Howden TWIN CA46 1.6 MW steam turbine
Howden KK&K TWIN CA46

Name: Howden KK&K TWIN CA46
Brand: Howden
Availability: InStock

Year of construction

2024

Condition

New (fully functional)

Location

Cremona

Howden TWIN CA46 1.6 MW steam turbine Howden KK&K TWIN CA46

Machine data

Machine type:: Howden TWIN CA46 1.6 MW steam turbine

Manufacturer:: Howden

Model:: KK&K TWIN CA46

Year of construction:: 2024

Condition:: new

Functionality:: fully functional

Price & Location

Location:: Via delle Vigne 166, 26100 Cremona, Italia

Call

Technical details

Pressure:: 16 bar

Input frequency:: 50 Hz

Type of input current:: three-phase

Temperature:: 400 °C

Input voltage:: 6,000 V

Rotational speed (min.):: 1,500 rpm

Rotational speed (max.):: 1,500 rpm

Type of cooling:: air

Details about the offer

Listing ID:: A21204515

Reference number:: KK&K TWIN CA46

Update:: 10.02.2026

Description

Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty.

Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope.

The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service.
It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment.

Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months.

Main supply includes:

- Steam turbine on skid with integrated gearbox
- Synchronous generator supplied separately

Turbine technical configuration:
- Model: KK&K TWIN CA46
- Dual-casing turbine (Steam Part A + Steam Part B)
- Integrated three-shaft gearbox (2 pinions + central wheel)
- Controlled steam extraction between HP and LP sections (included)

Kdjdpfxsyidvdo Afxsp
Main design conditions:
- Inlet steam pressure (HP): 16 bar(a)
- Inlet steam temperature: 400 °C
- Electrical output at terminals: up to 1,595 kW
- Nominal speed: 1,500 rpm

Electric generator:
- Three-phase synchronous generator
- Rated output: 1,994 kVA
- Voltage: 6 kV – Frequency: 50 Hz
- Cooling: IC31, air
- Brushless construction, parallel grid operation ready

Included systems:
- Integrated baseplate oil system
- Main mechanical oil pump and auxiliary electric oil pump
- Local panel on skid
- Control and protection panel with Siemens SIPROTEC 5 system
- Electronic speed and pressure governor
- Independent overspeed protection device
- ENC-RfG turbogenerator simulation model

Typical applications:
- Industrial cogeneration plants
- Energy recovery from process steam
- Biomass and waste-to-energy plants
- Combined production of electricity and process steam

Status and conditions:
- Condition: NEW
- Year of manufacture: late 2024
- Never installed – never commissioned
- Still under manufacturer’s warranty
- Complete OEM technical documentation available
- Installation and commissioning support from the manufacturer available

Potential application fields:
- Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times
- Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries)
- Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times

Price: on request.
Further technical information and documentation available upon request.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2024

1 listing online

Call

Send inquiry

Telephone & Fax

+39 334 6... show

These listings may also fit your interest.

Listing

Wood shredder, shredder, chipper mütek MRZ 830 ECO

Neckartailfingen

1,333 km

Wood shredder, shredder, chipper
mütekMRZ 830 ECO

Call

Condition: as good as new (ex-display), Demonstration unit with 7 operating hours immediately available (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Year of manufacture: 2023 Infeed opening 800x1000 mm Motor: 22 kW; 400 V - 50 Hz - 3 phase Blades: multiple-rotation hydraulically actuated slide Screen size selectable (10 - 40 mm) Weight approx. 1,600 kg Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star/delta start - fast hydraulics - auto. OFF when rotor is idling - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Shredder raised by 30 cm (preparation for conveyor belt) Additional shredder options: - Articulating conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - The moisture content (as received) must be below 30%, - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear. Kdjdpfx Afjv Sqrpoxep

