Used block heat and power plant for sale (36)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,613 h, functionality: fully functional, machine/vehicle number: B4/19-002/LV, total height: 2,591 mm, total length: 2,990 mm, total width: 2,438 mm, fuel: liquefied natural gas (LNG), overall weight: 5,000 kg, type of cooling: water, empty load weight: 4,900 kg, Equipment: documentation/manual, As part of the demonstration, the compression in all cylinders can be shown to be 15 bar. Electrical power – 50 kWe Thermal power – 80 kW Gas consumption – 14.6 Nm3/h Engine manufacturer – MWM Number of cylinders – 4 Generator manufacturer – Marelli Type – MJB 225 SA4 Power – 62.5 kVA Rated power – 50 kW Frequency – 50 Hz Gkelhcjz Rxgyecqljc Voltage – 400 V

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Gjlhcsz D Ihfscqlekc

Condition: like new (used), Year of construction: 2022, functionality: fully functional, fuel: liquefied natural gas (LNG), - 1x CHP unit - As new - Control cabinet still in original packaging - Located in Genthin Gslhezazraeccqljkc We are selling a CHP unit in as-new condition. It has never been used, and the control cabinet is still in its original packaging. It has never been used but has been regularly maintained and is fully functional. The CHP unit is located in Genthin and can be inspected at any time.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 40,000 h, functionality: fully functional, rotational speed (min.): 1,514 rpm, rotational speed (max.): 1,514 rpm, total height: 1,625 mm, total length: 2,427 mm, total width: 994 mm, overall weight: 1,800 kg, type of cooling: water, number of cylinders: 4, cubic capacity: 4,580 cm³, torque: 341 Nm, protection type (IP code): IP54, For sale are 4 x 2G G-Box 50 cogeneration units in a soundproof enclosure. The units are fully functional and have been regularly serviced throughout their operational period in accordance with the manufacturer's service protocol, using original spare parts. Details: Manufacturer: 2G Model: G-Box 50 Quantity: 4 units Design: soundproof enclosure Engine age: 10 years Gkeloz I Nakohccqljc Operating hours: approximately 40,000 hours Condition: fully functional and regularly serviced The set includes all necessary equipment for the operation of the cogeneration unit (CHP), including the electrical cabinet, control system, and all other required components. The units are ready for transport. Price: 10,000 EUR/unit

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. Gjlsz Hngmohccqlokc This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, Year of construction: 2016, operating hours: 32,318 h, functionality: unexamined, power: 30 kW (40.79 HP), Used Spanner HKA 30, year of manufacture 2016. Gslozbnklohccqljkc The unit was fully operational. It has already been dismantled and is ready for collection. 30 kW electric 73 kW thermal Operating hours: 32,318 Engine: GM 5.7L, non-turbo Includes complete control cabinet and numerous accessories.

Condition: used, Year of construction: 2009, power: 800 kW (1,087.70 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 11,700 kg, nominal power: 800 kW (1,087.70 HP), input frequency: 50 Hz, input current: 950 A, ambient temperature (max.): 30 °C, We are offering this used Jenbacher JMS 412 GS-N.TE combined heat and power (CHP) unit, manufactured in 2009. Type: JMS 412 GS-N.TE Serial number: 6289001 Year of manufacture: 2009 Rated power: 800 kW Power factor: 1 Maximum operating altitude: 150 m Maximum ambient temperature (intake air): 30 °C Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 950 A Weight: 11700 kg Gkelhccqjz Ehc Ejljc Performance class: G2 The unit was only operated at 555 kWh by the previous owner, but we used it at 800 kWh. According to the data sheet, it is designed for 800 kWh operation. We operated the unit with natural gas. We are selling the complete unit in a soundproof container, including the exhaust heat exchanger and chimney. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: MTU 12V4000 L33, type of input current: three-phase, total height: 5 mm, total length: 25 mm, total width: 3 mm, type of cooling: water, Equipment: documentation/manual, rotational speed infinitely variable, Plant assembled and NEVER put into operation Cogeneration Unit MTU 12V4000 L33 GAS GENERATOR SET Condition: New – 0 hours Enclosure: Enclosed container Rated electrical power: 1,262 kW Thermal power: 1,355 kW Electrical efficiency (cos φ = 1.0): 42.1% Thermal efficiency: 45.2% Total efficiency (full heat recovery): 87.3% Fuel consumption: • At 100% load: 299 Nm³/h • At 75% load: 232 Nm³/h • At 50% load: 167 Nm³/h Manufacturer: MTU – Centrica Business Solutions Srl Equipment designation: Type: E1265 250 Nox L33 Natural Gas CHP Unit Configuration: Containerized Rated current: 1,935 KVA Engine: Genset Rolls Royce MTU 12V4000L33 Number of cylinders: V12 Max engine power: 1,320 kW Generator: Stamford Model: PE734E-312 Type: Three-phase, synchronous, four-pole, brushless Rated voltage: 400 V Frequency: 50 Hz Dimensions (L x W x H): 12,800 / 2,700 / 2,900 mm Absorption Unit CARRIER 16LJ-F41 Condition: New – 0 hours Enclosure: Enclosed container Capacity: 1,178 kW Cooling System Flow rate: 56.4 L/sec Gkslhcsydqlqocqlec Pressure: 45 kPa Connection (DIN): 8” (inch) Volume: 0.48 m³ Heat Rejection System Flow rate: 93.1 L/sec Pressure: 117 kPa Connection (DIN): 10” (inch) Volume: 1.39 m³ Dimensions (L x H x W): 5,330 x 3,080 x 1,690 mm Weight: 13,700 kg Evaporative Cooling Towers: No. 2 Condition: New – 0 hours

