Press brake tools / Die

UNBEKANNT

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: Angled conveyor belt with protective cover -Speed: 4.2 m/min -Conveyor belt width: 80 mm -Conveyor belt length: 1355 mm / 340 mm -Motor: Groschopp 0.065 kW -Dimensions: 1780/500/H340 mm Tsdpfxsz D Swqe Akiod -Weight: 63 kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 300 h, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg Todezvm Azspfx Akisd

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Sheet metal clamp: Lifting clamp -Clamping range: 0-20 mm -Load capacity: 1 t -Transport dimensions: 125/70/H210 mm Tjdo Agfvhspfx Akiod -Weight: 3 kg

Condition: excellent (used), Running roller, steel roller, guide roller, support roller, cam roller, carrying roller, running plate, sliding roller, conveyor roller with flange -Roller: Conveyor rollers with flange, 62 pieces unused -Type: Ø 50/65/8 mm steel -Hole: Ø 8 mm Tedpfxs Agflxe Akisd -Wheel diameter: 50 mm -Flange diameter: 65 mm -Submission/Price: complete -Dimensions: Ø 65 x 24 mm -Weight: 0.1 kg/pc.

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: Tedpfxjx Ew Dqe Akiod - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: good (used), Plastic pipe, polyamide pipe -Plastic pipe: 50 pieces -Length: 1695 mm -Outer diameter: 96 mm -Inner diameter: 76 mm -Weight: 4 kg/piece -Submission/Price: complete -Transport dimensions: 1700/1056/H600 mm -Total weight: 200 kg Tedpfx Akey S S Udsiod

Condition: used, Used Machine Features and Technical Specifications - Motor: 4 kW / 2,910 rpm - With steel blades - Outlet openings: 200 mm Tods Af Nafopfx Akiod

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm Tedpfx Akouagxpsisd weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks Tsdpfx Ao Af Igfskijd -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 115/90/H80 mm -Total weight: 4.3 kg

Condition: good (used), Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor Tedpfx Aevygwqskied -Cell wheel lock. 8 blades, with drive -Speed: 49 rpm -Drive motor: CHT 0.75 kW -Inlet/outlet: 250 x 130 mm -Dimensions total: 510/490/H280 mm -Weight: 50 kg

Condition: as good as new (ex-display), Year of construction: 2025, CMS Taktika Vertical cnc working center for Glas Bearbeitungsmaße: Max. Glas-Length: 3.100 mm Max. Glas-height: 2.000 mm Min. Glas-length: 320 mm Tjdswd Ichjpfx Akiod Min. Glas-height: 220 mm Thickness: 4-15 mm Options: - 2x groups of suction cups which 2 suction cups on each group - 2x Elektrospindle 6 kW 0-12.000 U/Min - Tool Magazin with 12 slots - Additional drilling from the backside - CAD/CAM - central lubrification

Condition: used, Year of construction: 1990, length 8000 mm width 3000 mm number 1 Plate thickness 400 mm weight of the machine ca. ca. 14 t dimensions of the machine ca. 8 x 3 x 0,4 m This plate has 10 t- slots in length direction each 32 mm wide. Todpjv Ey Nqefx Akiod

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate with support ribs Tsdpfxekrgibo Akisd -Length: 2020mm -Width: 1250mm -Groove width: 25 mm -Total dimensions: 2020/1250/H315 mm -Weight: 2280 kg

Condition: new, Year of construction: 2026, A professional folding machine with a 4.14 m working surface, directly from the manufacturer Prod-Masz. Possible sheet thickness to be processed: sheet steel up to 0.7 mm, bending radius: up to 160° to create a fold. The two cheeks are CNC-milled from solid material and ensure a long service life. The machine is solidly made, the weight of the machine is 700kg !!! Do you think there is no such company that can bend you? Is! Prod-Masz is your bending specialist! Actually our abant benches! The sheet metal bending machine has a holder for the cut sheet metal at the outlet, a protractor, angle stop and gas pressure damper to slightly position the bending beam in the height. Tjdpecgmd Usfx Akiod Maximum working width of the press brake: 4140 mm Bending performance: up to 0.7 mm (steel sheet) Bending machine bending angle: 160 degrees Bending beam thickness: 20 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Passage opening: 80 mm degree scale angle stop depth stops Weight of the folding bench: approx. 700 kg The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros Manual folding machine plus 75 euros The machine complies with CE guidelines and has a 12-month guarantee Delivery: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 27 mm -Dimensions: see photo technical. drawing -Total dimensions: 90/80/H65 mm Tedpsrh Nipjfx Akijd -Total weight: 2.4 kg