Flame-cutting machine

FICEP TIPO B251

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Nljdsgbfaxspfx Ac Aeg Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Year of construction: 2004, condition: good (used), Build in 2004 Description/configuration: Complete line for automatic pallet strapping, automatic stretch-wrapping of pallets. Includes fully automated pallet conveying. Line with ""straight""-configuration, built with chain conveyors and configured as follows: > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.01 > pallet strapper Cyklop XZE-3111, REF 25778.30 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.02 > Straight chain conveyor underneath wrapper, motorized, travel is long side leading, l~2600 mm, REF 25778.03 > ring style pallet film wrapper Cyklop GL 2000, REF 25778.40 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04" Layout available max speed in pallets/h: 50 pallets/h Chain conveyor Pallet width of up to 800 mm Pallet length of up to 1200 mm max height full pallet (max passage height): ~1700 mm Height of pallet conveying (min=300mm): ~400 mm max weight full pallet: ~1500 kg Over all length equipment: ~8000 mm Over all width equipment: ~6000 mm Over all height equipment: ~3500 mm Input Power: ~15 kw (whole line) Voltage: 400 V, 3 Ph, 50 Hz Nljdpfx Aohrmlkoc Aog Air requirement: 6 bar Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1,5 hrs), Leipzig (~2hrs), Berlin (~2,5 hrs) Condition: cleaned & in working conditions Machine available: upon request

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) Nlodpfx Asu Dw I Esc Asg - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: new, Year of construction: 2025, TR series is a laser pipe cutting machine focusing on heavy pipe processing, the use of traditional horizontal bed, high bearing capacity, with mobile gantry structure, can cope with a variety of complex cutting conditions, widely used in building beams, pipeline processing, steel structure industry. Big tube and profile laser cutting machine. Up to diameter H profile till 12 meter tube or profile lenght laser head depend on material thickness. Power: 3-12kW Max. Raw Material Length: 12500mm Round Tube Diameter: Φ70-Φ680mm Square Tube Side Length: □70*70-□480*480mm Max. Acceleration: 0.5G Price is EXW (Stock Europe), Include loaded on truck. Nsdpfx Asmxl S Aoc Ajlg Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Nlsdpfeihf Ufox Ac Aeg Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 13-13, The BLOMAX 4 Blowmoulding machine is of the model 13-13. The machine has no defects and operates in excellent condition with full functionality. Nljdpfot Akgwsx Ac Asg Power : 400V/150A/60000W Year of construction : 2000

Condition: excellent (used), functionality: fully functional, coil weight: 8 kg, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, total width: 1,250 mm, Slitting line for sale Nlodpfxov Twi Rs Ac Asg

Condition: new, 1 brand new universal milling head in standard or extended version for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, system "HURON", swiveling over 2 levels, every angle adjustable Mounting: ISO 40 Overhang: approx. 360 mm Designed drive power: 10 HP Max. speed: 1,800 rpm Weight in standard version: approx. 82 kg Accessories / Special Features: • Manual tool clamping • The main spindle and all shafts and engagements are made of case-hardened and tempered chrome-nickel steel • 2 axes that can rotate relative to each other, allowing every setting angle! System „HURON“ • Tapered engagements are ground according to the „KLINGELNBERG“ system • The roller bearings of the main spindle consist of tapered high-precision rollers • 1 tool clamping screw Delivery time: approx. 12-14 weeks after order receipt Njdpfx Aodbny Eoc Aolg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, Description BAISON V52U(12+12 meters): (12 or 20 kW) FOUR-CHUCKS HEAVY-DUTY TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND UNLOADING SYSTEM 12 meters automatic loading system + 12 meters automatic unloading system (can be equipped in different configurations ex:12+6 meters) This machine is also for profile, tub and different shape. Tube size range: Round tube: φ50-φ500mm Square tube: □50*50-□500*500mm Channel Steel: 5#-50# Angle Iron: 200*200mm I-beam:10#-50# H-beam:100*100mm-500*500mm Laser Power 12.000 W (Raycus) Max. Single Tube Weight 2.000 kg Claw Stroke Full stroke Min. Tail Length 0 mm Max. chuck speed 40 r/min Nodpfx Acevcbw Ds Ajlg Max Speed 50 m/min Max Acceleration 0.4 G Max. Tube Cutting Length 12.000 mm Ultra-short Tail Material 0 mm X-axis 500 mm Y-axis 12.000 mm Z-axis 500 mm Positioning Accuracy (X/Y) ±0.05 mm/m Repeated Positioning Accuracy (X/Y) ±0.05 mm Power Data 130kw / 225A Power supply 380V/50Hz/3Phases Power Protection Level IP54 Machine Size 29.080*5.000*3.250 mm Machine Weight 28.165 kg(Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 12 kW Laser head with automatic focus – RAYTOOLS BS12K-3D Controller system – FSCUT 5000A Automatic self-centering pneumatic chucks Semi-automatic loading system with chain Servo motors – VEICHI Reducer – TECHMECH High precision X/Y transmission mode with rack and rails – K.H Guide rail – SHAC Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Proportional valve – AVENTICS Welded and heat-treated machine bed – BAISON Wireless remote controller Computer with Windows 11 interface, Internet & WIFI Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Complete CE standard - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. Nlodpfx Acjh Hd A Sj Ajg The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING