Star screen

Doppstadt Sternsieb HS 1600 - Magnetrolle

Condition: new, mileage: 100 km, power: 390 kW (530.25 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 44,000 kg, color: yellow, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, Available immediately!!! Specially designed recovery boom with lifting fork for recovery and towing of damaged vehicles, trucks, tractor units, buses, trailers, etc. Fully hydraulic system. 3rd coat HDRV paint (STANDARD) Toolboxes (internal): yellow RAL 1032 Fpedpfx Aopl Avdsfnoc Toolboxes (external): yellow RAL 1032 Lifting fork: black, U-TEXT RAL 9005 Recovery boom: black, U-TEXT RAL 9005 Rear stabilizers: black, U-TEXT RAL 9005 Counterweight (front, under cab, if applicable): black, U-TEXT RAL 9005, smooth front chassis (STANDARD) - Hot-dip galvanized - For installation of front counterweight - Rear part painted in superstructure color (STANDARD) - Lifting angle 40° (Illustration HDRV 1013) - Mounting plates for main and auxiliary winches - Shackles 2x15000kg - Left and right side on the rear part of the arm - Space for spare wheel holder on recovery boom. 6. Lifting fork (STANDARD) - Position range relative to horizontal axis: -5° / +10° - Load capacity retracted: 20,000 kg - Load capacity extended: 10,000 kg - Extension: 3,800 mm - Range up to hydraulic rear stabilizers (STANDARD) - Independently controlled - Maximum width: 3,000 mm - Rotating stabilizers for asphalt work and hydraulically extendable beam, No HDRV 1013 Single extension: 0 - 3,000 mm Maximum payload: 2,000 kg – tank storage behind cab - Relocation of air tank behind cab - Relocation of battery behind cab - Relocation of AdBlue tank - Counterweight behind cab on front frame (weight 100 kg) - COME UP Bison 50 main winch, mounted on recovery boom, pulling force 22, - COME UP Bison 50 auxiliary winch, mounted on recovery boom, pulling force 22, - Hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - Hydraulic control block on right side (STANDARD) - Right side, rear quick couplings for brake system supply, transferred from chassis - Quick-release connector with 20-meter cable - Air pressure roller, on left side of superstructure, - Over rear axles electrical trailer socket + trailer coupling, from chassis - Jump-start aid 12V/24V, cable, lever, right side mounted - Jump-start aid 12V/24V, cable, lever, left side mounted - Camera + LCD monitor in cab - Camera for winches + LCD monitor in control box MONITOR: - Vibration resistance: 10G - Shock resistance: 100G - Operating temperature: -30 to +70°C - CE marking - EMC approval: includes emergency stop switch - Radio remote control – 1 function - Made from aluminum - Holders for tools and accessories - Floor with rubber mats - Small ladder - Auxiliary ladder in toolbox opening – doors - Guard rail on toolboxes – stainless steel - Aluminum platform, perforated, mounted on top of toolboxes - Stainless steel holders in large toolbox behind cab for forks, hooks, open - Toolbox edges with stainless steel profiles - Lighting package compliant with road traffic regulations - LED lighting in toolboxes - LED external lighting - GAMET DE LUX LED warning lightbar, 1,800 mm - Mounting of warning lightbar on upper part of superstructure - ORANGE BLITZ warning light, 2 pieces – front mounted - ORANGE BLITZ warning light, 2 pieces – rear mounted - ORANGE BLITZ warning light, 2 pieces – mounted at edge of last toolbox door - Switches for all auxiliary lights

