Cut Tape BRENTA torso 1200

Cut Tape BRENTA torso 1200 Cut Tape BRENTA torso 1200

Condition: like new (used), Year of construction: 2019, operating hours: 180 h, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 1,300 mm, type of input current: AC, input voltage: 400 V, power: 10 kW (13.60 HP), SOEST Universal Surface Line for oiling, staining, lye treatment, patination, etc. Primarily intended for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two pad holders, and an additional two brushes, for distributing, working in, or patinating surface media in the pores and/or also for removing, distributing, and working in depending on the desired surface effects. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four replacement brushes, various distributor pads, and a pneumatic brush cleaning machine. Godpfxoyaiafo Ag Iobt This complete surface finishing line is built for professional industrial use and is configured with a full set of equipment. A considerable amount of accessories for the system, such as extra rollers and cleaning machines, is also included (see photos!). Very robust construction, all motors frequency-controlled (Siemens). Speeds are steplessly adjustable for both forward and reverse operation. Maximum workpiece width is approx. 410 mm. The system is in very good condition, with little use—only approx. 180 operating hours—so it can be described as as-new. This surface processing line was only used as a backup line in parquet production and only for specific surface techniques, which explains the low operating hours (used sporadically from 2019 to 2022). In 2023, our company downsized and the system has been stored ever since or is immediately available, and therefore remains in nearly brand-new condition! This system is no longer used in our facility and is therefore being sold. The new price for this line was approx. €87,000 in 2019; the current selling price is negotiable! Inspection of this surface line is possible by appointment. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video serves only as an example video of a similar system configuration!)

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Godpfox Tgr Tox Ag Iebt Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Four-sided planer / construction timber planer Gbsdpfx Aew Dn Uqsg Ist Maximum width: approx. 55 cm Maximum height: approx. 14 cm Immediately available Location: Austria, near Grieskirchen

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Gjdpfei E Trpox Ag Isbt

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm Gsdpfehlp D Nox Ag Iebt -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Gjdpfx Agefi Tg He Iobt Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: used, mileage: 19,950 km, first registration: 11/1989, fuel type: diesel, axle configuration: 4x4, gearing type: mechanical, Year of construction: 1989, Equipment: all wheel drive, Mercedes-Benz 1428 AF 4x4 (central and rear axle locks, low-range gearing) with 7 seats Water tank: 2,500 liters Gsdpsfarx Uofx Ag Iobt Pump: Metz, with a flow rate of 2,800 l/min Additional equipment: quick attack connection on the right side with a 50-meter hose Dimensions (LxWxH): 7100 x 2300 x 3000 mm Wheelbase: 3800 mm Tires: 275/70 R22.5

Year of construction: 1978, condition: used, pressure 100 t Gjdpolp U Dpsfx Ag Isbt throat 380 mm stroke 400 mm power capacity 22 kW dayligth 600 mm ram surface 600x500 mm table surface area 720x600 mm weight of the machine ca. 9 t

Year of construction: 2002, condition: used, Balpe SAS Gjdpjb Uanqsfx Ag Isbt model: 9PL/20 serial: 88 Stainless, 9 electrically heated angled plate with, 200mm diameter, adjustable temperature.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,450 mm, total height: 1,790 mm, total length: 3,470 mm, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. Gbedpfsyl Tr Nex Ag Ist Foudila deck nailing machine, DNM-153 is a compact, flexible, and efficient machinery for production of decks for pallet industry to an excellent price-performance ratio. Thanks to the machine’s high production speed, user-friendly design and board magazines with large buffer, it is well suited for manufacturing both standard and special products in small and large production series with only one operator. The machine is capable of producing over 1000 decks per work shift. The machine is equipped with three nailers with magazines for large nail coils. Each nailing pattern can include 1–3 nails and can also be clinched if needed. The boards are fed into magazines with a large buffer – three cassettes for stringer/under boards and one cassette for deck/upper boards. The machine is controlled and programmed via a modern and user-friendly software interface on a 10” touchscreen, using a Beckhoff control system. Thanks to the machine’s compact design, it requires a very small production footprint and makes installation fast and easy because the machine can be delivered fully assembled. The machine can of course be equipped with a conveyor for finished products, automatic stacker and automatic board feeder. These options can also be installed at a later stage, allowing for investment step-by-step. Please feel free to contact us for more information, technical specifications, and price details.