See details

Listing

Block heat and power plant MTU COGENERATIONENGINES AoE16V4000L62

Frankreich

1,095 km

Block heat and power plant
MTUCOGENERATIONENGINES AoE16V4000L62

Call

Condition: used, Year of construction: 2010, operating hours: 13,800 h, power: 1,600 kW (2,175.39 HP), For sale are 3 MTU cogeneration modules / CHP plants manufactured by MTU Onsite Energy GmbH, model AoE16V4000L62, year of manufacture 2010. These plants are ideally suited for decentralized energy generation and combined heat and power (CHP) applications. Kdsdpeyt H H Nefx Afxjp Technical specifications (per documentation): * Electrical output: 1,600 kW * Thermal output: 1,746 kW * Gas power: Pgaz PCS 4,579 kW / Pgaz PCI 4,121 kW * Voltage / Frequency: 400 V / 50 Hz Operating hours: * GE1: 42,479 h * GE2: 13,800 h * GE3: 43,397 h The scope of supply, as per documentation, includes a comprehensive range of auxiliary equipment and system components, including: roof-mounted air cooler, auxiliary cabinet, control cabinet, exhaust heat exchanger, water heat exchanger, pipework and ducts with chimney, oil storage room with 3 tanks and piping, as well as electrical cabling. These plants represent an attractive solution for operators, resellers, and projects in the fields of energy supply, industry, or for spare parts recovery.

See details

Listing

Mouvaux

834 km

Meat processing machine
RondoPolyline

Call

Condition: ready for operation (used), functionality: fully functional, The Rondo Polyline meets the most demanding needs of the bakery and pastry industry. Its modular system allows for rapid shaping of multiple dough varieties, enhancing creativity and responsiveness to market demands. Furthermore, its stainless steel structure facilitates simplified maintenance, while removable components reduce cleaning times. This improves your compliance with hygiene standards while accelerating your production workflow. Furthermore, the intuitive interface makes it easy to adjust the thickness, speed, and pressure applied to the dough. This allows you to easily customize your recipes, whether for soft pastries, savory puff pastries, or a variety of rolls. Moreover, the seamless transition between different formats minimizes downtime and improves the consistency of final quality. Furthermore, the reliability of this line translates into continuous operation, ideal for meeting the challenges of intensive production rates. However, the Rondo Polyline isn't limited to simple large-scale production: it also adapts to shorter production runs, expanding your range of commercial possibilities. In addition, you enhance the value of your products thanks to precise shaping that highlights the artisanal aspect so appreciated by consumers. Ultimately, this equipment represents a strategic investment to boost competitiveness and attract new partners or demanding customers. Contact us today to discover how the Rondo Polyline can revolutionize your production and raise your quality standards. Technical specifications: Belt width: approximately 600 mm for dough pieces of various sizes Speed: up to 12 m/min to manage production peaks Adjustable thickness: from 1 to 30 mm for various recipes Kdjdpfjwdvtujx Afxjp Hourly capacity: approximately 1 t/h depending on the dough used Stainless steel structure: easy hygiene and reduced maintenance vz6n1BFZ

See details

Listing

Borken

1,033 km

Diffusion Pumps
Agilent / VarianNHS-35

Call

Listing

Helical bevel gear units Industrial gear units ASUG Penig Flender TGL 21815 10LA1 280/400x80

Radeberg

1,523 km

Helical bevel gear units Industrial gear units
ASUG Penig FlenderTGL 21815 10LA1 280/400x80

Call

Year of construction: 2016, condition: new, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Ksdpfogwlrdsx Afxodp Speed: n1 = 1400 Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !!

