Used Grinding machines centerless for sale (78)

Condition: used, Year of construction: 1981, grinding diameter max. 100 mm Dqpif2 grinding length 180 mm grinding wheel diameter 400 mm grinding wheel width 180 mm In our opinion, the machine is in good used condition and can be viewed under power by appointment. There are 4 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2014, machine/vehicle number: 5368, grinding diameter max.:3-220 mm regulating wheel width:500 mm max. width of grinding wheel:500 mm weight of the machine ca.:16 t. dimensions of the machine ca.:12 x 10 x 8 m. grinding wheel diam. min/max.:420-610 grinding wheel diameter - width-internal grin:304,8 x 500 mm Regulatin wheel diameter min/max.:300-350 mm The machine is currently designed for plunge grinding JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Dplk8R Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls.

Condition: good (used), Centerless grinding machine manufacturer Herminghausen, type SRPIOO Dqq2M7

Condition: refurbished (used), CN Centerless grinding machine ROSSI MONZA 1500 CN currently being overhauled and fully electrically/electronically retrofitted Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing Grinding wheel 350 mm * 610 mm dia This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed through the rectification gap. 8Ywwa9Ayxo Grinding wheel width: 350 Grinding wheel diameter: 600 CNC: Siemens

Condition: good (used), Year of construction: 2011, operating hours: 11,542 h, Functionality: fully functional, machine/vehicle number: 5306, grinding wheel width: 250 mm, grinding wheel diameter: 500 mm, total width: 25,000 mm, total length: 23,000 mm, grinding diameter: 100 mm, grinding length: 250 mm, overall weight: 5,600 kg, workpiece diameter (max.): 100 mm, power: 35 kW (47.59 HP), 4-lane feeding, fully automated Stereization Siemens CNC CNC dresser few operating hours C3Pzrr0J

Condition: good (used), maximum grinding diameter: 200 mm working grinding wheel - 508 x 305 x 254/280 mm rotational speed of the grinding wheel - 1240 rpm guide grinding wheel - 270 x 150 x 254/280 mm rotational speed of the grinding wheel: 15-250 rpm rotation angle of the guide grinding wheel spindle in the vertical plane: 0 ÷ 8° in the horizontal plane: ± 4° Dqlqej

Condition: excellent (used), Year of construction: 1988, needle diameter max. 85mm min0.85mm Grinding wheel width max. 150 mm Working range mm Speed ​​m/min45m/sec Total power requirement 22.5 kW Machine weight approx. 4,500 t Space requirement approx. m k O E N I G & B A U E R centerless cylindrical grinding machine for plunge grinding Type M 150 - Year of construction approx. 1988 700907 _____ max. workpiece length for plunge cutting approx. 200 mm Grinding wheel size: Diameter x width max. 400 x 150 mm Control wheel dimensions: diam. x width max. 300 x 200 mm Grinding wheel speeds max. rpm resp. 45 m/sec Steer wheel speeds infinitely variable 10 140 / 230 rpm Inclination of the control wheel +3 / -5 degrees Battle of the two hydr. dressing slides approx. 200 mm Grinding wheel drive approx. 22 kW Total drive approx. 22.5 kW - 400 V 50 Hz Cxaygqblg7 Weight approx. 4,500 kg Accessories / special equipment The machine is a centerless grinding machine specially equipped for plunge grinding of cylindrical workpieces by hand See also our other advertisement multimat 250 transit machine

Condition: new, Year of construction: 2024, Workpiece diameter 1 - 300 mm, diam. grinding wheel max 725 mm, SS width 300-380 mm, weight basic machine approx. 13,5 to, drive power max. 100 kW. Centerless grinding machine for through-feed and plunge-cut grinding, fixed grinding center, grinding wheel diam. 725 mm for highest lifetime and productivity, especially with conventional grinding wheels, hydrostatic grinding wheels, hydrostatic guideways for highest accuracy for grinding and regulating slides, Direct drive via servo motors for grinding and regulating slides, dresser with separate slide for copying ruler and servo contour, height adjustment of the guide rail via servo motor, thus easy and quick changeover possible. 9Kriwozo3

