Planer-Type Milling M/C - Double Column

Heyligenstaedt Heynumill 2700-PF

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Control: Heidenhain TNC 430 X-axis Y-axis Z-axis Lajdpoyaazmsfx Aklsg 3,000 mm 4,000 mm 1,500 mm In 2018, the Heynumill underwent a complete overhaul of the hydraulic system, replacement of all electrical cables, renewal of the spindle cooling unit, both longitudinal conveyors were replaced, and the milling heads were completely refurbished. The entire refurbishment cost €160,000. In 2020, the milling gearbox was renewed.

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) Lodpfx Akjyidvdsloag - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm Laedpfx Aex R Em Doklsg max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm swing diameter: 1000 mm Laodpfx Aet Rmdzeklog Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis *

Condition: excellent (used), Year of construction: 2013, operating hours: 5,785 h, Okuma Genos L300e-MY turning center Year: 2013 Technical details: Control OSP P300L-R Turning diameter 340 mm Turning length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3000 1/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Minimum indexing C-Axis main Spindle 0,001 ° Number of tools on turret 12 Spindle speed driven tools 45 - 4500 1/min Number of driven tools 12 position Tool Taper VDI40 Spindle motor driven tools 7/3,3 kW Bar feeder SPACESAVER 2210 ( 1500 mm bar lenght, up to 67 mm diameter ) Machine dimensions 4370x2540x2490 mm Weight 7500 kg Accessories/options: Ljdpfezat Tvjx Akloag - SPACESAVER 2210 barfeeder - swarf conveyor - parts cather - Renishaw tool measuring arm - Driven tool holders - Static tool holders - Hydraulic chuck - Jaws for chuck - Documentations - Dust extractor

Condition: excellent (used), Year of construction: 2014, functionality: unexamined, workpiece weight (max.): 2,500 kg, total width: 3,200 mm, total length: 15,800 mm, distance between centers: 6,000 mm, workpiece diameter between centers: 850 mm, overall weight: 19,000 kg, We offer this very good Hol-Monta spol.sro UB 85 / 6000 CNC cylindrical grinding machine, year of construction 2014. Model: UB 85 / 6000 CNC Control type: Kavalir K 51-2 Serial number: H 214 09 005 Swing dia. 850 mm Center distance 6 000 mm Lodpfx Akjy Hgrgoljag Internal Grinding attachment Steadyrests etc.

Condition: used, Year of construction: 2001, STAR sliding headstock automatic lathe S16-R, year of manufacture from 2001. Sliding headstock lathe SA16-R, Ø16mm with FMB Minimag magazine. Sub spindle. Parts conveyor belt. Coolant system has only operated with oil. No chip conveyor. Laedpfxexmurro Aklsg

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Laodohpqquspfx Aklsg Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Weight: 4,8to

Condition: used, Year of construction: 2012, New mill spindle 2026 Turning diameter: 760 mm Turning length: 1540 mm Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 12,000 rpm Tool changer: 40 positions Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Options: High pressure coolant 60 bar Auto door & Safety Edge Auto tool setter Coolant blast for chuck jaw cleaning Coolant gun Dual chuck pressure LNS Bar feed interface Laodpfx Akezg N Dijleg Prep. for special steady rest lower turret Thru-coolant for Main and Sub spindle Tool load monotoring function Profibus 3 color patrol lamp Renishaw RMP60 INCL. high speed SKIp Function

Condition: used, Year of construction: 2017, turning diameter 340 mm turning length 1000 mm control Mazatrol SmoothC Laodjy E Txdopfx Akljg