Combined tube and sheet metal laser cutting

BLM LC5

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 42,140 h, machine/vehicle number: 082170115104, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS-4000-CUT, laser hours: 42,140 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 120 mm, pipe length (max.): 4,500 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, type of cooling: water, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, type plate available, For sale: Fiber laser for cutting sheet metal, profiles, and tubes – BLM LC5 combo 4000 W. The laser is fully operational and has been serviced until the end by BG POLSKA – BLM Group. We have two Precitec cutting heads for the laser. One is brand new and installed on the machine; the other is refurbished and kept as a spare. This allows for uninterrupted production in case of a malfunction, as you can simply swap the head. We also have a large stock of consumable parts: nozzles, ceramics, protective lenses, a securely sealed lens replacement kit, supports for tubes and profiles, etc. Prjdpfjxqchpex Aa Esf The laser is being sold due to the construction of a new production hall, which prompted a reorganization of the production line. The machine features automatic nozzle exchanger, automatic centering, and automated tube and profile loading. CNC programming software – Lantek Expert (3 licenses) Year of production: November 2017 I encourage you to see it in operation on-site.

Condition: good (used), Year of construction: 2005, Gebruikte 3 meter Amada CNC kantbank Type: HFP 130 3 Capaciteit: 3100 x 130 ton 8-assig (Y1, Y2, X1, X2, R1, R2, Z1 en Z2) Bouwjaar: 12-2005 Automatisch Fiessler Alas lasersysteem Pedpfxewz I Irs Aa Esrf Euro-stijl gereedschapsklemming met laswisseladapters

Condition: used, functionality: fully functional, Year of construction: 2016, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness copper (max.): 6 mm, total length: 1,500 mm, working range: 3,000 mm, The COMBO BLM LC5 FIBER laser for cutting sheets, pipes and profiles in Fiber 2D technology was built in 2016 in Italy (laser installation: 2017). The laser has a transversely replaceable table, equipped with a module for cutting pipes and profiles. It also has a profile feeder and a receiving table. It works in an automatic cycle, so the operator's work on the machine only involves loading a bundle of profiles onto the feeder and collecting finished parts from the unloading table belt. The machine is designed in such a way that it optimizes the distribution of parts on one profile - after its previous measurement. LC5 allows for cutting pipes and sheets on one machine. This is the only solution on the market that guarantees double possibilities on one machine. The laser allows for performing machining tasks on materials such as: steel, stainless steel, brass, copper and aluminum. It cuts small and large formats of materials with the highest quality and efficiency. laser source: IPG 4.0 kW, fiber optic - Precitec Procutter head, with automatic focal length change - automatic nozzle exchange - sheet format: 3000 x 1500 mm - maximum cutting thickness, mild steel: up to 6 mm (Nitrogen), 20 mm (Oxygen) - maximum cutting thickness, stainless steel: up to 6 mm - maximum cutting thickness, aluminum: up to 15 mm - maximum cutting thickness, copper, bronze: up to 6 mm - processing of pipes and closed profiles: up to fi 120 mm - automatic profile loading: from 6.5 m - maximum detail length, unloading length: 4500 mm - inline or crosswise pallet exchange - seam detection BLM LC5 machine components: - sheet metal module - pipe module Prjdpfx Ajwh A Exoa Esf - IPG resonator - cooler - exhaust - automatic lime dispenser for aluminum cutting

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Podpfx Aajwq Dpqe Eerf Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Prodpfxjv Drigs Aa Eof Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: new, Electrical voltage 400 V Frequency 50 Hz N° Phases 3 / 3 Ph Mass 486 Kg Pedpfjd R Uz Tjx Aa Esrf Dimensions sheet 2700 x 27 x 0.9

Year of construction: 2021, condition: used, KR Quantec 6-axis robot incl. KRC4 controller and robot control panel 12m Smart Pad, 3100mm reach, 20kg payload Psdpfx Aajwgn Dwj Esrf External axis module for coupled rotary axis, mathematically coupled Kuka ArcTech Basic Package + Level 2 advanced TouchSense technology to minimize component tolerances Kuka Wiresense module During oscillation, the voltage is measured by the power source and thus, in the event of component distortion, the welding path is shifted. * Function only for fillet welds Includes Lorch S5 SpeedPulse XT welding machine Includes automatic torch cleaning station *Cutting device *Milling cutter *Welding separation spray

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support). Predpfxetp Dhpj Aa Eof  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: used, Year of construction: 2022, clamping force: 320 kN, displacement volume: 1,068 cm³, injection pressure: 2,120 bar, overall weight: 14,000 kg, load hours: 2,907 h, screw conveyor diameter: 65 mm, terms of delivery: FCA Pegnitz Prodpfxexluk So Aa Eef delivery time: on request terms of payment: 100% prior to delivery

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Psdpfx Ajw Iq Ugoa Eorf Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition