Screen deck

Doppstadt Selector 800

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Kdsdpfxowka S Is Ampek Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced Kjdpfxsxrtt Ej Ampedk The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.

Condition: used, Year of construction: 1989, functionality: fully functional, Used dip installation, manufacturer Bachhäubl HS2 12.5 - 12.50 m long x 1.50 m wide x 1.50 m high, clear internal dimensions; - Year of manufacture: 1989; Kdedpfex Aktwjx Ampek - Control unit with timer relay for setting immersion time. - Wooden support with frame approx. 7 m long, hold-down device with 7 prongs, approx. 7 m long; - Basin interior in good condition, - single-walled, without collection tray! - Weight approx. 8.5 tons - Transport dimensions approx. 13.00 x 2.35 x 2.80 m - Installation is supplied without impregnation agent and without sludge, - free loaded on truck!

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 920 h, ✅ Operator training is included at your site. ✅ The first owner was extremely satisfied with the innocrush crushing plant, particularly with its performance and ease of operation. However, due to a realignment of his business model, he no longer requires a mobile crusher. ✅ innocrush ic35 impact crusher with innoscreen is2 screening plant with recirculation/conveyor belt Kdjdpfxjwdxhhs Ampek * Year of manufacture: 2020 * Operating hours: 920 * Condition: Very well maintained, ready for immediate use * Inspection: On site, demonstration of the plant possible ✅ Technical Specifications * Throughput capacity: up to 400 t/h * Feed opening: 1,250 x 710 mm * Transport dimensions (L x W x H): without screening plant & recirculation belt: 11.95 x 2.5 x 3.2 m with screening plant / recirculation belt (RFB): 14.5 x 2.95 x 3.2 m * Crusher weight: 34 t * Total weight incl. screen & recirculation belt: 38 t * Transport: Plant can also be transported in separate units (e.g. crusher + screening plant/RFB) --- ✅ Special Features * Crawler-mounted → flexible deployment directly on site * Compact transport dimensions * Robust technology – ideal for construction debris, natural stone, and recycling applications * With screening plant and recirculation belt (integrated & included in weight) * Very good overall condition * Regularly serviced * Windsifter (retrofit possible) --- ✅ Location & Inspection The plant is located near Frankfurt and can be viewed in operation by appointment at any time. ✅ Price & Contact Price on request. If interested, please send us a message or call us directly.

Condition: new, Year of construction: 2025, machine/vehicle number: 732335740, Mobile jaw crusher on crawler track Kjdpfjhd I Sxsx Ampsdk Diablo crusher is the most modern machine in the category with 30 tons. It is equipped with the latest control and operation systems of the latest generation, it is simple and user-friendly, and environmentally friendly to boot. The HCS (Hydraulic Crushing System) control system actively supports the automatic operation of the machine, guarantees the highest profitability in terms of maintenance costs and productivity, making it incomparable. The structural reinforcement between the frame and the crusher gives the machine maximum robustness to to stresses and strains. The particular design of the supporting structure guarantees excellent access to all parts of the machine during maintenance operations. Production capacity: approx. 220 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction of fuel consumption by approx. 30%. Pre-screening optional gap size hydraulically adjustable also during crushing operation fast blocking system with wedges and folding cylinders unloading height 3000 mm dust extraction system tank pump magnetic separator warranty 1 year to max. operating hours from the start of operation of the equipment Technical data: Jaw crusher 1000 x 600 mm crushing gap from 40 to 170 mm Feed hopper 4m³ - 1820 x 3700 mm Grizzly feeder version 900 x 3300 mm Main conveyor belt 800 x 9600 mm 4 cylinder constant speed diesel engine 82 HP/60 KW, exhaust stage V Control panel Chain drive 400 x 2920 mm Weight: kg transport length 12500 mm Transport width:2530 mm Transport height 3150 mm Further information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: ready for operation (used), machine/vehicle number: 03890317, Machine number: 03890317 // See pictures for condition and details Kdjdpst A A Aqofx Ampek

Condition: new, Klanke Supercut roll splitter for efficient shredding of reject rolls. Features: -Automatic safety lock -Emergency stop rip cord Kdsdpfx Amon I Rgpepok -Siemens SPS Technical data: Blade length: 3000mm Cutting channel opening: 1200mm Motor power: 15kW Cutting force: 50to Order goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: used, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW Kdodpfx Astqd Ndjmpok ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: excellent (used), the plant is consisting of: - 2 chain separators Kdedolxzl Ejpfx Ampok - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts - 2 double-shaft extruders connected in parallel - 1 double shaft mixers - container for liquid extracts, etc.

Condition: used, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transportation and assembly Subject to errors in the description and price Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Kodpfx Ameu Agh Sjpjdk Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location