CNC press brake, die bending machine with 8 axes, AMADA PROMECAM, folding machine, press brake.
AMADA HFBO 50 x 2000

Name: AMADA HFBO 50 x 2000
Brand: AMADA
Price: 16000 EUR
Availability: InStock

Fixed price plus VAT

€16,000

Condition

Used

Location

Hessisch Lichtenau Germany

CNC press brake, die bending machine with 8 axes, AMADA PROMECAM, folding machine, press brake. AMADA HFBO 50 x 2000

Show map

Machine data

Machine type:: CNC press brake, die bending machine with 8 axes, AMADA PROMECAM, folding machine, press brake.

Manufacturer:: AMADA

Model:: HFBO 50 x 2000

Condition:: used

Price & Location

Fixed price plus VAT

€16,000

Location:: 37235 Hessisch Lichtenau

Call

Details about the offer

Listing ID:: A19740645

Reference number:: 61978

Update:: 16.01.2026

Description

CNC Press Brake AMADA Type HFBO 50 x 2000
Serial No. HFBO 50 20 S60906 Year of manufacture: 1996
Press brake with 8 axes - CNC control Operator II
Pressing force: 50 tons
Working length: 2090 mm
Stroke: 200 mm
Frame depth: 420 mm
Distance between side frames: 1660 mm
Max. tool installation height: 460 mm
Table width: 60 mm
Table height above floor: 910 mm
Motor power: 4.5 kW
Mains connection: 400 Volt, 50 Hz, 20 Amp.
- 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2)
- 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2)
- Press beam with servo valves and measuring system Y1 and Y2
- Operation via electric foot switch and/or two-hand control panel
- Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm)
- Tool holder for lower tool, 60 mm wide
- 11-piece upper tool set, 30°, total length 1675 mm
- consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length
- 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length
Kdjdpfjw Iq Ugjx Aaloi
- Indicated operating hours: 30,537 h
- Operating manual, electrical diagram, spare parts book included
Weight: 4,700 kg
Good condition

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2013

598 listings online

Call

Send inquiry

Message*

Name*

E-mail*

Telephone

Company name

Zip code & cityCountry

I am a dealer

Receive offers for similar machines

Note: Your inquiry will be forwarded to all sellers in this machine category. This allows you to receive a large number of offers.

Privacy statement

Telephone & Fax

+49 5602 ... show

Fax:

These listings may also fit your interest.

Listing

DMG DECKEL MAHO DMU 50 eVo linear DMG DECKEL MAHO DMU 50 eVo linear

Netherlands

1,192 km

DMG DECKEL MAHO DMU 50 eVo linear
DMG DECKEL MAHODMU 50 eVo linear

Call

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, controller manufacturer: HEIDENHAIN, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. • Tool magazine: 60 tools • Through-spindle coolant (IKZ): 40 bar • Spindle overhauled in 2024 • B and C axes overhauled in 2024 Kedpfx Aajx Rd Hpeljdi Additional equipment • Automation (product handling), freely adjustable for product format and positioning • Paper belt filter • Blum laser tool break detection • Extraction system excluded Technical Specification Taper Size SK 40

See details

Listing

Drilling machine and milling machine TOS VARNSDORF WHN 13.8 C

Jászberény

2,084 km

Drilling machine and milling machine
TOS VARNSDORFWHN 13.8 C

€30,000

EXW Fixed price plus VAT

Call

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-16 1990, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, A machine in good condition, as shown in the pictures, manufactured in 1990 and equipped with NCT 90 control. It has been used very little and is being sold due to underutilization. The total weight of the machine is 33 tons. The machine is fully operational. Disassembly and transportation are the responsibility of the buyer. Kdodpfxew Sx Ago Aalsi

See details

Listing

Birmingham

440 km

Riveting machine
Haeger412

Call

Listing

Marlenheim

1,221 km

Press brake
TRUMPFTRUBEND 3100 X

Call

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 634 h, control type: CNC control, controller model: CN DELEM T3500T, bending force (max.): 100 t, working width: 3,060 mm, stroke length: 350 mm, distance between stands: 3,384 mm, installation height: 500 mm, type of crowning: CNC-controlled, TRUMPF TRUBEND 3100 Press Brake (X) Version with Increased Clearance to 500 mm Only 634 hours powered on! Protective laser CNC crowning table DELEM T3500T CNC control CNC axes: Y1/Y2/X/X2/R/Z1/Z2 Year: 2019 Currently tooled for a bending length of 2550 mm 1 die (V6 mm) with a length of 2550 mm included as additional equipment. MACHINE NOT ANCHORED TO FLOOR Kdedpfxox E Ag Do Aaloi Specifications Bending length: 3060 mm Capacity: 100 tons Frame gap: 3384 mm Ram stroke: 350 mm Motorized backgauge travel: 560 mm Distance table-to-ram: 500 mm Main drive power: 24 KVA Weight: 8,300 kg Machine dimensions (L x W x H): 3,607 x 1,644 x 2,800 mm

See details

Listing

Enschede

1,021 km

Ring & profile bending machine
OSTASOPK-85

Call

Condition: new, Year of construction: 2026, number of rollers: 3, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rollers are moved hydraulically - Three rollers are driven - Two digital displays Kdsdpeucqqusfx Aalsi - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400 V

See details

Listing

Karsin

1,718 km

HAWA milling debarker
havahava

€22,500

Fixed price plus VAT

Call

Condition: good (used), The debarker is great for debarking hardwood as well as softwood. Carriage made of heavy steel construction 5 pairs of drive wheels Milling arm made of heavy steel construction Ksdpotuyr Isfx Aalodi Hydraulic milling head 22 kW motor Log feeder shown in the picture is not part of the ad and is available for an extra charge of 25,000 PLN / 5,500 EUR

See details

Listing

Multi-tasking lathe MAZAK - INTEGREX 200 Mazak INTEGREX 200-4 ST

Babberich

984 km

Multi-tasking lathe MAZAK - INTEGREX 200
MazakINTEGREX 200-4 ST

Call

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Kdsdpfxox S Hm Ie Aalji Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg

See details

Listing

Injection Moulding Machine Husky H-PET230 AE RS95

Germany

1,293 km

Injection Moulding Machine
HuskyH-PET230 AE RS95

Call

Year of construction: 2015, condition: ready for operation (used), Two complete injection molding facilities with two Husky injection molding machines, five complete tools with metal separator, gravimetric Motan mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of construction: 2015, max. shot weight: 2424g, max. PET throughput: approx. 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, bottom thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, bottom thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, bottom thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, bottom thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. 6) 48-cavity H-PET-AE mold. Total system dimensions X/Y/Z: approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, color mixing devices and T-conveyor. Documentation available. An on-site inspection is possible. Kdedpfow Az Riox Aaloi

See details

Listing

Automatic Label printer, labeller Weber LEGI-AIR 4050 CC zebra ze500

Tata

1,972 km

Automatic Label printer, labeller
Weber LEGI-AIR 4050 CCzebra ze500

€4,900

Fixed price plus VAT

Call

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll Kedpfx Aaefp A I Eolsdi 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

See details

Listing

Hydraulic guillotine shear, heavy-duty metal plate shear, plate shearing machine STEINER HTS 30 / 20 R

Hessisch Lichtenau

1,244 km

Hydraulic guillotine shear, heavy-duty metal plate shear, plate shearing machine
STEINERHTS 30 / 20 R

€28,500

Fixed price plus VAT

Call

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch - Spare blade Kdjdpfx Aaod Hxx Aelsi - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.

See details

Advertise here