Plasma cutting system

BACH ThermoCut

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Pgodpfxozizkyj Agxsp Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: good (used), Various press brake tools, punches, dies Pgodsw Emf Depfx Agxjp Bending length 2500 + 3050 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1992, machine/vehicle number: 19703, Offer 22584 Technical data: - Welding current 320 A 60% ED - 270 A 100% ED - Welding current adjustable in 42 steps 40 A - 320 A - Digital volt + ampere display - Separate wire feed case with hose package approx. 1 lfm - intermediate package machine - wire feed case approx. 1,5 m - 4 roller wire feed steplessly adjustable - 2 stroke - 4 stroke - regulation - Spot welding - welding length / welding time adjustment - wire back firing adjustment - ground cable Pjdpsp H Tu Ejfx Agxjgp - pressure reducer - connection 400 V / 32 A / 18 kVA - Space requirement approx. W 550 x H 1200 x D 1100 mm - Weight approx. 300 kg

Condition: new, Year of construction: 2025, TECHNICAL SPECIFICATIONS height of center 330 mm distance between centers Spindle bore 103 mm Swing over bed 660 mm Pjdpodzzw Uofx Agxjgp Swing in the gap 840 mm Swing over Slider 420 Speed range 36 - 1600 rpm (12 steps) Spindle nose ISO 702 / II No. 8 Range of longitudinal feeds 0.063 - 2.52 mm / rev (65 steps) Range of feed rates 0.027 - 1.07 mm / rev (65 steps) Metric threads 1 - 14 mm (22 steps) Inch thread 28 - 2 speed / inch (25 steps) Module thread 0.5 - 7 mm (18 steps) Diametrical thread 56 - 4 DP (24 steps) Quill diameter 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 11 kW Weight 3.050,00 kg Dimensions 3135 x 1050 x 1450 mm

Year of construction: 2007, condition: good (used), machine/vehicle number: 12641207, Offer 23108 Technical data: Pgodpfx Agslzif Soxsp - Welding current max. 550 A 60% ED - 420 A 100% ED - welding current adjustable 50 A - 550 A - 3 coarse levels + 12 fine levels - separate wire feed case with between package 4 m - 4 roller wire feed infinitely variable 0,5 - 24 m/min - 2 stroke + 4 stroke - regulation - water cooled hose package approx. 4 lfm - ground cable - pressure reducer - connection 400 V / 64 A - space requirement approx. W 550 x H 1310 x D 1050 mm - weight approx. 150 kg

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding rotary table KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range: continuously adjustable via crank gear motor, 0 - 90° Speed: 0.3 to 2.5 RPM Pjdpfx Asc Ug Tljgxogp Includes foot pedal remote control Optional extra: Quick-release chuck Diameter: 300 mm, €450

Condition: new, pressure 120 t stroke 400 mm dayligth 900 mm 1220 mm 400 mm feed down 5,8 mm/sec feed up 9,5 mm/sec Heads 200x125 mm Pgsdpfx Ageyv Ntfsxsp total power requirement 6 kW weight of the machine ca. 1250 kg dimensions of the machine ca. 1900x1000x2550 mm

Condition: used, Year of construction: 1969, turning diameter over bed 500-600 mm turning length 2800 mm bore diameter 130 mm Psdpfx Agsvdx I Aoxegp weight of the machine ca. 5,25 t required space / m

Condition: used, Year of construction: 1976, functionality: unexamined, total length: 4,100 mm, total width: 1,900 mm, total height: 1,900 mm, bed width: 550 mm, rotational speed (max.): 1,800 rpm, For sale is a Boehringer DM550 centre lathe with leadscrew/feed shaft from 1976 (18.5 kW). The DM 550 features a swing diameter of approx. 550 mm (over bed) and offers high rigidity for heavy-duty and precise turning operations. The machine is in age-appropriate condition, has not been tested, and is being sold as-is. Our Service Promise: Pedsxyxu Dspfx Agxogp We prioritize quality, expertise, and customer satisfaction. Our team consists of qualified and experienced technicians specialized in Mazak machines as well as other machinery. We place great emphasis on personal support and are happy to assist you anytime, even after purchase. With us, you are in the best hands – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All information subject to change without notice.

Condition: new, Year of construction: 2022, Shredding machine 630 Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Knives: 30 pieces, concave, multi-rotatable Rotor diameter: 260 mm Rotor design: EcoRings Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Screen size: 10 - 12 mm Suction nozzle diameter: 160 mm Podpfxeku Abio Agxsgp