Column drilling machine

ALZMETALL AB 3ES

Condition: good (used), Column drilling machine ALZMETALL AB 3 ES from training facility - Well-maintained original condition - Drilling capacity / steel: 35 mm - Throat depth: 280 mm - Table size: 600x470 mm - Drilling stroke: 180 mm - Morse taper MK 3 - Infinitely variable speed control Fpodjycv Tdspfx Afnsc - Drill depth stop - Speed display - Drill chuck - Documentation Dimensions: LxWxH 1.2x0.8x2 meters / Weight 450 kg Errors and omissions excepted.

Condition: used, functionality: fully functional, operating hours: 4,189 h, fuel type: diesel, mast type: duplex, FORKLIFT TCM FD25Z1 IZUSU ENGINE DIEZEL SHORT MAST.....START AND DRIVE..... Fpodpst U Ivtefx Afnoc

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ES Machine No. 21703 Year of manufacture: 1981 Drilling capacity: 32 mm Spindle taper: MK 3 - long quill Throat depth: 290 mm Quill stroke: 160 mm Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 0.9 and 1.3 kW, pole-changeable - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless through variator gearbox - Intermediate gear stage for high torque at low speeds - RPM counter for spindle speed Fodpjvu Dv Hofx Afnepc - Table height adjustable by handwheel - Machine lamp - Emergency stop via foot switch and kick switch - Quick-action drill chuck 1 to 13 mm Space requirement L x W x H: 1200 x 650 x 1900 mm Weight: 400 kg Very good condition Machine tested with 30 mm drill diameter in steel - runs very well

Condition: excellent (used), Year of construction: 1979, Drilling capacity 32 mm Spindle taper MT 3 Throat 290 mm Quill stroke 160 mm Table size 510 x 300 mm Column diameter 115 mm Spindle speed 55 - 1450 rpm, stepless Motor power 0.9 and 1.3 kW, pole-switchable Power connection 380 Volt, 50 Hz Fjdow H Namspfx Afnepc Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless via variator Table height adjustment via handwheel Machine lamp Quick-release drill chuck 1 to 13 mm Required space L x W x H 1200 x 650 x 1900 mm Weight 400 kg very good condition

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost Fpsdpfx Aewudhuefnec • Live center • Coolant pump • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 1975, ALZMETALL AB 3ES Pillar Drill Fpodpfx Afewg Hd Njnec Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Drilling capacity in St 60 35 mm Spindle mount MT 3 Throat 290 mm Quill stroke 160 mm Table stroke 592 mm Column diameter 115 mm Clamping area 510 x 300 mm Spindle speed 130-1750 rpm Machine weight approx. 400 kg Year of manufacture 1975 With coolant system!

Condition: used, Year of construction: 1987, Column Drilling Machine Manufacturer: ALZMETALL Model: AB 3/ES Year of manufacture: 1987 - workshop tested Machine no.: 23348 Standard features: - Infinitely variable speed control from 260 to 3,500 rpm - Analog speed display Fsdpfxjw Id Uas Afnopc - Operating manual Other important technical data: - 28 mm drilling capacity in ST 60 - 160 mm quill travel - Spindle taper MK 3 - 115 mm column diameter - 500 x 300 mm table dimensions

Condition: good (used), working width: 1,050 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, overall weight: 220 kg, working length: 1,050 mm, max. working width: 1050 mm for metal sheets up to: 2 mm opening width top clamping bar: 60 mm Fpodpfx Asui Ikrefnjc weight: 220 kg space needed: 1380 x 550 x 990 mm

Condition: used, Year of construction: 1998, throat 290 mm bore stroke 180 mm total power requirement 1,9 kW Fpodpfx Afew D Hi Tjnsc

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 32 mm throat 290 mm bore stroke 180 mm total power requirement 1,9 kW Fsdpfxew En D Ij Afnepc Description to follow!

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable Fsdpfx Aeg Ip Efofnspc