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, type of input current: three-phase, power: 600 kW (815.77 HP), input voltage: 400 V, rotational speed (min.): 600 rpm, rotational speed (max.): 600 rpm, fuel: domestic gas H, overall weight: 25,000 kg, type of cooling: water, warranty duration: 1 months, nominal power: 630 kW (856.56 HP), input frequency: 50 Hz, Equipment: documentation/manual, We offer this ALC "DIESELMASH - CGU" DvGA-630 8CHN25/34 block-type gas cogeneration power plant in very good condition, manufactured in 2003. Manufacturer: ALC "DIESELMASH - CGU" Model: DvGA-630 8CHN25/34 Year of manufacture: 2003 Goljzlwi Dshccqljkc If you have any questions or need more information, please send us a message or call us.

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, total height: 2,600 mm, total length: 12,200 mm, total width: 2,500 mm, overall weight: 13,000 kg, Combined Heat and Power Plant (CHP), Manufacturer: STIEGELE, housed in soundproof special containers, 800 kVA Manufacturer: Stiegele Year of manufacture: 2007 Operating hours: approx. 12,000 per engine Engines: Make: 2 x Scania DC 12-54, Variant A03P Engine speed approx. 1,500 rpm each Electric drive: EMK type KS160L-4-PTC Feed pump: Elektra type DD0705 Mode of operation: Palm oil (primary), Diesel / Heating oil. The CHP was designed for operation with vegetable oil (palm oil) and has been converted accordingly. For continuous operation with heating oil or diesel, technical modifications may be required. Generators: Make: 2x Marelli Type: MJB315MA4 Output: 880 kVA Touch control: Manufacturer Woodward, Type GCP-30 Gkolhccjy Iu Hnsqlec Dimensions (per container): Length: approx. 12,200 mm Width: approx. 2,500 mm Height: approx. 2,600 mm Weight: approx. 13,000 kg The CHP system is modularly installed in two 40" soundproof containers and has been out of operation for some time. The sale includes the containers, control system, and heating oil tank. Viewing and inspection of the system is expressly encouraged. Sale exclusively to commercial customers. Any and all liability for material defects and warranties is excluded. The machine is sold used and as inspected, with no guarantee or assurance of specific properties. Claims for damages are only possible in cases of intent, gross negligence, or injury to life, body, or health.

Condition: new, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, We are offering two new Totem 20 combined heat and power (CHP) units, as well as a new Totem 10 CHP unit, manufactured in 2016. These CHP units are from a warehouse clearance. According to the previous owner, the units are eligible for CHP subsidies, as they have never been installed. However, this must be verified independently. The TOTEM 20 generates a maximum of 20 kW of electricity and 48.5 kW of heat. The TOTEM 10 generates a maximum of 10 kW of electricity and 25.2 kW of heat. Gkslhccsytympsqljc Please refer to the uploaded data sheet and operating manual for all other technical specifications. Depending on the location, the CHP units can also be delivered to Germany or Austria. The price for the Totem 10 is €6,000. The price for the Totem 20 is €7,000. The current list price for a new Totem 20 is approximately €57,000 gross, and they are being sold for around €45,000 (see photo). If you have any questions or require further information, please send us a message or call us. We offer a start-up guarantee in the form of a return policy in case of any issues, but we will not cover any costs incurred.

