Vertical machining center

Hurco VMX 42 i

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,800 h, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h (estimated) • Due to the installation of a new hard drive, the spindle hours can no longer be accurately verified. • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Only steel and aluminium have been machined. • Internal coolant system • The machine has a double-wound AC spindle motor. • The axes are also directly driven. • The machine does not have a direct measurement system. Rcsdpfx Aey Tw R Hsdzef Additional equipment • Chip conveyor • WinMax Mill Version V09.01.39314 • Removable handwheel • No Accessories included, but can be purchased at a reasonable price for an additional charge. Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating status Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Rjdpfx Asxrcnljdzocf

Condition: like new (used), Year of construction: 2018, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: HURCO MAX5, overall weight: 6,500 kg, spindle speed (min.): 12,000 rpm, operating hours of spindle: 3,900 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, The machine is in like-new condition and ready for immediate use. Rcsdezuxidepfx Adzsf A video can be sent upon request.

Condition: excellent (used), Year of construction: 2018, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Redpfxozmy T Us Adzocf Internal coolant system Chip conveyor Detachable handwheel

Condition: good (used), Year of construction: 2010, 2010 Hermle C50 U MT Dynamic 5 Axis Vertical Machining Centre With Turning Capability & Dual Siemens 840D Controls Table Dimension Ø1,000mm (16 16mm H7 'T' Slots). Maximum Table Load 2,000kg (1,000kg Turning). Maximum Component Dimension Ø1,000 x 810mm High. Axis Travel 'X'=1,000mm, 'Y'=1,100mm, 'Z'=750mm , 'A'=+100°/-130°, 'C'=360°. Rapid Traverse 'X'60m/min, 'Y'=60m/min, 'Z'=65m/min. Maximum Spindle Speed 12,000rpm (56kW Motor). Maximum Turning Spindle Speed 500rpm. Spindle Taper HSK A100. 84 Position ATC (Additional ZM 42 Magazine). Maximum Tool Ø250mm, Maximum Tool Length 430mm, Maximum Tool Weight 30kg. Chip To Chip Tool Change Time 7s. S/No. 19871 (2010). Machine Hours 89,860.9 , Drive Hours = 74,916.2, Spindle Hours 10,585.7, Work Spindle Hours 566.0 (New Spindle Installed 2023). Redpjzt Nywofx Adzjcf With Knoll KF 400 Through Coolant Paper Filtration System, Knoll S-1 Chip Conveyor, Swarf Bin, Handte Mist Extraction Unit, Hyfra Pedia VWK70-DE-S Chiller Unit, Brand New Blum Laser Toolsetter, Quantity Of Tooling In ATC, Renishaw MP40-2 Spindle Probe, Visiport TK2 Spin Window, Blum Reference Tool In Carry Case, Heidenhain Calibration Kit In Carry Case, Automatic Doors, Retractable roof For Loading & Technical Manuals. Weight 21,500kg. Technical Agreement/Specifications Are Located In A Folder Inside Control Panel. Machine Is A Clean & Very Good Condition, Only Issues Are Internal Lights Not Working (No Faults As They Were Repaired Last Month Through Kingsbury). We Run Fusion 360 Through The Machine.

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler Hurco MAX 5 control with WinMax software Rcjdpjzguh Hjfx Adzof

Condition: used, Year of construction: 2014, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 Rsdszguhyepfx Adzecf SK40 tool holder Internal coolant supply Spindle cooler

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Rcjdpfju Idbysx Adzof Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: ready for operation (used), Year of construction: 2014, operating hours: 12,000 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,067 mm Travel range, Y-axis: 610 mm Redjzapr Uopfx Adzscf Travel range, Z-axis: 610 mm Number of axes: 3 Spindle speed: 12,000 rpm Drive power: 12 kW Torque: 237 Nm Table size, X-axis: 1,270 mm Table size, Y-axis: 610 mm MACHINE DETAILS Number of tools in the magazine: 30 Tool holder: SK40 Operating hours: 12,000 h EQUIPMENT Internal coolant supply Spindle cooler

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,200 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Hurco MAX 5 mit WinMax Software, TECHNICAL DETAILS Travel range X-axis: 1,067 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Number of axes: 3 Number of tools in the magazine: 30 Tool holder: SK40 Table size X-axis: 1,270 mm Redpfozaprzex Adzscf Table size Y-axis: 610 mm MACHINE DETAILS Control system: Hurco MAX 5 with WinMax software Drive power: 12 kW Torque: 237 Nm Operating hours: approx. 7,200 h EQUIPMENT Internal coolant supply Spindle cooler

Condition: excellent (used), High-performance spot welding tongs with a double-acting cylinder Manufacturer: DALEX, Type 3528 - 4 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31 kA Electrode force: 60-730 daN Double-acting cylinder, long stroke 62 mm, pre-stroke 40 mm Working stroke with stroke adjustment 0-22 mm with 5/2-way solenoid valve Cardan suspension and mounting bracket 10 m connection cable with control cable Arm extension: 170 mm Arm distance: 170 mm Complete with 1 pair of electrode arms, straight on the top and bottom, 170 mm Rcsdpfxoki Tkpj Adzef Synchronous welding control MPS 1036 Example photo

Condition: excellent (used), Year of construction: 2014, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Rcsdozam E Ejpfx Adzsf Spindle speed: 12,000 rpm Tool magazine for 24 tools, SK 40 Internal coolant system Chip conveyor Removable handwheel

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, overall weight: 6,850 kg, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2013 and features X-Travel of 1067 mm, Y-Travel of 610 mm, and Z-Travel of 610 mm, with a tool holder SK40. If you are looking to get high quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information. • Spindle hours: approx. 12,603 h Rcjdjy Tw Ryepfx Adzof • Total power requirement: approx. 28 kVA Additional equipment • Chip conveyor • Internal coolant system Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment. Rcsdpfezc D E Isx Adzof

Condition: used, Year of construction: 2013, operating hours: 12,000 h, Hurco VMX42i WinMax control Rsdpfx Asri N A Hsdzecf Table clamping surface 1270 x 610 mm Table load 1750 kg Travel X axis 1067 mm y-axis 610 mm z axis 610 mm Tool holder SK 40 Spindle speed max rpm 12000 Spindle power max 18 KW Tool changer 30 times Tool diameter max 80/76 Tool length 300 mm Machine weight 6850 kg Coolant tank 484 liter