Gesete XT 500 Bottle Dryer (2014)

Gesete Flaschentrockner

Condition: ready for operation (used), Year of construction: 2014, Number of decks: 1, total number of zones: 12, number of pairs of regenerative zones: 3, number of pasteurising zones: 5, number of separate cooling zones: 1, number of tunnel modules (without infeed and outfeed module): 12, pump side: right, belt load: 152.6 kg/m², max. belt load: 260kg/m², throughput capacity at 0.15l, 0.25l: 65,000 cans/h, with documentation, on-site inspection is possible. Iedpfx Asrn Ta Ueh Hobd

Condition: excellent (used), Year of construction: 1994, 2 fired steam boilers ----- Ibsdpfx Aevdbkmeh Hod - mounted on frame - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 sqm capacity : 800 kg/h permissible operating pressure : 10,0 bar increased test pressure : 18,0 bar Water content at NW approx. : 748 l Water content full approx. : 1,108 l Year of construction : 1994 equipped with Weishaupt gas burner G5 1-D, ZMD, 175-940 kW, gas control system, feed water pump, switch cabinet and the existing coarse and fine fittings.

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive Ibjdpstiy Ntefx Ah Hod 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: used, Year of construction: 2016, Overview  This isobaric triblock bottling machine was manufactured in 2016 by the Italian company Rizzolio. It is designed for the bottling of carbonated beverages and combines rinsing, filling, and capping in one compact unit. The machine is still installed, can be connected to demonstrate basic functionality, and is available for sale due to the owner's need for a larger brewhouse. Technical data  Capacity: approx. 500–650 bph (bottles per hour) Formats: Bottle diameter: 30 to 120 mm Bottle height: 140 to 350 mm Caps: 26 or 29 mm crown caps Filling Type: Counter-pressure / isobaric Rinsing heads: 4 Filling valves: 4 Capping unit: 1 Power: 0.75 kW Voltage: 240V, 50Hz, single phase Approx. dimensions Length: 1370–1410 mm Depth: 640 mm Height: 2100 mm Ibjdpfjwfh D Ijx Ah Hed

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Ibedpfx Aohz Ua Sjh Hed

Condition: ready for operation (used), Year of construction: 2005, SLITTING LINE MACHINE 4. SLITTING LINE - OME A/A DESCRIPTION CHARACTERISTICS 1 MATERIAL Coils Hot - Cold - Galvanize 2 THICKNESS Hot 1,5-5 mm Cold 1,25-3 mm Galvanize 1,25-4 mm 3 WIDTH COIL 500-1550 mm 4 MAX WEIGHT OF COIL PROCESSING 22τν 5 INTERNAL DIAMETER COIL 500-820 mm Decoiler type Double Cone 6 EXTERNAL DIAMETER COIL 1800 mm 7 INTERNAL STRIPE DIAMETER 508 mm Iedpfx Asvupk Aoh Hjbd 8 TOLERANCE OF STRIPE 0,2 mm 9 MIN STRIPE WIDTH 41 mm MAX STRIPE WIDTH 1490 mm 11 Number of Tearing / Width 1-2 mm 15 stripes 2-3 mm 9 stripes 4-5 mm 6 stripes 12 Minimum Trimming 1,25-3,85 mm => 10mm (2X5mm) 4-5 mm => 13mm (2X6,5mm)

Condition: used, Durchlaufdampferzeuger mit 23,1 kh/h Leistung: 35 kg/h Dampf Ibedpfswu A A Dox Ah Hjd Strom / Volt: 400 Leistung pro Stunde: 35 Zolltarif Nummer: 84022000

Condition: used, Year of construction: 1989, pressure 250 t stroke 20 - 190 mm no. of strokes 24 / 48 /min throat 500 mm passage to the back 1000 mm dayligth 615 mm table surface area 1400 x 880 mm hole in the table 450/500 mm table height over floor 800 mm ram surface 1380 x 620 mm ram adjustment 125 mm power requirement 29,0 kW Weight 27,0 t Ibjdpfx Ahovut Nce Hod dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse

Condition: used, Year of construction: 1993, pressure 160 t Ibjdpfxjtqm Dfs Ah Hed throat 400 mm stroke 20 - 160 mm table surface area 1200 x 800 mm ram adjustment 100 mm no. of strokes 60 Hub/min ram surface 860 x 520 mm total power requirement 15 kW weight of the machine ca. 16 t dimensions of the machine ca. 1,7 x 2,5 x 3,23 m - Additional clamping plate - cross-grooved - Foot switch - Hydraulic clutch - Hydraulic ball screw clamp - Hydraulic overload protection - Flywheel brake - Hydraulic system with oil cooler

Condition: like new (used), Year of construction: 2017, operating hours: 610 h, functionality: fully functional, Equipment: documentation/manual, Made of stainless steel, with a flat machine table plate, consisting of: 1) 12-STATION 2-PHASE MECHANICAL RINSER (WATER + AIR) 2) 12-STATION HIGH-PRESSURE ELECTROPNEUMATIC FILLER UP TO 8 BAR 3) SINGLE-HEAD CROWNCAPPER 4270 for crown caps 26 and 26 twist-off Monoblock equipped with: - CE-compliant safety enclosure with temperature-controlled glass doors - Universal screw conveyor Ibjdpfx Ajw Uk Nwsh Hod - Motor-driven adjustable side guides - Dummy bottles for manual positioning for rinser sterilization - Dummy bottles for manual positioning for filler sterilization - Set of solenoid valves for washing cycle - PLC and TOUCH SCREEN control panel - Electric height adjustment for all stations - Closure presence detection - Bottle rinsing unit at the machine outlet Machine without redirecting head but with drive head and packing station Various format parts as per data sheet Machine in very good condition and complete service before delivery. Capping column can be optionally equipped with a screw capper on request.