Condition: used, Year of construction: 2015, operating hours: 50,000 h, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 60,000 rpm, fuel: domestic gas H, type of cooling: air, nominal power (apparent): 999 kVA, input frequency: 50 Hz, input current: 1,444 A, Equipment: documentation/manual, Used natural gas-fired combined heat and power plant for electricity and industrial steam production. Main equipment: • Capstone C1000: five C200 microturbine modules, each rated at 200 kW; electrical output of the complete package: 999 kWe; 400 V / 50 Hz; grid-parallel operation; common acoustic enclosure and control system. • APROVIS waste heat steam boiler: rated production of 2,000 kg/h of saturated steam at 6 bar(g); maximum allowable pressure 9 bar(g); equipped with two economizer stages for heat recovery. • Reinhard Simon CKO501G supplementary duct burner: 500 kW, for additional exhaust gas heating upstream of the boiler. • BIO-KOMP fuel gas booster compressor: 30 kW, maximum flow 340 Nm³/h, discharge pressure 6 bar(g). The plant has been regularly maintained under a maintenance contract, with components replaced in accordance with the maintenance schedule. One of the five turbine modules is currently non-operational. Operating hours: T1: 53,191 h; T2: 50,891 h; T3: 51,628 h; T4: 52,691 h; T5: 49,487 h. The pressure equipment has an inspection certificate issued by an accredited pressure equipment inspection body. Technical documentation is available. Inspection, price and collection terms are subject to agreement. Gslhccez I T Ekoqljkc

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), PRICE REDUCTION!!!! Like-new combined heat and power (CHP) units – 2 × WOLF Power Systems – 140 kW electrical each – unused For sale are two like-new CHP units from WOLF Power Systems, each with an electrical output of 140 kW. Gslheyt Emnsccqljkc The units have never been installed or put into operation and are therefore in technically unused condition. Since delivery approximately 5 years ago, they have been stored in a dry and protected environment. Technical specifications: Manufacturer: WOLF Power Systems Electrical output: 140 kW per unit Condition: unused / like new Storage: dry, professionally stored Availability: immediate The current new price is approximately €220,000 net per unit. This represents a very rare opportunity to acquire high-quality CHP technology at a significantly reduced price compared to the new price – ideal for commercial use, district heating projects, agriculture, or energy contracting. Inspection possible by arrangement. Asking price is half the new price; please submit your offer!

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS Gkelowd Nw Tjhccqloc CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Power: 1064 KW Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: Gslhcceytpbisqlekc - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Condition: used, Year of construction: 2006, operating hours: 5,126 h, functionality: unexamined, power: 3,500 kW (4,758.67 HP), overall weight: 43,200 kg, Complete oil-fat-fuelled cogeneration unit. ABC 16VDZC-1000 electric engine, AVK DIG150L-6 alternator. Complete system including supervisory management and all peripherals. The entire installation is still assembled as originally configured and can be inspected. Please contact via email. Gslhccoy Hiuqoqlokc

Condition: like new (used), Year of construction: 2015, functionality: fully functional, type of input current: three-phase, power: 45 kW (61.18 HP), input voltage: 400 V, For sale Spanner Biomass cogenerator station with 9 units. Model - BHKW45-8,0-V1.1 Year - 2015-2017 Nominal power - 6x45KW, 3X50KW Voltage - 400V Frequency - 50HZ Current - 3 phase Engine - 8.0L Gkelhsvcbtrsccqlec Price shown per unit. 1 unit includes: Biomass gasifier, generator that converts the gas with engine to electricity, separate control cabinets for gasifier and generator. Price is discussable. Please see attached documents. Preferred text communication via e-mail or whatsapp.

