Welding smoke suction

ESTA SRF P 10

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm space requirement: 3800 x 1950 x 1800 mm Nsdscblc Sopfx Aaascr Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Complete set including hand and double-foot remote control Digital speed display Hydraulic height adjustment Ncsdol Dq U Uepfx Aaaer Dimensions: Tilt height min: 800mm Tilt height max: 1900mm Horizontal height min: 1050mm Horizontal height max: 2000mm Clamping disc diameter 1500mm Length 2900mm, width 1400mm Weight 3200 kg Speed from 0.01 to approx. 0.9 rpm. CE certified

Condition: as good as new (ex-display), Year of construction: 2026, SRF master figure left 2 m suction arm Nedpfxjdqzbre Aaascr Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: Rexroth/Hydraudyne, hydraulic station with oil cooler / pressure accumulator / filter ... -Type: 03 HDJ -Engine power: 22 kW/1460 rpm Nodpfx Aajgz Irveajcr -Tank capacity: approx. 240 liters -Pressure display: up to 250 bar -Individual components: pressure accumulator/hydraulic tank/filter/valves see pictures -Number: 2 units available -Price: per piece -Dimensions: 1060/820/H1530 mm -Weight: 738 kg

Condition: new, Year of construction: 2025, ⭐⭐⭐⭐⭐ (5.0) ⚡ Top Service | Fast Delivery | Excellent Support ✈️ Delivery Time: Only 8 Weeks ✅ Energy Efficiency Class A+++ ☀️ 2-Year Warranty Buy Directly from the Manufacturer – Benefit from Over 40 Years of Experience in Surface Coating Technology! 💶 Flexible Financing Options: Maintain liquidity with our attractive hire purchase, leasing, and warranty programs. Contact us today for details! 🌀 Mono Cyclone & Jet-Pulse Filter Unit for Large Powder Coating Systems Ideal for operations that require efficient powder recovery: Powder is collected beneath the mono cyclone, sifted through a mesh, and transferred to the color station via pneumatic pumps. From there, it is automatically fed back into the powder coating guns. ✔ Key Advantages: No need for an exhaust air duct Clean and convenient powder recovery process Compatible with all automatic powder coating booths Suitable for walk-in type booths as well Optional: Use the Jet-Pulse filter unit alone for an environmentally friendly, recovery-free setup 🔄 High-Efficiency Recycling Technology Only 4% material loss Nodpedy E A Sjfx Aaajcr Maximized powder reuse Fully compatible with Proton MA-RYC-PRO Color Station for optimized performance in automated systems 👉 More details available in our listings or on our website. 🎨 Color Options: Our standard color combinations: Yellow-White Anthracite-White Custom RAL colors are also available upon request – please note that additional charges apply. ✅ Your Benefits at a Glance: Fast delivery in 8 weeks Direct from the manufacturer Energy-efficient (A+++) Comprehensive warranty & support Flexible financing models State-of-the-art powder recovery system

Condition: new, Year of construction: 2025, functionality: fully functional, Double-sided opening cabin allows for sandblasting of large-size elements (e.g. engine block, motorcycle frame) without the need to rotate the object. Dust-free operation of the device is ensured by the use of peripheral seals, which allows the work to be performed in an environmentally friendly manner. The sandblasting hose is located at the bottom of the collecting container. The drain hole allows for a quick change of sandblasting material. The sandblaster is used for cleaning and treating various types of surfaces, e.g. removing rust, paints, deposits from metal surfaces, e.g. automotive parts, engines, fittings, housings, wheels, rims, etc. The abrasive can be, among others, quartz , silicon, glass beads, plastic sand, emery and other materials. TWO SEPARATE PRESSURE REGULATORS FOR EACH WORK STATION TWO CYCLONE EXTRACTIONS WITH DUST FILTERS ENSURING DUST-FREE WORKING Technical parameters Internal dimensions of the cabin 1150 x 1260 x 800 mm External dimensions 1800 x 1400 x1880 mm Working pressure 4 - 8 bar Capacity 1,200 L Abrasive (abrasive) corundum, glass abrasive, and sand Weight 196 kg Standard equipment 8 ceramic nozzles 15 removable visor films 2 industrial pistols 2 pairs of work gloves 2 cyclones 2 pressure regulators 2 foot controls Manufacturer: Cormak Nodpfxjv Aad As Aaaecr

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Coil dispenser for wire Lincoln Idealarc DC-600 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 600 Amps at 100%. Welding equipment: Idealarc DC600 220/380/440 3/50/60 Input voltage: 220/380/440V Input current: 116/67/58A Input Hertz: 50/60 Input phase: 3 Nsdpfju Afwlox Aaascr Input power: 220/380/440V/3/50/60 Output range: CV:70A/13V - 780A/44V DC:90A/24V - 780A/44V Rated output: 600A/44V/100%. 680A/44V/60%.

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Njdpfsxyllvox Aaascr Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: new, Year of construction: 2026, HOLZING RLA X3 VIBER Power 26.900 m3/h with sawdust screw feeder (rotary sluice, auger) Capacity ~ 26.900 m3/h Dimensions 1920x4685x6285mm Filter type 100% polyester, 5 microns Buffer tank capacity 8.53 m³ Filter size Ø160mm L:1680mm Number of filters 144 Filter area 123.84 m2 Filter thickness 1 mm Pressure chamber yes Ncedelk Dtnopfx Aaasr 0.75 kw worm reducer Rotary valve 0.75 sq 0.17 kw vibration motor Rotation speed 3000 rpm Power 40KM Number of turbines 2 Transport dimensions (length/width/height) 10/2.5/2.7 m Weight: extraction + 2 turbines 3100 kg

Condition: good (used), Year of construction: 2011, Mono pump, dosing pump, high pressure pump, water pump, screw pump, eccentric screw pump, hopper pump, eccentric spindle pump -Connection: DN80 -E-Motor: North 3.0 kW Ncjdpoffk Insfx Aaajr -Gearbox: Nord SK25-100LA/4 TF -Speed: 105 rpm -Price: per piece -Quantity: 3 pieces -Dimensions: 1810/200/H300 mm -Weight: 107 kg/piece