Engel VICTORY 330/80 Tech

Engel VICTORY 330/80 Tech

Condition: excellent (used), Year of construction: 2004, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2004 Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Bedpfexg H Hbex Afmjlp Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Spritzteilgewicht 34 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: excellent (used), Year of construction: 2003, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2003 Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Bedoxgi Etopfx Afmjlp Spritzteilgewicht 34 g/PS Steuerung: CC100 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: excellent (used), Year of construction: 2009, operating hours: 41,750 h, functionality: fully functional, clamping force: 2,800 kN, screw diameter: 55 mm, displacement volume: 404 cm³, Equipment: documentation/manual, Model: Engel Speed 280/55 Year: 2009 Screw diameter: 50 mm Injection volume: 404 ccm Screw speed: 340 rpm Injection rate: 1901 ccm/s Spec. injection pressure: 1390 bar Spec. injection pressure increased: 2025 bar Nozzle stroke: 465 mm Blsdpfsyzhy Ujx Afmep Clamping type: Toggle Working hours: approx. 41,750 h

Condition: excellent (used), Year of construction: 2007, operating hours: 38,500 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/50 TECH Baujahr: 2007 Schließkraft: 50 Tonnen Holmabstand: HOLMLOS Blsdpsz Nxiljfx Afmsp Schnecken DN: 30 mm Spritzteilgewicht 70 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug hydraulisch

Condition: like new (used), Year of construction: 2019, clamping force: 500 kN, Equipment: documentation/manual, _ENGEL – Injection Moulding Machine Technical Data_ Serial number: 232665 Model: E‑VICTORY _Plasticising Unit 1_ • Screw diameter: 18 mm • Listed diameter options: 15 / 18 / 20 mm; 18 mm is installed • Screw stroke: 80 mm • Maximum injection volume: 20 cm³ • Screw speed: 450 rpm • Screw torque: 75 Nm • Plasticising rate, 3-zone screw: 4.2 g/s _Injection Unit 1_ • Version: Standard • Injection rate: 83.97 cm³/s • Specific injection pressure, regenerative mode: 2,400 bar _Nozzle 1_ • Nozzle stroke: 210 mm • Nozzle contact force: 40.6 kN _Material Cylinder 1_ • Screw L/D ratio: 24 • Heating zones, including nozzle: 4 • Heating power: 5.1 kW • Note: maximum available equipment _Clamping Unit_ • Clamping force: 500 kN (approximately 50 tonnes) • Opening stroke + cylinder tolerance: 408 mm • Maximum distance between platens: 600 mm • Minimum mould height: 200 mm • Platen dimensions, horizontal × vertical: 500 × 450 mm • Drop-out chute width: 400 mm • Maximum mould weight on moving platen: 300 kg • Maximum mould weight on stationary platen: 300 kg • Maximum total mould weight: 600 kg • Dry-cycle stroke according to Euromap 6: 150 mm • Dry-cycle time according to Euromap 6: 1.60 s Mould weight notes: 1. Mould overhang according to mounting platens. 2. Less the weight of any rotary table. _Ejector 1_ Bedpfx Afsz Iyldjmslp • Ejector stroke: 100 mm • Ejector force: 39.8 kN _Drive Unit_ • Oil reservoir capacity – injection unit, main tank: 135 l • Oil reservoir capacity – clamping unit, auxiliary tank: 0 l _Machine Basics_ • Total weight without oil: 4.0 tonnes • Total connected power: 65.0 kW Transcription note: the small footnotes below the plasticising section specify reference materials and test conditions. They are not fully legible in this photo.

Condition: excellent (used), Year of construction: 2013, Engel Victory 80/50 Spex with sprue picker Engel ER-USP5 / Hybrid machine Year of manufacture: 2013 Injection unit: Screw diameter: 18 mm Injection weight: approx. 22 g Injection pressure: 2200 bar Dosing volume: 25 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 0x0 mm Size of clamping plates: 500x450 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Bsdpoz Iqn Nsfx Afmslp Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 2 Control system with hot runner system x 6 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving It is possible to change the screw diameter to 22 or 25 mm Purchase of the sprue picker at an additional cost Dimensions: Weight: 2900 kg Length/Width/Height: 3.30x1.60x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request