See details

Listing

Piston diaphragm pump, feeding pump Abel HMD-G-50-0500

Gladbeck

1,051 km

Piston diaphragm pump, feeding pump
AbelHMD-G-50-0500

Call

Listing

CNC Turning- and Milling Center INDEX R 200

Germany

1,279 km

CNC Turning- and Milling Center
INDEXR 200

Call

Condition: used, Year of construction: 2015, Technical details: turning diameter: 65 mm turning length: 120 mm control: Index C200-4D SL z-axis main spindle travel: 390 mm z-axis subspindle travel: 390 mm x-axis subspindle travel: 600 mm Travel Y1: ± 80 mm Travel y2: ± 80 mm x-axis rapids: 45 m/min y-axis rapids: 15 m/min z-axis rapid travel: 45 m/min Spindle 1 RPM: 5000 1/min Spindle 1 Power: 35,5/27,5 kW Kjdjyxpadspfx Afxodp Spindle 1 Torque: 170 /125 Nm Spindle 2 RPM: 5000 1/min Spindle 2 power: 35,5/27,5 kW Spindle 2 torque: 170/125 Nm c-axis: 0,00014 ° bar material dia.: 65 mm spindle nose: AD 140 spindle bore: 85 mm Milling spindle 1 RPM: 18000 1/min Milling spindle 1 power: 11 kW Milling Spindle1 torque: 19 Nm Milling spindle 2 RPM: 18000 1/min Milling Spindle 2 power: 11 kW Milling spindle 2 torque: 19 Nm B-axes swivel angle: 230 ° B-axes torque: 440 Nm B-axes angle resolution: 0,001 ° Milling spindle 1 & 2 tool magazine: 80 HSK A40 Milling spindle 2 tool magazine static tools : 6 x VDI 25 internal coolant system feed: Knoll 80 bar / Ecofluid weight of the machine ca.: 16,3 t dimensions of the machine ca.: 3,73x2,92x2,58 m Accerories Chip conveyor Spindle 1 Chuck SMW HFKN 165-46 mm Spindle 2 Chuck SMW HFKN 165-46 mm Collet chuck main spindle Hainbuch Spanntop Collet chuck subspindle Hainbuch Spanntop Barfeeder Interface Unimag Short bar loader IRCO ILS RBK 10016 Parts catcher for main- and sub-spindle Conveyor for partsdisposal Air Filter Büchel High performance heavy duty turning and milling center with 2 multi axis milling heads and two spindles. Both milling heads are full 5-axis. The z-axes are installed in the spindle heads The x2 axis is installed in the spindle head of the subspindle Milling1 head has x/y/b -axes Milling head 2 has y/b-axes Both milling heads have B-(Swivel-)axis 230° The machine is equipped with an IRCO short barfeeder and parts gripper for finished parts. Max. dim for finished parts: Ø 65 mm, length 120 mm, weight 5 kg. Rest piece length 200 mm All linear- axes are equipped with linear scales. Coolant through main and subspindle. Tool breakage control from drill Ø 1mm All existing tool from machine are part of delivery Machine is in excellenten Condition! *

See details

Listing

Corrugated line LUM Corrugated line 5 ply

Sofia

2,605 km

Corrugated line
LUMCorrugated line 5 ply

Call

Condition: used, Year of construction: 2024, functionality: fully functional, Corrugated line 5 ply. Fully renewd 2024, 1650mm width. Steam matic, boiler steam producing 2500 kg/h. Max pressure 19 bar. Speed up to 70 metr per min. 1.⁠ ⁠Total Length: 55 metr 2.⁠ ⁠Total Power: 150 kw 3.⁠ ⁠Frame with shaft 4.⁠ ⁠Corrugated paperboard marching: diameter of corrugated rouer, electric adjust speed moter used. 5.⁠ ⁠Double cylinder gum mounting marchine: On the adoption, inside two layers draw the gun, dascend to carry the paper lead the paper roller. Machine exists units: Hydraulic shaftless mill roll stands, Spindle ¢ 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Top paper preheat cylinders and core paper preheat cylinders. Both preheat 360 degress area. Kjdew R Sknepfx Afxsdp Single Facer Double Facer Blade scorer NC helical knife Glue system Gas system Steam system producing 2500 kg/h. Max pressure 19 bar. Working 12 bar. Top paper index 100g/㎡--180g/㎡ Ring crush index（N.m/g）≥8 (Water containing8-10%) Core paper index 80g/㎡--160g/㎡ Ring crush index（N.m/g）≥5.5 (Water containing8-10%) In paper index 90g/㎡--160g/㎡ Ring crush index（N.m/g）≥6 (Water containing8-10%)

See details

Listing

THREADING MACHINE EW.MENN GW63 refurbish EW MENN GW 63

Calolziocorte

1,525 km

THREADING MACHINE EW.MENN GW63 refurbish
EW MENNGW 63

Call

Condition: new, Year of construction: 2024, shaft length under head: 80 mm, thread length: 55 mm, travel speed (max.): 480 mm/min, THREADING MACHINE E.W. MENN GW63 Refurbished as new acc. to CE Stand. Completely overhauled. New Guides, vibrator, new vibrating evacuation. Kdsdpjt Uucasfx Afxep New electrical system with Inverter and PLC M8x80/55 mm. 480 ppm. Thread diameters (min./max.): 3 - 8 mm. Dies length: 115/130 mm. To be viewed and tested at HBR srl - Calolziocorte (LC)

See details

Listing

Germany

1,293 km

CNC Lathe
Style650/3000

Call

Condition: ready for operation (used), Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible. Kdodexr Nvcjpfx Afxjp

See details

Advertise here