Condition: excellent (used), Year of construction: 2008, operating hours: 84,000 h, functionality: fully functional, power: 526 kW (715.16 HP), type of cooling: air, input frequency: 50 Hz, Jenbacher J312GS hours: 84,000 hours overhaul at 60,000 hours. Gjlhcozwpnpjcqljkc Year: 2008 Rated power: 526KW Frequency: 50HZ Very well looked after unit was installed in a hospital and serviced and maintained regularly.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 30160328026, power: 210 kW (285.52 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, nominal power: 210 kW (285.52 HP), This CHP unit comes from an investment that was never put into operation. Gkslhccsyzcxrjqljc

Condition: like new (used), Year of construction: 2020, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 1455607, fuel: liquid petroleum gas (LPG), Jenbacher JMS612 in a container Electrical output: 2004 kW Thermal output: 2244 kW First commissioning: November 30, 2020 Operating hours: 14,800 h Condition: Like new Gjlhjztw Naoccqlekc System is still in operation. Full maintenance contract was in place until recently. Includes flue gas cleaning system (suitable for horticulture).

Condition: used, Year of construction: 2007, operating hours: 66,031 h, functionality: fully functional, type of input current: three-phase, power: 800 kW (1,087.70 HP), input voltage: 400 V, type of cooling: water, input frequency: 50 Hz, input current: 80 A, MWM / Deutz TCG 2016 V16 CHP Unit – Approx. 800 kWe – Natural Gas For sale: complete MWM / Deutz TCG 2016 V16 CHP unit, year 2007, suitable for operation on natural gas. The unit has approximately 66,031 operating hours. The last major service was performed at approximately 48,000 operating hours. The CHP unit will only be sold after the engine overhaul has been completed. Gslhcsz E A Rwecqljkc Work included before delivery Prior to delivery, the following work will be carried out: - Complete overhaul of the MWM TCG 2016 V16 engine - Overhaul of the electric pumps - Cleaning of the exhaust gas cooler - Cleaning of the condenser The generator was tested while the unit was still in operation and was found to be in good working order. The unit is currently disconnected from the gas supply. The oil and cooling water have been drained in preparation for the overhaul, so the engine and complete CHP unit can no longer be demonstrated running in its current condition. Main specifications - Manufacturer: MWM / Deutz - Model: TCG 2016 V16 - Year: 2007 - Fuel: Natural gas - Electrical output: approx. 800 kWe - Generator: Marelli - Generator rating: 1,300 kVA - Grid frequency: 50 Hz - Control system: TEM Evolution - Operating hours: approx. 66,031 h - Last major service: approx. 48,000 h Scope of supply The unit is offered as a complete CHP package and includes: - MWM / Deutz TCG 2016 V16 gas engine - Marelli generator - TEM Evolution control system - Gas train - Generator switchgear - Heat recovery equipment - Exhaust gas cooler - Condenser - Associated installation components supplied with the unit The unit is suitable for grid-parallel operation and can also be prepared for island / stand-alone operation if required. Complete service and technical documentation A complete maintenance history is available, including: - Full service logbook - Maintenance records - Oil sample reports - Electrical schematics - P&ID drawings - Technical and maintenance documentation Technical performance data for this engine type is also available, including information on electrical efficiency, gas consumption, thermal output, and total CHP efficiency. Installation and commissioning available In addition to supplying the CHP unit, CHP Solutions can also provide installation and commissioning on site. Depending on the project requirements, we can offer support with: - Positioning and installation of the CHP unit - Mechanical installation - Electrical installation - Gas connection - Cooling and heat-recovery connections - Grid connection - Start-up - Commissioning - Preparation for grid-parallel or island operation This means the CHP can be supplied not only as a unit, but also as part of a complete installed and commissioned energy solution. The unit is located in the Netherlands and can be inspected by appointment. For further technical information, documentation, photos, installation options, or a complete project quotation, please contact CHP Solutions.

Condition: used, Year of construction: 2009, functionality: unexamined, power: 196 kW (266.49 HP), total height: 2,570 mm, total length: 3,500 mm, total width: 1,200 mm, 2G / WEIER Gas CHP – Engine/Generator Set Gas-powered combined heat and power plant from 2G. The unit is housed in a soundproof enclosure and features a gas control system, heating and engine circuits, and a heat exchanger. Unit/Engine: WEIER Type: GEN.DASGM 250/4L Year of manufacture: 2009 Gkslhccezzbhpjqljc Voltage: 400 V Frequency: 50 Hz Rated current: 400 A Power: 196.0 kW Speed: 1,514 rpm Power factor: cos φ 0.86 Protection class: IP54 Insulation class: F Max. ambient temperature: 70 °C Max. operating pressure: 6 bar Marking: CE / EN 60034/05 Ignition system: Manufacturer: Altronic Inc. Type: CD200 – Programmable Ignition P/N: 791070-6 S/N: 3218 Supply: 12–24 V DC Max. ambient temperature: 105 °C Location: Neuenkirchen-Vörden, Germany An inspection of the unit is possible after prior arrangement. If you are interested or have any technical questions, please feel free to send us an inquiry. We will provide you with further information and documents upon request.

