Arburg 170 CMD-150-45

ARBURG

Condition: excellent (used), Year of construction: 2006, ARBURG 370 S — 600-290 | Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Fpsdpjzrwz Tjfx Aivjn Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: new, pressure 8,5 kN Fodpfx Aijfv Awasvepn stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: excellent (used), Year of construction: 2009, Clamping force: 320 t Clamping force: 3200 kN Opening force: 130 kN Opening force (boosted): 100 / 800 kN Opening stroke: 700 mm Mould height: 300–700 mm Distance between platens: 1000–1400 mm Platen size: 1040 × 1040 mm Max mould weight (per half): 3600 kg Fedpfx Aisyya Insvepn Ejector force: 100 kN Ejector stroke: 250 mm Screw diameter: 50 mm Shot weight: 359 g Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Shot volume: 392 cm3 Pump drive power: 45 / 55 / 55 kW Dry cycle time: 3.5–504 s Total installed power: 70.5 / 89 / 96 kW Working hours: 51814 h Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2002, ARBURG 320 S 350-150 (2002) General information 1. Manufacturer: ARBURG 2. Model: ALLROUNDER 320 S 350-150 3. Year of manufacture: 2002 4. Machine type: Hydraulic injection moulding machine 5. Control system: ARBURG SELOGICA (version to be confirmed) Clamping unit 1. Clamping force: 350 kN (35 ton) 2. Platen dimensions: 455 × 455 mm 3. Distance between tie bars: 320 × 320 mm Fedpfx Aewmqx Reivjpn 4. Maximum daylight: 575 mm 5. Minimum mould height: approx. 175 mm (to be confirmed) Injection unit 1. Screw diameter: 30 mm 2. Screw type: Wear-resistant, suitable for materials with up to 30% glass fibre (as specified) 3. Injection pressure: approx. 2,210 bar 4. Maximum injection volume: approx. 78 cm³ 5. Maximum shot weight (PS): approx. 71 g 6. Maximum screw stroke: approx. 110 mm 7. Effective screw length: 20 L/D 8. Maximum injection flow: approx. 82 cm³/s Hydraulic system 1. Hydraulic pump motor power: approx. 11 kW 2. Hydraulic oil capacity: approx. 120 l Dimensions and weight 1. Machine weight: approx. 2,250 kg 2. Country of manufacture: Germany

Condition: used, Meat mixer Laska Z 250 liters Mixing hopper: 250 liters Filling quantity max: 200kg Electrical power: 5.5kW Weight: 1380kg Delivery time: 30 days after advanced payment Fodpfx Aslawp Seivepn

Condition: excellent (used), Year of construction: 2013, Clamping force: 130 t Screw diameter: 40 mm Shot weight: 184 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Shot volume: 201 cm3 Fpsdpjz Nw H Nsfx Aivon Type: Horizontal Drive: Hydraulic Hours: 21229 h

Condition: used, Year of construction: 2007, Arburg 320C 500-100 (2007) Clamping unit Clamping force: 500 kN (50 tonnes) Clearance between tie bars: 320 × 320 mm Max. opening stroke: 350 mm Min. mold height: 200 mm Max. platen distance: 550 mm Ejector force / stroke: 30 kN / 125 mm Injection unit (Injection unit – type 100) Screw diameter: 25 mm standard Max. injection pressure: 2000 bar (with 25 mm screw) Max. injection volume: 49 cm³ (with 25 mm screw) Max. shot weight (PS): approx. 45 g Nozzle contact force: 50 kN Weight and dimensions Machine weight: approx. 2,250 kg Oil capacity: approx. 165 l Fsdpfsz Nidgox Aivspn

Condition: new, Year of construction: 2025, Pneumatic radial riveting machine RMU-12-C is designed for forming caps in solid steel rivets d=2...12 mm and in tubular steel rivets d=4x1...14x1 mm. Technical data: 1. Diameter of solid steel rivets - 2...12 mm. 2. Diameter of tubular steel rivets - 4...14 mm. 3. Motion of riveting head - 20 mm. 4. Time of unriveting for one rivet - 1...10 sec. 5. Motor power - 0,75 kW. 6. Voltage - 220/380 V 50 Hz. 7. Working pressure - 3...6 Bar. 8. Weight - 100...120 kg. This riveting machine can be used for movable and immovable riveted connections. Fpjdpfxsfvztuo Aivsn The cost of the riveting machine does not include the cost of punches and shipping costs.