Condition: ready for operation (used), Year of construction: 1983, Functionality: fully functional, machine/vehicle number: 74.976, grinding wheel width: 50 mm, grinding wheel diameter: 400 mm, grinding diameter: 35 mm, rotational speed (max.): 1,450 rpm, rotational speed (min.): 2,850 rpm, grinding wheel speed: 35 rpm, overall weight: 3,100 kg, outer dimension length: 2,000 mm, outer dimension width: 1,600 mm, nominal power: 2.1 kW (2.86 HP), power: 11 kW (14.96 HP), type of cooling: water, Equipment: rotational speed infinitely variable, We are selling this machine for space reasons and due to an upcoming move to a new factory building. The machine is technically ready for use and with workpiece feed, coolant device and belt filter system. Ckf8Wh0Xug The original operating instructions are available. The machine can be inspected at any time and is under power.

Condition: excellent (used), Year of construction: 2015, operating hours: 23,369 h, Mikrosa centerless external cylindrical grinding machine With automation Siemen control Dimensions of the measuring machine: Length: 1,55m Width: 1.50m Height: 2.90m Bei2Vzm

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 5064, Please let us know your asking price. Sale only within Europe, incl. Turkey Robot is not scope of supply - Robot not scope of supply Nkwnpc9 Technical data see hand out Without packaging; any warranty rights are excluded. Should you wish to dismantle the system yourself, please inform us accordingly in your bid For the correctness of the technical data, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.

Condition: good (used), maximum grinding diameter: 200 mm working grinding wheel - 508 x 305 x 254/280 mm Cklctoqrlg rotational speed of the grinding wheel - 1240 rpm guide grinding wheel - 270 x 150 x 254/280 mm rotational speed of the grinding wheel: 15-250 rpm rotation angle of the guide grinding wheel spindle in the vertical plane: 0 ÷ 8° in the horizontal plane: ± 4°

Condition: like new (used), Year of construction: 1990, Multimat 250 in excellent condition. Svalx Sharpening stone spindle made for 40M/s with 600mm stone Automatic dressing. Control disc 300mm continuously adjustable Max Ø100mm /Min Ø2mm main engine 22Kw ll original papers are included Electronics work perfectly The machine is powered and can be seen working

Condition: excellent (used), AGATHON 150 SL2 Centerless cylindrical grinding machine TECHNICAL DATA Working wheel: Diameter: 150 mm width: 50 mm Bore: 50 mm Regulating disk: Diameter: 100 mm Width: 50 mm Bore: 40 mm Workpiece diameter: Minimum: 0.1 mm Maximum: 12 mm Max. Length for plunge-cut grinding: 49 mm Weight: 750 kg Connected loads: 3 X 380 V / 50 Hz Compressed air: 5-6 bar Dimensions: Machine: 1000 x 500 x 880 mm Electrical cabinet: 1550 x 540 x 420 mm Coolant tank: 750 x 550 x 700 SCOPE OF OFFER U.A: (list not exhaustive): Grinding wheels regulating wheels Spare flange mandrel Hu07Hxw Grinding pads Complete operating documentation Exact scope of offer according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided.

Condition: repair required (used), Year of construction: 1975, Functionality: limited functionality, machine/vehicle number: 16.42-37-23, grinding wheel width: 200 mm, workpiece weight (max.): 5,000 kg, grinding wheel diameter: 250 mm, Machine is old but still able to run production, if you need more insight information do not hesitate to contact us Uq3Surobgz

Condition: used, grinding diameter - min. 0,5 mm grinding diameter max. 125 mm max. dia. of grinding wheel 406 mm max. width of grinding wheel 254 mm regulating wheel width 254 mm Bsnd0Q2Nwhw turning speed range - drive spindle max. 1900 U/min regulating wheel turning speeds 0 - 150 U/min total power requirement 18 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 3,3 x 2,2 x 1,8 m Grinding disc ø406 x 254 x ø229mm Regulating disc ø280 x 254 x ø165mm in accessories New grinding disc New regulating disc with vibratory feeder

