plate thickness: mm
work piece width: mm
machine weight approx.: 64 kg
dimensions L x W x H: 0,76 x 0,70 x 0,55 m
application: for grinding of 45° bevel approx. 4mm
- grinding disc Ø 430x35mm ( cup wheel disc)
- work piece 2 prisma surfaces L:680 x W:50mm, vertical adjustment 10mm
- power connection 380V with connection cable 4 meter more
Brush deburring machine, sheet deburring machine, deburring machine,
-deburring machine for punching, laser and nibbling parts
-deburring system for sheet edges with notches
-drive Power 0.71 kW
Speed 4500 rpm
-dimensions 400/180/H130 mm
-weight 3,5 kg more
: 900width: 930length: 1900weight approx.: 5,5retainer diameter: mm 1220: m/sec 8-22aggregate for frequency control of speed: m/sec 10-22feed rate: m/sec 1-10: kW 11air requirements of grinding belt aggregate: l/min 70aggregate: kW 7,5feed motor frequency-controlled: kW 2,2electrical connection: Volt 400paper filter pump: 0,8 bar 200tank capacity: 450length paper filter unit: 200quality: micron 30 -50performance of dehydrator: kW 5,3compressed-air: bar 6
1 x edge sanding machine
Ruler length: 370 mm
Sheet thickness: 0 to 2 mm,
max. edge clearance with completely opened rulers 3 mm
Speed: 3400 rpm
grinding wheel 150 x 125 x 42 mm + 125 x 90 x 42 mm
2 x grinding wheel with flange
1 x additional flange
1 x key for grinding wheel change
The machine can be inspected under power. more
From a company liquidation
Assfalg ASO 600-A
acquired November 2016
max. chamfer width 3,0mm
+ suction cup Nilfisk Aero 21 stainless steel
+ Accessories as shown
weight ca.25kg more
Description The universal grinding machines with swivelling grinding unit for long belt and edge grinding of long workpieces For use in the metalworking industry for grinding, structuring and polishing tasks, especially in the stainless steel sector 225 mm large balanced belt rollers ensure optimum and low-vibration drive Stepless belt speed from 4.5 - 27 m/s by frequency former With electrical table height adjustment With split table for opening, Drawer sanding device and integrated worktable l... more
Article number: MA1073
Year of construction: 2002
Length [mm]: 2000
Width [mm]: 700
Height [mm]: 1100
Weight [kg]: Approx. 500
Power supply: 380V
Automatically feed: Yes
Lxw table size: 1200 X 400 mm table 45 degrees inclined holes
Disc diameter: two-sided deburring with one operation as two belts in use are
Accessories: Suction / 2 piece replacement rollers more
Edge sanding machine
Model KSM 130
Year: unknown - work rather than checked
Speed: 2.890 U/min
Max bevel height: 0-3 mm
-used as seen, without warranty-
(Original price: €8.220,--) more
The machine is used for precise satin finishing of flat surfaces, sheet elements. High efficiency and satinizing accuracy allow for use in all metal industries. The satyniarka can work dry and wet, using a special satin liquid mixed with water. In the case of wet satinning the machine has heaters and a ventilation system that dries the sheet just after satinizing. Satyniarka also has the function of sheet metal oscillation.
Standard equipment: control panel, new belt in the conveyor belt, 150 l... more
Machine OMD FMH50. Machine is in excellent condition, it has only been used for 500hrs.
The filters are enclosed in the price. One attached to the machine and two extra.
Also included 16 grinding wheels,
Machine OMD FMH50.
Outside diameter 500mm
Internal diameter 200mm
Width 100mm more
The GRINDMASTER wide-belt grinder, also known as the deburring machine, is an innovative machine in Poland. Machines of this type improve the process of finishing the details burned on plasma, lasers, punched on punching machines and guillotines. On the machined parts in the process of cutting or punching, there are sharp edges, lumber, sludge after cutting with oxides and splinters. Companies have so far handled these problems manually, unfortunately the quality of manual processing is not repe... more
The machine is used in the final processing of details burned on a plasma cutter, laser, punched on punching machines, cut on guillotines, etc. It is used to round sharp external and internal edges as well as polishing or satin. Removes trash, cut residue and all chips. The grinder is equipped with 2 grinding units (abrasive roller and brush roller made of stainless steel). Thanks to the magnetic tape, we can grind smaller parts.
Standard equipment: new sanding paper, control panel, stainless s... more
The Machineseeker Trust Seal gives buyers the ability to detect at a glance whether they are dealing with a trusted seller or not .
What do we verify?
Check of trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of accessibility to main phone number.
Credit report may not contain negative criteria.
Buyer complaints can lead to withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no entitlement to the grant of the Machineseeker Trust Seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.