CNC Lathe

MAZAK QT-Compact 300MYL

Condition: used, Year of construction: 1995, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Teilüberholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware KEL-ASSIST für Kelco 90 Kdsdpfxoyatx So Aa Isn numerisch gesteuerte B-Achse Innnschleifrinrichtung Dia 80mm Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 300mm Innenschleifspindel HJN 828 hydraulischer Reitstock Mikroverstellung KEL SET Messsystem

Condition: good (used), Year of construction: 2011, Machine is in very good working condition. Descriptionis and technical details are on photos. Kdjdox I Rkpjpfx Aa Ijn

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Kodpfju Uic Tjx Aa Iedn Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Description: The machine is in good technical condition, and a test run is possible by prior arrangement. Equipped with Siemens Shopturn system, including a bar feeder, and supplied in full configuration. BASIC PARAMETERS Max. turning diameter in working area: approx. 410–500 mm Max. length: 800 mm Distance between spindles: approx. 1020 mm Swing over bed: approx. 700 mm Practical application: ideal for shafts, flanges, and housings up to approx. 800 mm Travels (axes) X: approx. 480 mm Y: approx. 100 mm Z: approx. 800–845 mm B axis: approx. 110° (5-axis machining) C axis: 360° (indexing + interpolation) These features make it a true turn-mill center (not a conventional lathe) Spindles Main spindle speed: approx. 5000 rpm Power: approx. 25–34 kW Through bore: approx. 76–87 mm Sub-spindle speed: approx. 6000 rpm Milling spindle (main difference compared to a standard lathe) Speed: up to 12,000 – 20,000 rpm Power: approx. 19–22 kW Kedpfsy Rgafox Aa Isdn Taper: HSK-A63 or Capto C6 Capabilities: milling, drilling, tapping, 5-axis simultaneous operations Tool System Magazine: 24–48 tools Live tools: yes (fully integrated) Control system: Siemens 840D sl + CELOS (most common) Weight and dimensions Weight: approx. 10,000 kg Dimensions: approx. 6.5 × 2.7 × 2.0 m

Condition: used, Year of construction: 2003, turning diameter max. 420 mm turning length 1090 mm control FANUC Serie 18i-TB turning spindle Durchlass 108 mm 250 / 315 turning speed range 0-3750 U/min Feed speed 18/24 m/min. workpiece 12 quill stroke 100 mm Kdodpfxoucgyls Aa Ijn diameter of quill 110 mm taper MK 4 number of driven tools 12 mm turning speeds 3000 U/min 22 nm coolant tank 140 l total power requirement 22/18,5 kW weight of the machine ca. 6500 KG

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL, controller model: Matrix, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 40, number of axes: 5, This 5-axis Mazak Variaxis 500-5X II was manufactured in 2007. Ideal for complex and precise machining tasks, this vertical machining center offers versatility and reliability. If you are looking to get high-quality milling capabilities, consider the Mazak Variaxis 500-5X II machine we have for sale. Contact us for more information. Additional equipment • Swarf Conveyor Machine Benefits Ksdpfoyalk Hjx Aa Ijdn Technical Machine Benefits • A-axis: -120° / +30° • C-axis: 360° Extra Information Machine still under power

Condition: used, Year of construction: 2005, operating hours: 18,950 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 18950 Std Kodpfx Aajwzyvhj Iedn Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2005

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Kodpfx Ajvu E Nuja Ijdn Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V frequency 50 Hz Max. Line power 70 A total power requirement 48 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m taper in main spindle SK 45 table hole 40 mm control Siemens Sinumerik 840 C Gleason PFAUTER gear shaping machine Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Parts shown by hand not come. Kedoufp Svepfx Aa Iodn

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm throat 400 mm total power requirement 10 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. m Kdodpst Hw T Sefx Aa Ijn