Arburg Allrounder 520S 1600-400

Arburg Allrounder 520S 1600-400

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Nedpfew Rqwtjx Akiolh

Condition: like new (used), Year of construction: 2015, operating hours: 987 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 661 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: HURCO, controller model: WinMax 5, total height: 3,010 mm, total length: 4,800 mm, total width: 2,300 mm, table width: 660 mm, table height: 1,000 mm, table length: 1,680 mm, table load: 2,000 kg, overall weight: 8,420 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 987 h, distance table center to spindle nose: 101,711 mm, spindle motor power: 18 W, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, This CNC HURCO VMX60i machining center has seen very little use and is in excellent working condition. With only 987 operating hours and 4,115 power-on hours, it represents an ideal solution for those seeking a reliable, ready-to-use machine with extremely limited usage compared to its age. Key features: * CNC Hurco WinMax / MAX 5 * X/Y/Z axis travels: 1524 x 661 x 610 mm * ISO40 spindle at 12,000 rpm * 18 kW spindle motor * 1680 × 660 mm table with a load capacity of 2,000 kg * 30-position chain-type tool magazine The price refers to the machine in the configuration described in the technical data sheet. Nlsdszmfn Rspfx Akish Upon request, the following equipment can also be provided: * Fourth-axis table * Tailstock * Set of tool holders The supply of the equipment will be quoted separately based on the customer's needs. For over 30 years, Otto Machine has been selecting and marketing used machine tools in Italy and abroad. The machines can be viewed in our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. We can arrange a visit to our showroom or a video call to view it remotely.

Condition: good (used), Year of construction: 2008, Ref. no.: 18643 Manufacturer: ARBURG Type: 470 C 1500-400 Golden Editions Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Nledpfx Aoxvy Rlekijh Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards. Key advantages of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment -4-way guide changer -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining Nljdpfxjvppw Sj Akioh -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: ready for operation (used), Year of construction: 2019, operating hours: 300 h, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg Nodpfx Aszvm Azokiolh

Year of construction: 2020, condition: used, More information will be provided upon request. Nedpfxszwnrms Akislh

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Turning length: 1050 mm Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Nledpjv Epzvjfx Akijh Tool post stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Accessories: Chip conveyor Tool holders, chuck jaws

Condition: as good as new (ex-display), Year of construction: 2026, SRF Master, illustration on the left 2 m extraction arm Application area Low amounts of smoke/dust Occasional use Benefits Requires little readjustment of the extraction hood More flexible due to the additional hose connection at the rear Features Safe operation thanks to filter monitoring Extraction hood can be rotated and swiveled 360 degrees Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation rate: > 99% Filter material: Glass fiber fleece Welding fume separation class: W3 Nlodpodqzbrjfx Akish Additional filters: Two pre-filters Basic data Extraction capacity: max. 950 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 2 m Diameter of suction connection: Ø 150 mm Power connection: 230 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: approx. 71 kg

Condition: ready for operation (used), Year of construction: 2025, operating hours: 1,351 h, controller manufacturer: FANUC, controller model: i Series iPlus, This 6-axis DN Solutions DNX 2100S Advanced was manufactured in 2025. It features a FANUC i-Series control, a 6-axis configuration including B and C axes, and a tool magazine with 60 positions. The machine offers full turn-mill capabilities, through-spindle coolant up to 70 bar, and a Renishaw probing system. Consider the opportunity to buy this DN Solutions DNX 2100S turn-mill centre. Contact us for more information about this machine. • Axes Configuration: 6 axes (X, Y, Z, B, C1, C2) • B-axis milling spindle (indexing accuracy 0.0001°) • Milling/Main Spindle: Nledpszv Ruujfx Akieh • Tool Interface: HSK-C63 • Max Speed: 12000 rpm • Power: 18.5 / 15 kW • Max Torque: 58 Nm • B-axis Travel: 240° (±120°) • Left Spindle: • Chuck Size: Ø255 mm (10") • Max Speed: 4000 rpm • Power: 22 / 15 kW • Max Torque: 456 Nm • Right (Sub) Spindle: • Chuck Size: Ø210 mm (8") • Max Speed: 5000 rpm • Power: 18.5 / 15 kW • Max Torque: 326 Nm • Tool Magazine: 60 positions • Features: Driven tools, Full turn-mill capability • Through-Spindle Coolant: 70 bar • Programmable Coolant Pressure (7 steps) • Coolant Through Opposite Spindle • Oil Skimmer • Chuck Washing • Work Area Washing: 4.5 bar • Coolant Level and Pressure Monitoring • Oil Mist Collector Preparation • Hinged Belt Chip Conveyor • Renishaw Probing System (Measuring Head Included) • Automatic Tool Measurement • Radio Tool Measurement System RMP60 • Manual Pulse Generator (MPG) • 3-Color Signal Tower

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Nsdpfjy St Sdjx Akislh Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*