Arburg 1200T 2000-800 (vertical, rotary table,working hours: 9.562)
Arburg 1200 T 2000-800

Name: Arburg 1200 T 2000-800
Brand: Arburg
Availability: InStock

Year of construction

2019

Condition

Used

Location

Trenčianske Stankovce Slovakia

Arburg 1200T 2000-800 (vertical, rotary table,working hours: 9.562) Arburg 1200 T 2000-800

Machine data

Machine type:: Arburg 1200T 2000-800 (vertical, rotary table,working hours: 9.562)

Manufacturer:: Arburg

Model:: 1200 T 2000-800

Year of construction:: 2019

Condition:: like new (used)

Price & Location

Seller location:: 3011 Sedličná, 913 11 Trenčianske Stankovce, Slovakia

Call

Details about the offer

Listing ID:: A19403861

Reference number:: 250175

Update:: 30.04.2026

Description

Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm)

Clamping unit 2000T

Table diameter: 1200mm

Angle rotation: 180 degrees

Clamping force: 200 tons

Opening force max. kN/mm: 115/500

Platen daylight max. : 600 mm

Injection unit

Screw diameter: 45 mm

Shot volume: 318 cm3

Shot weight: 291 g

Injection pressure: 2470 bar

1. Model: T model
2. Machine type: 1200 T 2000 - 800
3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant
4. Screw: Reinforced screw coupling for splined coupling geometry
5. Control system: SELOGICA ‘direct’ controller
6. Technology stage: Stage 2 servo-regulated with 2 control pumps
7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating
8. Nozzle: Open nozzle 45 mm with nozzle tip
9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2
10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating
11. Clamping platen: Mould mounting platen set, central diameter 125 mm
12. Blow unit: Mould blow unit with pressure reducer at station 1
13. Safety: Optical barrier at loading station, continuous oil cooling and filtration
14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper
15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1)
16. Electric axes: Basic equipment for electric axes control
17. I/O: 4 programmable inputs/outputs on terminal rail
18. Sockets: Additional socket combination (1 CEE, 1 Schuko)
19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation
20. Acoustic alarm: Error alarm acoustic signal
21. Safety interlock: Interface for safety interlock of door (EUROMAP 73)
22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold
23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter
24. Manual & labels: CD operating manual & spare parts list, Slovak language labels
25. Machine feet: Anti-vibration footplates
Nsdpfxewugczo Aqwslf
26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme
27. Display languages: IT/EN/SK

Documents

19403861-01.pdf

Seller

Last online: A week ago

Registered since: 2018

164 listings online

Call

Send inquiry

Telephone & Fax

+421 32/3... show

These listings may also fit your interest.

Listing

Tractor JCB Fastrac 3170 inclusive Mulag Front u. Heck Mäher

Sottrum

1,160 km

Tractor
JCBFastrac 3170 inclusive Mulag Front u. Heck Mäher

€59,900

Fixed price plus VAT

Call

Condition: used, Year of construction: 2008, operating hours: 14,357 h, power: 129 kW (175.39 HP), gearing type: other, maximum speed: 80 km/h, first registration: 03/2008, color: orange, overall weight: 12,000 kg, mileage: 14,358 km, empty load weight: 7,277 kg, maximum load weight: 4,723 kg, axle configuration: 4x4, suspension: steel, number of seats: 2, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, air conditioning, all wheel drive, cabin, onboard computer, power assisted steering, trailer coupling, * German vehicle * 1st owner * Condition, see photos * Mulag verge mower head RMK1200 * Working width: 1,200 mm * Mounted on Mulag boom MRS300 * Reach: 3.00 meters * Drive via PTO shaft * Mulag rear boom MHS800 * Lateral displacement: 1,600 mm * Reach right & left: 8.70 meters * with Mulag mower head MK1200 * Working width: 1.20 meters * Municipal hydraulics & rear hydraulics * Rear power lift * Height-adjustable trailer hitch * Trailer load: 32,845 kg * Comfort cabin with 2 seats * Air conditioning * Windshield heating * Outside temperature display * Comfort driver's air suspension seat * Electrically heated mirrors * JCB Power Shift transmission with three load-shifting stages * Disc brakes * ABS * Differential lock * Rotating beacon lights * Distance warning lights * Work lights * 4x4 all-wheel drive Nsdsxiyqfepfx Aqwjlf * Tires: 495/70R24 * Maximum speed: 80 km/h * LOF tractor unit, agricultural tractor * Wheelbase: 3,000 mm * GVWR: 12,000 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the possibility of inspecting and examining the goods so that the buyer does not have any false expectations regarding the condition and suitability. Inspection and examination are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicle. Subject to change, prior sale and errors.

