Drilling machine

Bernardo GB 30 Vario

Condition: new, bore capacity in steel (diameter) 32,0 mm threading 22 M bore stroke 125 mm throat 280 mm morse taper 3 MK table: 450 x 380 mm / 14er Nut turning speeds 70 - 3.500 U/min feed 0,1 / 0,2 / 0,3 mm/U column diameter 110 mm weight 320 kg range L-W-H 500x800x2.100 mm total power requirement 1,1 / 2,2 kW characteristics Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Key chuck 1 - 13 mm / B 16 - coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector - LED machine light - Digital speed display - First filling with Shell Tellus 46 Hodpfxjxabiqe Agconk - Height-adjustable protective cover

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Hedothd Shopfx Agconk Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Hnjdsv S U Izspfx Agcsk Dimensions Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Hedpfxotwliwj Agcsnk Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: new, Precise, smooth-rolling standard drill, high accuracy and quality. Drill table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Hjdjda Nqxopfx Agcenk Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle in stock, available now

Condition: ready for operation (used), Year of construction: 2020, operating hours: 11,574 h, travel distance X-axis: 1,525 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 625 mm, total height: 3,235 mm, overall weight: 13,500 kg, product length (max.): 5,000 mm, This 3-axis DOOSAN MYNX 7500 was manufactured in 2020, featuring a Heidenhain TNC 620 control with a TS 460 probe. It has a table size of 1600 mm by 750 mm and a maximum spindle speed of 12,000 rpm. With dimensions of 5000 × 4050 × 3235 mm and a weight of 13,500 kg, consider the opportunity to buy this DOOSAN MYNX 7500 vertical machining centre. Contact us for more information. • Table Length: 1600 mm Hjdox U Dtwepfx Agcjnk • Table Width: 750 mm • Spindle Taper: ISO 40 dual contact • Maximum Spindle Speed: 12000 rpm Dimensions Machine Depth 4050 mm

Year of construction: 1996, condition: good (used), machine/vehicle number: xxxx, High performance - bench tapping machines on T-slot plate Technical data: - Tapping capacity approx. M 3 - M 16 - Speed range up to 500 rpm - Working range ( swivel radius ) 2500 mm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm . table height 910 mm - Machine vice with jaw width 200 mm Hnedef Tcy Djpfx Agcok - 3 jaw chucks 250 mm - pneumatic connection with pressure reducer - mobile underframe - space requirement approx. W 2400 x H 2000 x D 1000 mm - weight approx. 1100 kg

Condition: new, table length 1200 mm table width 1200 mm table height 840 - 890 mm Hedpfx Aepk Iv Ujgconk weight of the machine ca. 0,32 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,850 h, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, total height: 2,985 mm, overall weight: 5,000 kg, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis DOOSAN DNM 4500 vertical machining center was manufactured in 2020. It features a SIEMENS 828 D CNC controller, with X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 510 mm. The spindle operates at 12,000 rpm with a drive power of 16.5 kW. It includes a tool magazine with 30 slots and additional equipment like a chip conveyor and an electronic handwheel. Contact us for more information about this machine. Additional equipment • Electronic Handwheel • Chip conveyor • Oil skimmer • Emulsion flushing gun • 2 x Hydraulic vice • 25 x Clamping chuck BT40 Machine Benefits Technical Machine Benefits • Table dimensions: 1000 x 450 mm • Distance spindle nose - table surface: 150 - 775 mm • Max. Tool diameter with free neighboring places: 125 mm • Max. Tool diameter with occupied neighboring places: 80 mm Hnodpfex D E H Iox Agcjk Extra Information Machine still under power Dimensions Machine Depth 2158 mm

Condition: new, Year of construction: 2026, CORMAK ZX 40BPC is a solid metal drilling and milling machine. Possibility of head rotation +/- 90 degrees of spindle, possibility of head rotation +/- 90 degrees, automatic spindle feed, right and left rotation, large table, liquid cooling, automatic table feed in the x axis, powerful engine, ability to drill up to 40 mm. Rotational speed up to 2500 rpm Machine characteristics HEAVY STABLE CAST IRON AUTOMATIC SPINDLE FEED ADJUSTABLE HEAD HEIGHT MASSIVE CROSS TABLE WITH PRECISELY GRINDED SURFACE DOVtail-shaped guides Hnjdpsvxhfmjfx Agcsk QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATIONS ROTATING HEAD +/- 90° Technical data Max. drilling size (steel/cast iron) 32/40mm Face milling width 80mm End milling width 22mm Spindle extension 125mm Spindle taper MT4 Spindle speed (1400 rpm motor) 50～2500min-1 Maximum distance of the spindle tip from the table 735mm Maximum distance of the spindle tip from the base 1245mm Distance of the spindle from the column surface 272 mm Dimensions of the work table 730x210mm Base dimensions 690x520mm Engine 1.3/1.8kW Cooling engine 40W Dimensions 1200x1000x1910mm Weight 440 kg