Condition: excellent (used), We offer combined heat and power (CHP) units. For sale: Complete CHP unit, consisting of: • 2 × 20 kW Indop (gas) (Toyota Motor) Gkslhccqjzr H I Nsljc • 5,000-liter buffer tank • All pipes and connections • Gas pipes • Heating pipes • Chimney (stainless steel) • 600-liter expansion tank • All circulation pumps • Control electronics • All sensors The entire system is fully functional and will be sold as a complete unit. Location: Slovenia. Price is negotiable.

Condition: used, Year of construction: 2020, 1) Four-stroke engine Jenbacher J 612 GS-J03, operating hours: under 15,000h, ISO standard output: 2,058kW, design: V 60°, number of cylinders: 12, bore: 190mm, stroke: 220mm, displacement: 74.85l, input power: 4,474kW, mixture: 692kW, oil: 204kW, engine cooling water: 315kW, exhaust gas when cooled to 180°C: 638kW, exhaust gas when cooled to 100°C: 909kW, surface heat: 79kW, rated speed: 1,500/min, moment of inertia: 56.67kgm², direction of rotation (viewed from flywheel): left, radio interference suppression level acc. to VDE 0875: N, starter power: 13kW, starter voltage: 24V, mean piston speed: 11m/s, length: 4,246mm, width: 1,886mm, height: 2,503mm, engine dry weight: 9.5t, engine operating weight: 10.3t, 2) Generator Stamford LVSI 804 W, rated output: 2,643kVA, drive power: 2,058kW, rated active power cos φ=1: 2,004kW, rated active power cos φ=0.8: 1,986kW, rated apparent power cos φ=0.8: 2,483kVA, rated reactive power cos φ=0.8: 1,490kVA, rated current at cos φ=0.8: 3,584A, frequency: 50Hz, voltage: 400V, speed: 1,500/min, overspeed: 1,800/min, power factor (ind.-cap.): 0.8-0.95, efficiency cos φ=1: 97.4%, efficiency cos φ=0.8: 96.5%, moment of inertia: 117kgm², cable outlet: left, insulation class: H, temperature rise (at drive power): F, max. permissible ambient temperature: 40°C, weight: 6.752t, with documentation. An on-site inspection is possible. Gjlezvgg Tshccqlekc

Condition: used, Year of construction: 2011, operating hours: 19,630 h, functionality: fully functional, machine/vehicle number: 1263718, type of input current: three-phase, power: 400 kW (543.85 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, total height: 1,850 mm, total length: 3,090 mm, total width: 1,480 mm, fuel: biodiesel, overall weight: 4,500 kg, type of cooling: water, nominal power: 400 kW (543.85 HP), nominal power (apparent): 400 kVA, input frequency: 50 Hz, empty load weight: 4,500 kg, Equipment: documentation/manual, Two MWM cogeneration plants manufactured in 2011 are for sale. They are ideally suited for decentralized combined heat and power generation. Key technical specifications of the MWM cogeneration plant, according to the documentation: Geljzudbfehccqlokc Fuel used: biogas Generator: MarelliGenerators Engine: MWM GmbH Type: TCG 2016 V8 C Identification No.: 1263718; 1263719 Year of manufacture: 2011 Engine mechanical power: 415 kW Engine electrical power: 400 kW Thermal power: 398 kW Max. fuel consumption: 941 kW Speed: 1500 rpm Ignition system: Altronic ZS3 Ignition system No.: 3644 Ignition angle: 23.00 Ignition plug type: 12342688 Power regulation: multi-stage GEN-1: 19,440 operating hours GEN-2: 19,630 operating hours The cogenerators are sold with electrical and control cabinets, flue gas heat exchangers, emergency coolers, engine circuit pumps, heat exchangers and three-way valves, ventilation air systems, and acoustic containers.