Condition: good (used), Year of construction: 2000, Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Max mold hight : 200 m Max opening : 730 g Hydraulic cores : 0 \+ robot TECHNOMATIC Fedpfx Aioxqcrzovjpn

Condition: used, Injection molding machine ARBURG, type Allrounder 221 M 350-75 Serial No. 163646, Year of manufacture 1995 Clamping force 35 tons (350 kN) Screw diameter, presumably Ø 25 mm Platen size 342 x 250 mm Mold size, max. 221 mm Mold mounting height 150 to 300 mm Column spacing 221 mm (center distance) Opening stroke - platen stroke, max. 200 mm Fodpfxezx Etwe Aivspn Ejector stroke 60 mm Ejector force 27 kN Hydraulic oil tank capacity 120 liters (delivery without oil) Heating capacity 4 kW Motor power, hydraulic pump 7.5 kW Power supply 400 volts, 50 Hz, 12 kW - ARBURG MULTRONICA control system with foil keyboard and screen - Stainless steel granulate hopper, 50 liters, on the injection unit - Adjacent control cabinet Space requirement without transport pallet, L x W x H 2750 x 1350 x 1850 mm Transport dimensions on pallet, L x W x H 2750 x 1700 x 1900 mm Weight approx. 1300 kg Good condition

Condition: used, Year of construction: 1998, machine/vehicle number: 145893, clamping force: 350 kN, screw diameter: 25 mm, clearance between the columns: 221 mm, displacement volume: 56 cm³, injection pressure: 2,500 bar, For sale is an Arburg injection molding machine, type Allrounder 221-75-350. The machine is in used condition. Technical data: ARBURG Maschinenfabrik Hehl & Söhne GmbH & Co.KG Model / Type: Allrounder 221-75-350 Machine No. / Serial Number: 145893 Year of Manufacture: 1989 Machine Weight: 970 kg Clamping Force: 350 kN Clear Tie Bar Spacing: 221 mm x 221 mm Platen Dimensions: approx. 342 mm x 342 mm Opening Stroke / Stroke: 275 mm Tool Installation Height: 150 mm / 300 mm Max. Platen Distance: 425 mm Injection Unit: Screw Diameter: 22 mm / 25 mm Max. Injection Volume: up to 56 cm³ Max. Shot Weight: up to 50 g Specific Injection Pressure: up to 2500 bar Electrical Connection Values & Power: Operating Voltage: 380 V (3 phases) Mains Frequency: 50 Hz Heating Power: 3.46 kW Pump Motor: 7.5 kW Total Power / Total Connected Load: 11.0 kW Upon request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT. Fpedpfx Aiszki N Tovon Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: used, Injection molding machine ARBURG, Type Allrounder 320 C 600-100 Serial No. 189356, Year of manufacture 09/2002 Clamping force 60 tons Screw diameter 25 mm Dosing volume max. 49 cm3 Injection pressure max. 1570 bar Opening stroke - platen stroke max. 350 mm Platen dimensions 446 x 446 mm Tie bar spacing 320 x 320 mm Mold height min.: 200 mm Platen spacing min.: 200 mm Platen spacing max.: 550 mm Centering of fixed and moving platens 125 mm Heater power 4.9 kW Motor power hydraulic pump 15 kW Mains connection 400 Volt, 50 Hz, 19.9 kW - Machine control SELOGICA - Two controllable hydraulic circuits for core pullers - Injection unit with COLORTRONIC material hopper for automated granule feed Fedpozqglrjfx Aivepn - U-version interface - HHG interface - Control ARBURG MULTRONICA with foil keypad and integrated display - 88790 operating hours recorded (power-on hours) - 44925 operating hours of the hydraulic pump (hydraulic on) - Control cabinet fixed to the machine - Work area protective doors at the front and rear, manually sliding with safety switches - Mobile control panel with function keys, mounted on the back of the machine Space requirement L x W 3650 x 1700 mm Height with material hopper 2200 mm Weight 3000 kg Good condition

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 Year of manufacture: 2004 Injection unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Dosage volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Fsdpfx Aioz Iq Iijvepn Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Dryer Fpsdpjumnknofx Aivon Wittmann Drymax C30-30-P Year 2004 Conveyor units year 2005 2 pieces available

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 Year of construction: 1999 Injection unit: Screw diameter: 35mm Injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Fsdpfx Aisz Iq Hfjvspn Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - clean production conditions Euromap 12 Robot interface Core pull control Hardened injection unit - bimetal Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request