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 5041, Please let us know your asking price. Sale only within Europe, incl. Turkey Robot is not scope of supply - Robot not scope of supply Technical data see hand out Without packaging; any warranty rights are excluded. Should you wish to dismantle the system yourself, please inform us accordingly in your bid For the correctness of the technical data, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. Bsfl2Vcfpbg

Condition: used, Centerless grinding machine ROSSI MONZA 400 Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap. Grinding wheel width: 200 Brtaycz9Zre Grinding wheel diameter: 400

Condition: good (used), grinding diameter max. 300 - 350 mm regulating wheel width 20 - 110 mm max. width of grinding wheel 110 mm Gxc0B7U turning speeds 1400 U/min total power requirement kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,6 x 1,2 x 1,8 m

Condition: good (used), ESTARTA 312 Centerless cylindrical grinding machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Workpiece, diameter: 1-5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0-1 mm Work feed: Stepless Bmffairqmu3 Speed, grinding wheel: 1300 rpm Weight: approx. 4000 kg Dimensions: 1.5 x 0.4 x 2.0 m SCOPE OF OFFER Including: (non-exhaustive list): Grinding wheel (mounted), regulating wheels (mounted), grinding pads, complete operating documentation. Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: new, With a capacity from 1 to 25mm with a standard workrest or 25 to 40mm with a special workrest, and a servo controlled regulating wheel, the JHC 12S is the most compact centreless grinder in the range. A precision ground, the hydrostatic bearing assembly provides minimal friction and lateral displacement, along with extended wheel life under heavy grinding loads. The grinding wheel spindle runs on the hydrostatic bearings with an ultra-thin oil film between all touching surfaces. This provides a substantial reduction in wear and prolongs spindle trueness and longevity. The regulating wheel uses a Variable Speed Motor, controls the speed of the regulating wheel. Bcyhpkvitit Specification Europa Jainnher JHC 12S Standard work rest diameter 1 - 25mm Optional work rest diameter 25 - 40mm Grinding wheel size : diameter x width x hole 305 x 150 x 120mm Regulating wheel size : diameter x width x hole 205 x 150 x 90mm Grinding wheel speed 1900 rpm Regulating wheel speed 10 - 300 rpm (variable speed) Grinding wheel motor 7.5 hp Regulating wheel motor 2 HP Hydraulic pump motor 1 HP Coolant pump motor 1 / 8 hp Regulating wheel feed on handwheel 4mm (rev) 0.02mm(Gra) Table feed on handwheel 7mm (rev) 0.05mm(Gra) Table micro feed on handwheel 0.2mm(rev) 0.001mm(Gra) Dressing handwheel 1.25mm (rev) 0.01mm (Gra) Regulating wheel tilt angle + 5 Deg -3 Deg Regulating wheel swivel angle +/- 5 Deg Floor space (approx) 1750 x 1350 x 1400 mm Net weight (approx) 1600 kgs Europa Jainnher JHC 12S Centreless Grinding Machine Standard Equipment Grinding wheel and grinding wheel flange Regulating wheel and regulating wheel flange Flange extractor Diamond tool Thrufeed standard workrest and blade Infeed standard workrest and blade Levelling screw and plate Tool box and tools Thrufeed process gauge Thrufeed safety device Work lamp

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m 9A8Afmf The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Various options possible (KM system, infeed/outfeed, workpiece rulers etc.)

Condition: refurbished (used), Year of construction: 2021, Centreless grinding machine GHIRINGHELLI M2150 CNC 4 axes grinding wheel 200x610 CNC 4 axes Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy) Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. Fhqmgn2Uo During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed through the rectification gap.

Condition: good (used), grinding diameter max. 1 - 100 mm regulating wheel width 180 mm max. width of grinding wheel 180 mm workpiece length - max. 300 mm turning speeds 9 - 425 U/min total power requirement 15 kW weight of the machine ca. 3,3 t Ukuss9Pcdj dimensions of the machine ca. 2,4 x 2,3 x 1,9 m

Condition: refurbished (used), Centerless grinding machine - centerless Ghiringhelli M100 CNC 1A 400x100mm wheel CN 1 axis plunge + through feed grinding The machine can be seen working in our warehouse in Gussago BS. Mimu(dot)com machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. Qjad2 The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed through the rectification gap.