Elevator

Antti-Teollisuus 1922-C

Condition: ready for operation (used), For sale is a complete log yard with long log feed, Nicholson A6/35'' debarker and Baljer Zembrod OBX V-24 bridge crane with up to 200 meters of rail. Hfjdewxndnjpfx Afnec

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately. Hfjdewclkyopfx Afnjc

Condition: used, Year of construction: 1993, Häwa debarking milling machine H249 / 1000 Year of manufacture: 1993 Log diameter: 0.25 m - 1.2 m Log length: 1.8 m - 7 m Milling head: 30 kW Root reducer: 37 kW Hfjdpfx Aex Rv T Iefnsc Consists of: - Cross infeed conveyor - Debarking - Conveyor belts - Outfeed conveyor

Condition: excellent (used), functionality: fully functional, Filter for extraction of dust and sawdust. Hfsdpfstzld Uex Afnsc

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet Hfedewvqkljpfx Afnec • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Year of construction: 1984, condition: excellent (used), Blade diameter: 550 mm Minimum cutting length: 500mm Minimum cutting width: 100mm Maximum cutting height: 160 mm Hodpslrtntefx Afnjfc Minimum cutting height: 40mm Pneumatic clamps

Condition: used, Manufacturer: REWA Hedpfsrk Etusx Afnjfc Type: Solid body auger, with bearings on both sides, Other: without cover, WITHOUT motor and gearbox, with solids pusher Length: 8.00 m Ø screw: 300 mm

Condition: used, Lenght: 1,5 m Widht: 1,5 m Log scanner Elinova 768. Hodehhpbcspfx Afnofc

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 820 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,765 mm, fuel type: diesel, mast type: triplex, construction height: 2,910 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 7,760 kg, total length: 3,748 mm, drive type: Diesel, construction width: 2,080 mm, All-terrain forklift Load center: 600 mm Fork width: 150 mm Hfsdpfex R Hcmsx Afnsc Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Technical condition: good Front tire type: Pneumatic Front tire size: AS 340/80 R18 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: AS 18-22.5 163A8 Rear tire condition: 80 - 100% Description: The M 50-4 all-terrain forklift is designed for operations in challenging environments or areas with obstacles. With 4-wheel drive and a ground clearance of 43 cm, this forklift ensures optimal maneuverability under all conditions. A wide range of tire options is available for adaptation to varied surfaces, optimizing your productivity. The pendulum-mounted cab, accessible from both sides, offers a spacious driver’s area with ergonomic controls. The elevated driving position provides a 360° panoramic view for enhanced safety for both operator and surroundings. Side shift, 3rd and 4th hydraulic valve, work lights (front/rear), cabin heater, full cab, CE certificate. Includes: service booklet, EC declaration of conformity, operator’s manual, spare parts manual.

Condition: used, OPTICUT 260 Manufacturer: Weinig Year: 2023 Min. nominal cross section: 30 x 12 mm Hfjdpfx Asxykfhsfnsc Max. cutting range: 260 x 12 mm (250 x 12 mm)/160 x 80 mm (100 x 100 mm) Max. ingoing lengths: 6300 mm Max. feed speed: 180 – 240 m/min