reading accuracy: 0.05 mm / 1/128" -Box dimensions: 1030/300/H50 mm -Weight: 5.5 kg

Condition: good (used), 1 used hardness tester Manufacturer: Mitutoyo Model: Wizard 810 208 D Testing methods: Rockwell Brinell Gedpfxsxup Uwe Admott

Condition: used, Year of construction: 2015, We offer this used Mitutoyo QVT1-X404P1L-D coordinate measuring machine, year of manufacture 2015. Gtedex Tiihopfx Admst Model: QVT1-X404P1L-D Code No.: 364-180SY SO No.: Serial No.: 60866040 Year of manufacture: 2015 If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Mitutoyo 519-326 lever probe / measuring probe for MU-Check, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Gtodpfx Adei Eb Rbemjt

Condition: used, Technical details: measuring range Y-axis: Höhe: 0 - 600 mm interface: RS232 weight: 24 kg power consumption: 43 Watt Floor Space WxD: 0,237 x 0,448 x H: 1,013 m Gtedpfexcvqnex Admot High-precision height measuring device Linear Heigth with a glass scale for high accuracy. With LCD display and keypad. This is a table-top device. The main unit can be easily moved in a semi-floating position on a measuring plate using a push-button (float switch). The carriage can perform both automatic and manual movements. incl. eccentric probe at the tip with a ball Ø 4.5 mm Data output RS-232C interface the measuring carriage is guided by roller bearings, motor-driven and/or manual Measuring system - glass measuring system (incident light method) Compressed air supply via built-in compressor Operation via control panel (with graphic display) with granite plate without table *

Condition: used, This listing is for the Mitutoyo BM1-8-1B/PD Gauge block set The unit is in full working condition and is ready for immediate release Gsdpoxv A Rzofx Admstt This Mitutoyo 81-piece rectangular steel gauge block set is crafted from high-chromium alloy steel and features an ultra-micro-lapped surface finish for precision and durability. Carefully heat treated and stress-relieved, these blocks provide exceptional wear resistance, stability, and wringing performance, ideal for high-precision calibration, inspection, and tooling environments. Mitutoyo gauge blocks meet or exceed all internationally recognized standards (ASME, ISO, JIS), with flatness, parallelism, and surface finish that often surpass government specifications

Condition: used, Internal micrometer screws, micrometer screw, inner diameter, internal fine measuring instrument, cylinder gauge, -Handover: in its current condition as inspected Godpol Ha R Hjfx Admett -Condition: incomplete, see pictures -Measuring range: -150 mm -Dimensions: 280/450/H60 mm -Weight 2 kg

Condition: ready for operation (used), Year of construction: 2001, Additional Equipment Software: QSPAK Version 3.1 / Operating system: Win10pro This 3-axis Mitutoyo Quick Scope QS-250Z was manufactured in 2001. It features a measuring range of X=200 mm, Y=250 mm, Z=100 mm, and a maximum travel speed of 80 mm/s. The machine includes a 1/3" CCD color camera and various lighting options, enhancing visibility and precision. Ideal for detailed component analysis, consider the opportunity to buy this Mitutoyo Quick Scope QS-250Z CMM machine. Contact us for more information about this machine. Gtsdpfx Adex Nr Tbomjt Application Types Measuring

Condition: used, Year of construction: 2002, Technical details: measuring range X-axis: 505 mm measuring range Y-axis: 705 mm measuring range Z-axis: 405 mm table-size: 638 x 1160 mm max. workpiece weight: 180 kg workpiece height max.: 540 mm Passage height: 630 mm distance between columns: 680 mm table height above floor: 745 mm compressed air: 0,4 MPa Air consumption: 100 l/min. voltage: 100, 120, 220 oder 240 VAC / 50/60 V / Hz total power requirement: 700 Watt dimension machine xH: 1,46 x 1,08 x 2,20 m CNC 3D coordinate measuring machine Measuring system/position control: CMMC-J type, optoelectronic glass scales and speed control via pulse generator Operating modes: CNC operation and/or joystick operation Gtsdsu N Atkopfx Admot Measuring software: MCOSMOS v. 3.5.R3 PC system: Windows 7, 16 GB RAM New 2022 swivel head installed. Renishaw PH10T+ motor. Rotating/tilting head Renishaw PH10-3 PLUS touch probe; Renishow hand-held control unit and Renishow PH10-T Plus measuring system Renishaw interchangeable system/probe magazine SCR200 for 6 probes Granite measuring table Annual maintenance carried out by Mitutoyo until 2023. Some accessories: such as TP200 probe system, various measuring tips (made of carbon) and holders as well as extensions, calibration ball, 3-jaw chuck, vice *

Condition: used, This listing is for a Mitutoyo DP-3 Calculator Gedpfxjxzhv He Admett

Condition: good (used), Height gauge, parallel gauge, height measuring device Gtedoiaql Nepfx Admet -Manufacturer: Mitutoyo, Height Gauge Type HS-100 -Max. working height: 1000 mm -Dimensions: 250/155/H1340 mm -Weight: 15.6 kg

Condition: ready for operation (used), Year of construction: 2023, This Mitutoyo Crysta Apex C 7106 was manufactured in 2023. It has been completely overhauled and features various probe trees along with GEOPAK and CAT1000PS software. Kept in a measuring room and regularly calibrated, this machine ensures reliable precision. Contact us for further details regarding this machine. • Completely overhauled in 2023 • Machine kept in the measuring room • Regularly calibrated Additional equipment Gtjdsx Iliajpfx Admjt • Various probe trees • GEOPAK and CAT1000PS software

Condition: used, Year of construction: 2002, Technical details: x-travel: 505 mm y-travel: 405 mm z-travel: 405 mm Gtedju S Izcepfx Admjt measuring range X-axis: 505 mm measuring range Y-axis: 405 mm measuring range Z-axis: 405 mm compressed air: 0,4 MPa voltage: 100/120/220/240 V / Hz total power requirement: 700 Watt machine weight approx.: 0,5 t dimension machine xH: 1,1 x 1,1 x 2,185 m further features: -it is a linear measuring system with resolution 0.0001mm -measuring speed X/Y+Z-axes 430 mm/s -acceleration X/Y+Z-axes 980 mm/s² -measuring table made of granite, size LxW: 638 x 860mm, with workpiece clamp -max. tool size height max. 545mm weight max. 180kg Equipment: -Measuring probe Renishaw TP200 -Computer Fujtsu - Siemens Scenic P; protection class IP30 -without measuring probe -Software available (USB Stick) *

Condition: used, This listing is for a Mitutoyo 202TP Vision Measuring System Gtjdpfx Ajxzgtdsdmot