Non-ferrous metal separator

IFE INP 400x2000x6

Condition: used, Year of construction: 2001, inner diameter: 450 mm, wall thickness: 11 mm, overall weight: 3,200 kg, System: Decanter / centrifuge, used Manufacturer: Hiller Cgjdsvz A Uzepfx Afnen Model: DP45-422 Mach. No.: 2818 Year of manufacture: 2001 Maximum drum speed: 3800 l/min Drum inner diameter: approx. 450 mm Drum wall thickness: 11.0 Drum material: H2/ST52 Weight: approx. 3200 kg Permissible density 1.50 kg/dm3

Condition: ready for operation (used), Jaw Crusher Kleemann Cgodeu S Tqvspfx Afnsn Brand: Kleemann Type: SSTR 1250 Feed Opening: 1250 x 950 mm Incl.: E-motor Weight appr. 38 Tons

Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: Csdpslc Dwvofx Afnegn 1) CT-6 Centritherm evaporator mounted on skid 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel 4) Duplex filter 5) Feed pump model 6) Concentrate pump model 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping 11) Tools for lifting cones and the bowl 12) Original technical documentation in German.

Condition: good (used), Used radial drill SASS Mod.TRM 2200 Excellent condition, fully functional. Cube supplied Maximum diameter drilling from solid cast iron 20-22 100 mm Maximum diameter drilling from solid steel R=60 80 mm Sliding quill spindle diameter 102 mm Spindle morse taper 6 Spindle vertical travel 500 mm Cgjdpfxoikqz Se Afnsn Rotational speed 32 Spindle speed values with 50 Hz motor - rpm/1' 18 ÷ 1600 Automatic feeds Maximum reach from column edge to spindle axis 2230 mm Minimum and maximum drilling radius 660 ÷2505 mm Head displacement on arm 1845 mm Vertical arm displacement 1040 mm Column diameter 550 mm Column height with motor 3720 mm Base plate height 260 mm Base plate height 2490 x 1230 mm Spindle motor 11 HP Weight 9000 kg

Condition: new, functionality: fully functional, machine/vehicle number: NEW-5, empty load weight: 734 kg, maximum load weight: 2,766 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, Year of construction: 2025, brakes: other, New series! Rear tipper with standard electric tipping function and low loading height, braked tandem high-bed trailer with all-round foldable and removable aluminum drop sides, welded, hot-dip galvanized steel frame, wooden floor covered with steel plate, lashing points on the sides of the floor in a V-groove, automatic jockey wheel, 13-pin electrical system with reversing light, low chassis. Plus freight to Gera and vehicle registration document €250 net. Codpfsghpc Nsx Afnegn Optional accessories available at extra charge: mesh sides, tarpaulin and frame, 100 km/h equipment, integrated loading ramps, support stands, etc. Delivery available at extra cost! Financing / leasing possible. Pictures are for illustration only, some shown with optional accessories at extra charge!

Year of construction: 1979, condition: ready for operation (used), A Gebr. Pfeiffer ball mill is available. Drive power: 330kW, diameter: 2400mm, length: 5000mm, number of motors: 2, motor weight: 180kg, flywheel width: 3.2mm. On-site inspection is possible. Codpfx Aov Dwirofnjgn

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For optimum recovery of non-ferrous metals or purification of materials Cgjdpsvdqdiefx Afnjn This extremely powerful machine is mainly used for processing household waste, shredder materials, household appliances, wood, plastic, glass, IBA and bed ash and electronic scrap. This IMRO non-ferrous metal separator stands up to the demands of very high recovery quotas and high purity levels.

Condition: used, Year of construction: 1991, It is almost better than a new one. The machine has been completely overhauled and is equipped with a PLC, enabling fault monitoring and advanced control functions. A power meter is also installed. The system stops automatically after a set time when it is empty, so there is no need to switch it off manually. Once the machine finishes crushing, it shuts down automatically. If the shaft becomes too difficult to rotate, the press stops applying pressure while the rotor continues to rotate. Once the shaft can rotate freely again, the machine automatically resumes pressing. This makes the crushing process significantly more economical and reduces unnecessary wear on components. If the load does not decrease, the press retracts. If the load still does not drop, the crusher shuts down and indicates an overload, preventing damage and further wear. Waste Crusher For shredding particleboard and solid wood waste, drive power 18.5 kW, throughput 1000 kg / h for chipboard waste, 350 kg / h for solid wood waste, screen diameter 25 mm, rotor diameter 235 mm (circle), width 1070 mm, 120 rpm, feed unit : Sectional steel construction , driven by hydraulic cylinders, in plastic guide rails, laterally with rollers, main drive E-motor with turbo coupling, V-belt drive, 2-stage helical gearbox, motor rated power 18.5 kW, rated current 36.5 A, 1455 rpm, 400 V, 50 Hz, Degree of protection IP 54, Type B 3, V-belt pulley Turbo clutch D 1 = 200 mm, V-belt pulley Drive D 2 = 200 mm, Number of V-belts Z = 3 pieces, V-belt Effective length LW = 1900 mm, center distance ENOM = 635.84 mm, Door length L = 635.84 mm, impression depth EA = 23.35 mm, test force per V-belt F = 75?, Turbo coupling: hydrodynamic coupling, load-free starting of the electric motor, overload protection, hydraulic ic unit: Compact unit with 2 operating speeds, drive power 1.0 / 1.4 kW, drive pressure max. up to 180 bar, extraction nozzle: minimum air velocity V = 28 m / s, inlet length 1200 mm, inlet width 1050 mm, Bst Ijt Dh T De H Excolc waste shredder with universal rotor- dimensions in mm: approx. 6500 x 2700 x 3600, weight in kg: approx. 2300, Cgsdpfxet Dh T De Afnon Machine quality: fully operational after maintenance.

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Cgsdpstgqlysfx Afnsn Rotor width 2500 mm Rotor diameter approx. 400 mm Motor 75 kw Discharge via conveyor belt with magnetic roller

Condition: ready for operation (used), Machine was overhauled and is fully functional, with documentation. Csdpfx Afsfw Az Usnjgn