Condition: used, Year of construction: 2018, operating hours: 6,031 h, functionality: fully functional, Basic Package SM620 Plus: Central axle trailer chassis with 2 axles, 80 km/h EU road approval Braking system including ABS and lighting according to EU directive Fpedpfoxx R Rhsx Afnsc 50 mm EU towing eye, incl. mounting shoe Hydraulically adjustable support legs at the front on both sides and rear right Splash protection (inner and side mudguards) Tyres 435/50 R19.5 Permissible total weight 19,000 kg Deutz diesel engine TCD 3.6 L4, 85 kW at 1,800 rpm, compliant with emission standard EUROMOT TIER IV Final Hydraulically reversible fan at water and oil cooler Complete engine unit can be swung out Fuel tank 300 litres Feed hopper 5.0 m³ capacity Stone grid preparation Hydraulically folding side conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulically folding rear conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulic support cylinder between side and rear conveyor Emergency stop switches at side and rear conveyors Load-dependent material feed from conveyor floor to screening drum Continuously variable screening drum speed from 0 - 20 rpm Continuously variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: emergency stop switch, folding/retracting the rear conveyor, folding/retracting the side conveyor, side conveyor inclination and load control +/-, automatic mode on/off From the operator panel: fold/unfold side conveyor Hydraulically folding cleaning brush with individual brush segments and spring tines Centrally arranged wear strips 24 V electric control Underrun protection rear Side collision guard front (reinforced version) and rear both sides Hydraulic quick coupling between rear conveyor and machine Acoustic start-up warning, door monitoring Doppstadt telematics system Paintwork: RAL2011 deep orange Basic version without screening drum Optional equipment: Flow divider on rear conveyor Delivery date by arrangement

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Fpsdpfx Afov Rpxlonec Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 44,000 kg, color: yellow, brakes: retarder, Year of construction: 2024, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Specially designed recovery arm with lifting eye for recovery, towing of damaged vehicles, trucks, tractor units, buses, trailers, etc. Full hydraulic system.3.Paint HDRV (STANDARD) IMMEDIATELY AVAILABLE STORAGE BOXES (inside): yellow RAL 1032 STORAGE BOXES (outside): yellow RAL 1032 LIFTING EYE: black, U-TEXT RAL 9005 RECOVERY ARM: black, U-TEXT RAL 9005 REAR SUPPORTS: black, U-TEXT RAL 9005 COUNTERWEIGHT (front, under cab, if applicable): black, U-TEXT RAL 9005, front smooth frame (STANDARD) - hot-dip galvanized - for mounting counterweight at the front - rear part in body color gearm (STANDARD) - lifting angle 40? (Fig. HDRV 1013) - Mounting plates for main and auxiliary cable winch - Shackle 2x15000kg - Left and right side in the rear part of the arm - Space for spare wheel holder on recovery arm.6.Lifting frame (STANDARD) - Range position with respect to horizontal axis -5° / +10° - Load capacity in retracted position 20000kg - Load capacity in extended position 10000 kg - Extension 3800mm - Range up to rear rafter supports (STANDARD) - Independently controlled - Maximum width -3000mm - Rotating supports for work on asphalt and rafter extendable beam No HDRV 1013 Single extension 0 - 3000mm Maximum payload 2000 - Storage of the tank behind the driver's cab - Relocation of the air tank behind Driver's cab - Battery relocation behind the driver's cab - AdBlue tank relocation - Counterweight behind the driver's cab on the front frame (weight 100kg) - Main cable winch COME UP Bison 50, mounted on the recovery arm, pulling force 22,5kg cable winch COME UP Bison 50, mounted on the recovery arm, pulling force 22,5kg hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - Hydraulic control block on the right side (STANDARD) - On the right side, in rear connections for supplying the braking systems, transferred from the chassis - Quick release with 20 meter cable - Air pressure roller, on the left side of the body, above rear axles Electrical plug connection for trailer + trailer coupling, from the chassis Belt aid 12V/24V, cable, lever, mounted on the right side - Jump start 12V/24V, cable, lever, mounted on the left side - Camera + LCD screen in Driver's cab - Camera above cable winches + LCD screen in control box SCREEN: ? Vibration resistance: 10G ? Impact resistance: 100G ? Working temperature: -30 to + 70 ° C ? CE marking ? EMC approval: activation of emergency stop switch - Radio remote control - 1 function - Made of aluminum - Holder for tools and accessories - Floor with rubber mats Fedpfeiuwl Sox Afnepc - Small ladder - Auxiliary ladder in box opening - Doors - Railings on storage boxes - Stainless steel - Aluminum platform, perforated, mounted on the upper part of the storage boxes - Stainless steel holder in large storage box, behind the driver's cab, for fork, hook, open storage box edges with stainless steel profile in storage box lighting package complies with the road traffic regulations - LED lighting in storage boxes - LED lighting, outside - LED light warning bar GAMET DE LUX, 1800mm - Mounting of the light warning bar on the upper part of the body - Warning light ORANGE BLTZ, 2 pieces - front mounting - Warning light ORANGE BLTZ, 2 pieces - mounting on the rear - Warning light ORANGE BLTZ, 2 pieces - mounting on the edge of the last storage box door - switch for all spotlights on