See details

Listing

Forst (Lausitz)

1,552 km

Vacuum pump
BOC EDWARDSGV600 EH4200

Call

Listing

Cleaning system - Top loader Glogar TR450

Linz-Land

1,685 km

Cleaning system - Top loader
GlogarTR450

Call

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type TR450 The spray-rotation cleaning system, type TR450, is an automatic cleaning and degreasing system with a lid that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets with dimensions of L x W x H 520 x 320 x 200 mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on the fact that the parts in the basket can be slightly tumbled when cleaning bulk goods. The fill level in the basket must be taken into account for this purpose. The system is also equipped with a flood basin under the parts basket, which enables the parts to be immersed and scooped out, resulting in an even better cleaning result. including the following equipment: • Completely made of stainless steel 1.4301 inside and outside • Level monitoring and automatic fresh water refill • Insulation of the entire system • Hot air drying (power: 11.6 kW) • Steam extraction • Oil skimmer for bath maintenance • Automatic fresh water refill Nsdpfx Aofbt Sieqwjlf • 1 small parts basket 520 x 320 x 200 mm, mesh size: 6 x 6 mm, incl. height-adjustable locking lid Connection power: approx. 20 kW (32 amp plug)

See details

Listing

Wien

1,814 km

600/200 CDC
BATTENFELD

Call

Listing

Retort heat treatment furnace MUT 360/400-1150

Zuchwil

1,314 km

Retort heat treatment furnace
MUT360/400-1150

Call

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used Nlodpfoiryyaex Aqwof - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

See details

Listing

Dortmund

1,077 km

VACUUM OVEN
SCHMETZ

Call

Listing

Germany

1,192 km

BOY XS 161
BOYXS 161

Call

Condition: ready for operation (used), Year of construction: 2024, operating hours: 8 h, clamping force: 100 kN, screw diameter: 18 mm, total width: 526 mm, total height: 1,692 mm, overall weight: 450 kg, product length (max.): 1,485 mm, Hydraulic injection moulding machine manufactured in 2024. This BOY XS 161 features a clamping force of 100 kN and a maximum injection pressure of 2298 bar. It includes a 18 mm screw diameter and a theoretical shot volume of 6.1 cm³. If you are looking to get high-quality injection moulding capabilities, consider the BOY XS 161 machine we have for sale. Contact us for further details. • Control system: Procan ALPHA 4, 15" multi-touch HMI • Injection pressure: max. 2298 bar • Theoretical shot volume: 6.1 cm3 • Distance between tie bars: 160 mm (205 mm diagonal) • Max. daylight between platen: 250 mm • Adjustable opening stroke: 150 mm • Min. mold height: 100 mm (optional 50 mm) • Hydraulic system pressure: 300 bar • Oil tank capacity: 28 liters • Installed total power: 6.1 kW • Electrical supply: 400 V 3~ N, 50/60 Hz, 12.4 A • min. machine height: 1380mm • max. machine height: 1692 mm • Footprint: 0.78 m2 • Safety guarding: Fully enclosed clamping zone with clear polycarbonate sliding safety gate and electrical interlock Nlodpfx Ajyw I Azoqwof • Peripheral interfaces: Pneumatic and cooling water connectors on the non-operator side • Status indicators: 3-tier LED signal tower (Red/Yellow/Green) Additional equipment (accessories) • 3-liter gravity material hopper • Red 16A CEE power plug • Heavy-duty wooden transport/leveling base

See details

Listing

Thermoforming machine Illig UA 100 4G Solo/ BE

Möckmühl

1,301 km

Thermoforming machine
IlligUA 100 4G Solo/ BE

Call

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Nsdewf Dvajpfx Aqwolf Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Optional retrofit for roll processing: - Cross cutter and feeding rollers in feed area - RO 800 roll stand

See details

Listing

Injection Moulding Machine Arburg ALLROUNDER CENTEX 320C 500-250 VO

Deutschland

1,293 km

Injection Moulding Machine
ArburgALLROUNDER CENTEX 320C 500-250 VO

Call

Listing

SUMITOMO SHI DEMAG Intelect 2 50/370-110 Sumitomo (SHI) Demag Intelect 2 50/370-110

Germany

1,192 km

SUMITOMO SHI DEMAG Intelect 2 50/370-110
Sumitomo (SHI) DemagIntelect 2 50/370-110

Call

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, clamping force: 500 kN, screw diameter: 25 mm, injection weight: 46 g, total height: 1,779 mm, overall weight: 4,200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Additional equipment • Granule Dryer • Handling System • Conveyor Belt - 1400 mm x 400 mm • Precision Scale • Temperature Units - 2x HB‑Therm Machine Benefits Technical Machine Benefits • Exceptional energy efficiency • Enhanced platen rigidity and mold safety • Fully electric direct-drive system • Ultra-precise direct-drive motors with 0. 1 ms response time • Displacement: 52 cm³ • Spray pressure: 2180 bar • Tool clamping platens: 520 x 570 mm Extra Information Njdpfjx D Eccsx Aqwelf Control Unit Advanced control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine Depth 4308 mm

See details

Advertise here