Rough terrain forklift truck

Manitou M50.4 ST5

Condition: new, functionality: fully functional, machine/vehicle number: M50-4, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,865 mm, fuel type: diesel, mast type: triplex, construction height: 2,910 mm, fork length: 1,200 mm, empty load weight: 8,325 kg, total length: 4,948 mm, drive type: Diesel, construction width: 2,080 mm, Rough Terrain Forklift VIN: M50-4 Fork width: 150 mm Fork thickness: 60 mm ISO Class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Torque converter, all-wheel drive Condition: New Technical condition: New Front tires type: Solid rubber Front tires size: 445/70R22.5 Front tires condition: New Bodpfxowmty Re Alcslh Rear tires type: Solid rubber Rear tires size: 340/80R18 Rear tires condition: New Description: 12-month factory warranty / Max. 2,000 operating hours 3rd valve, 4th valve, rear work light, front work light, soot filter, German Road Traffic Licensing Regulations (STVZO), full cab, full free lift, CE certificate, exterior mirrors, rotating beacon, LED, seat, 3rd & 4th valve. Hose guide to fork carriage, rotating beacon halogen, reversing warning signal, mast tilt valve

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings Bledpfx Aswvqkljlceh All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,850 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,870 mm, power: 55 kW (74.78 HP), motor manufacturer: Deutz, fork carriage width: 1,676 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, front tire type: pneumatic tires (air-filled), front tire size: 18-22.5 MPT-06, rear tire type: pneumatic tires (air-filled), rear tire size: 340/80 R18 XMCL, overall weight: 8,436 kg, total height: 2,490 mm, total length: 4,950 mm, total width: 2,080 mm, color: red, Equipment: CE marking, all wheel drive, cabin, front guard, head guard, lighting, pallet forks, sideshift, === KEY SPECIFICATIONS === Year: 2025 Working hours: 1 h Max. lifting capacity: 5000 kg Max. lifting height: 5.50 m Mast type: Triplex Fork length: 1200 mm Side shift: Yes Drive: Diesel Transmission: Torque converter Cabin: Closed Heated cabin: N/A Tyres: Pneumatic (rough terrain) Stabilizers: No Engine manufacturer: Deutz Emission class: Stage V Weight: 8436 kg CE certification: Yes === HIGHLIGHTS === Triplex 5500 mm mast Side shift Brand new machine 55 kW Deutz Stage V engine 5,000 kg lifting capacity Rough terrain configuration Ready for immediate use === CONDITION === Brand new condition Fully inspected and ready for immediate operation === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price on request (EXW / excl. VAT) Brand new rough terrain forklift designed for heavy-duty applications in construction, logistics, and industrial environments Bedpfx Aloy D Hi Hecjlh Equipped with a triplex mast and side shift for maximum flexibility and efficiency All machines are fully inspected, CE certified and ready for immediate operation === DELIVERY === Crane loading available on request for smooth transport during shipment Flexible shipping options tailored to your destination and logistics preferences All transport is professionally handled by the logistics team of Collé Rental & Sales Prijsresultaten Prijsresultaten kan geen schatting geven omdat we in de afgelopen twee jaar geen veilingtransacties hebben gevonden voor een 2025 Manitou M50-4 ST5 | 2025. U kunt de activadetails verfijnen in Prijsresultaten om meer resultaten te

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,330 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,765 mm, fuel type: diesel, mast type: triplex, construction height: 2,910 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 7,760 kg, total length: 3,748 mm, drive type: Diesel, construction width: 2,080 mm, All-terrain forklift Load center: 500 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: torque converter Speed class: 20 Technical condition: Very good Front tires Type: Pneumatic Front tires Size: AS 340/80 R18 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: AS 18-22.5 163A8 Rear tires Condition: 80 - 100% Description: The M 50-4 rough terrain forklift is designed for work on difficult terrain or with obstacles. With 4 drive wheels and a ground clearance of 43 cm, this forklift offers good maneuverability under all circumstances. A wide range of tires is available to adapt to different terrains. This serves to optimize your productivity. Accessible from both sides, the pivoting cab offers a spacious operator's area with ergonomic controls. The high driving position offers a 360° panoramic view for greater safety for the driver and his surroundings. Bloden Hcw Djpfx Alceh Sideshift, 3rd valve, full cab, CE certificate, -service booklet -CE declaration -operator's manual -spare parts manual

Condition: as good as new (ex-display), Year of construction: 2015, functionality: fully functional, PRIMULTINII SIF 1600 band saw, in very good working condition. Blsdpfx Asyha A Tolcoh

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,190 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,765 mm, fuel type: diesel, mast type: triplex, construction height: 2,910 mm, power: 55 kW (74.78 HP), fork carriage width: 1,670 mm, fork length: 1,200 mm, empty load weight: 7,760 kg, total length: 3,748 mm, drive type: Diesel, construction width: 2,080 mm, All-terrain forklift Load center: 600 Bledpfx Aow Rhb Aslcsh Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: torque converter Speed class: 20 Technical condition: normal Front tires Type: Pneumatic Front tires Size: AS 340/80 R18 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: AS 18-22.5 163A8 Rear tires Condition: 80 - 100% Description: The M 50-4 rough terrain forklift is designed for work on difficult terrain or with obstacles. With 4 drive wheels and a ground clearance of 43 cm, this forklift offers good maneuverability under all circumstances. A wide range of tires is available to adapt to different terrains. This serves to optimize your productivity. Accessible from both sides, the pivoting cab offers a spacious operator's area with ergonomic controls. The high driving position offers a 360° panoramic view for greater safety for the driver and his surroundings. Sideshift, 3rd valve, 4th valve, heating, full cab, CE certificate, -service booklet -CE declaration -operator's manual -spare parts manual

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, Filter for extraction of dust and sawdust. Blodpfx Aotzld Uslceh

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 20 h, load capacity: 8,000 kg, lifting height: 4,800 mm, free lift: 1,570 mm, fuel type: diesel, mast type: triplex, construction height: 2,780 mm, power: 59 kW (80.22 HP), fork carriage width: 2,240 mm, fork length: 2,400 mm, empty load weight: 12,406 kg, drive type: Diesel, Diesel forklift Load centre of gravity: 600 Fork width: 180 mm Fork thickness: 75 mm ISO class: Terminal West Mast type: Triplex Gearbox: Converter Speed class: 20 Condition: New Technical condition: New Front tyres type: Superelastic Front tyres condition: New Rear tyres type: Superelastic Rear tyres condition: New Bjdsxr R Efopfx Alcjlh Side shift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, full free lift, CE certificate, interior mirror, exterior mirror, rotating beacon, seat, front and rear camera

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control CNC SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- INCLUDES extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Blsdsy Hl Iyspfx Alcoh Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Year of construction: 1900, condition: used, Used A2/35“ machine. Minimum diameter 80 mm, maximum 900 mm. Minimum log length 180 cm. The price refers to the machine in its current condition. Feed chains and sprockets can be replaced or supplied by us at an additional cost. Bljdpfx Alewqmyfscoh