Year of construction: 2025, condition: new, machine/vehicle number: Neumaschine auf Bestellung, Description: - Screen deck system consisting of 1 deck for screening minerals from pre-crushed material Input grain size max.: 0-100 mm - Screen cut grain size 0-30 mm - Capacity approx. 60 m³/h (depending on material) - Material is separated into 2 fractions 0-30 mm and oversize grain - To be mounted on the customer's own impact walls or base frame Fpodpfx Afed Rbmkonec Technical data:  Screen deck: length = 3,120 mm; width = 1,400 mm o External dimensions: length = 3,300 mm width = 2,050 mm o Screen area 4.6 m², number of shafts 24 pieces o Drive 2 x 4.0 kW geared motors o Screen body polyurethane (star screen) D 166 / 12 fingers o Screen shafts as plug-in system (easy and cost-effective adaptation to other grain sizes possible) o External lubrication of the bearings, optional central lubrication possible for an extra charge  Color: black RAL 9017 / green RAL 6018 or according to customer specification ( against surcharge) Delivery time_ approx. 20 weeks

Year of construction: 2022, operating hours: 0 h, condition: new, Mobile cleaning centrifuge including buffer storage for dirty water, agitator and double membrane compressed air pump. - new machine - numerous other variants and special designs on request Fpedpfx Afsf Sqfqonsc Machine type: Process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: vibratory finishing technology, general solid-liquid separation, cooling lubricant processing, wet blasting systems, ... Benefits: - High discharge through acceleration forces acting in the system of over 1800 times the acceleration of gravity - Management of the process water in a circuit, which minimizes operating costs and protects the environment - Saving of expensive additives for the vibratory grinding process (compound) - Economical and efficient separation of solid particles from a mixture - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70 ° C (optional cooling available) - frequency-controlled motor drive for smooth acceleration and braking of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the field of vibratory grinding, drying and process water technology, which are precisely tailored to your application. From development to production: We deliver all of our products from a single source and everything is "Made in Germany". ----- Please just contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Year of construction: 2018, condition: new, Permanent overband magnetic separator TYPE PEM2200 2200 x 1000 x 400mm Fsdpfod Dy S Dex Afnspc ===== 4x eyebolt for suspension Rubber band GB30 Magnetic dimensions: 1200x500mm

Condition: used, Year of construction: 2017, operating hours: 6,777 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Fsdpfexx Tfzox Afnopc Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: used, Year of construction: 2004, WE HAVE 24 OF THESE SHREDDERS CAN DO A PACKAGE PRICE FOR MULTIPLE PURCHASES Type: EH 400/1 Serial number: 901 Year of manufacture: 2004 Fodpfexapr Hjx Afnspc Voltage/frequency: 400 V/50 Hz Rated power: 3 kW Boc Hpyfijw Niuho Dewt CE certified: Yes 🛠️ Description of the device Industrial shredder or crusher (shredder/granulator). Notable features in the pictures: System with rotating blades (shredding unit) on a 2 mm shaft 3 kW SEW motor and reduction gear 8 mm screen (the screen is marked ‘8 mm screen’) – indicates the size of the output particles Rollable, transportable design Material discharge container and lower motor system Machines of this type are generally used to shred the following materials: Plastic Rubber Wood Light metal shavings Electronic scrap

Year of construction: 2004, condition: good (used), Manufacturer: Hein Lehmann Type: LF 2,0 – 6,30 / 30 ED Size: 2.000mm x 6.300 mm Decks: 1 Year of Manufacture: 2004 Fpodpfxeh Ty Tqe Afnjc With Frame.