Pillar Drilling Machine

ALZMETALL AB3/ES

Condition: good (used), ALZMETALL AB 3 ES column drilling machine Pgedpexxh Anjfx Ag Dsw Speed: 80–1420 rpm Spindle: Morse taper 3 Mounted on running gear.

Condition: excellent (used), bore capacity in steel (diameter) 45 mm throat 300 mm bore stroke 160 mm taper MK 4 table surface area 600 x 500 mm table adjustable 550 mm total power requirement 0,8 kW Pgjdpjvn U Umofx Ag Dow weight of the machine ca. 0,5 t dimensions of the machine ca. 0,8 x 0,6 x 1,8 m

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ES Machine No. 21703 Year of manufacture: 1981 Drilling capacity: 32 mm Spindle taper: MK 3 - long quill Throat depth: 290 mm Quill stroke: 160 mm Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 55 - 1450 rpm, stepless Pgjdpfx Asvu Dv Hjg Dew Motor power: 0.9 and 1.3 kW, pole-changeable - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless through variator gearbox - Intermediate gear stage for high torque at low speeds - RPM counter for spindle speed - Table height adjustable by handwheel - Machine lamp - Emergency stop via foot switch and kick switch - Quick-action drill chuck 1 to 13 mm Space requirement L x W x H: 1200 x 650 x 1900 mm Weight: 400 kg Very good condition Machine tested with 30 mm drill diameter in steel - runs very well

Condition: used, Year of construction: 1987, Column Drilling Machine Manufacturer: ALZMETALL Pedpfsw Id Uasx Ag Degw Model: AB 3/ES Year of manufacture: 1987 - workshop tested Machine no.: 23348 Standard features: - Infinitely variable speed control from 260 to 3,500 rpm - Analog speed display - Operating manual Other important technical data: - 28 mm drilling capacity in ST 60 - 160 mm quill travel - Spindle taper MK 3 - 115 mm column diameter - 500 x 300 mm table dimensions

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 850 mm turning dia. over face-slide: 580 mm turning length: 4000 mm centre distance: 4000 mm faceplate diameter: 800 mm Pgsdpou Ix Izsfx Ag Dsw control: Siemens 810D revolution per minute: 1 - 1600 / 2 step U/min max. torque on the spindle: 6000 Nm feed motor: X= plan + Z= längs: 16000 / 20000 N rapid motion - x-axis: 4 m/min rapid motion - y-axis: 7 m/min spindle passage: 130 (Spindelkopf DIN 55027 Gr. 11) mm operating hours - idle run: werden noch ausgelesen h tailstock taper ISO: MK 6 tailstock quill stroke: 350 mm max. workpiece weight between centers: 5000 kg max. workpiece weight -without tailstock: 1800 kg interface: RS 232 / V24 voltage: 400 V / 50Hz V control voltage: 24 V Gleichstrom V total power requirement: ca. 52 kW Weight approx.: 14,0 t dimension machine xH: 2,6 x 9,1 x 2,5 m Cycle lathe with Siemens cycle control Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536.1 Nm Feed drive Three-phase servo drive 2x chip conveyor Double E-cabinet Quick-change steel holder parat Coolant device incl. various accessories see photo, as well as steady rest and 3-jaw chuck Ø 500mm Rota-S plus *

Condition: excellent (used), Year of construction: 1979, Drilling capacity 32 mm Spindle taper MT 3 Throat 290 mm Quill stroke 160 mm Table size 510 x 300 mm Column diameter 115 mm Pedsw H Namjpfx Ag Djgw Spindle speed 55 - 1450 rpm, stepless Motor power 0.9 and 1.3 kW, pole-switchable Power connection 380 Volt, 50 Hz Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless via variator Table height adjustment via handwheel Machine lamp Quick-release drill chuck 1 to 13 mm Required space L x W x H 1200 x 650 x 1900 mm Weight 400 kg very good condition

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 32 mm throat 290 mm bore stroke 180 mm total power requirement 1,9 kW Podew En D Ispfx Ag Dsgw Description to follow!

Condition: new, Year of construction: 2024, Description High quality galvanized steel housing Powerful, economical engines Standard optional intake connection at top or bottom Uniform filter bags for all variants Discharge in chip tons The modular models of the AL-KO AAS series are available in optimally matched performance categories with energy-saving and quiet motors that drive the fan on the raw air side and thus generate particularly effective overpressure filtering. Durable quality components and an all-metal housing made of galvanized sheet steel give you investment security as well as the many retrofit options. The particularly favourable price and short installation times also contribute to the fact that the AL-KO AAS is definitely the right choice. Technical data AL-KO AAS 3013 Suction port 200 mm Nominal capacity 2.500m³/h Maximum volume flow 3.300m³/h Podjfc A Urepfx Ag Degw Maximum negative pressure 2,700 Pa Filter area 3 x 2.2 m² Chip collection volume 3 x 175 litres Engine power 3.0 kW / 400 V Dimensions (LxWxH). 2486 x 578 x 2115 mm Weight: 139 kg

Condition: good (used), Column Drilling Machine ALZMETALL AB 3 ES - Drilling capacity / steel: 35 mm - Throat depth: 280 mm - Table size: 600x470 mm - Drilling stroke: 180 mm - Spindle taper: MK 3 - Infinitely variable speed control - Drilling depth stop - Speed indicator - Drill chuck - Documentation Psdpfx Agsw Dcmbo Djgw Dimensions: LxWxH: 1.2x0.8x2 meters / Weight: 450 kg Subject to errors and input mistakes.

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 28 mm throat 290 mm bore stroke 180 mm table surface area 515 x 300 mm spindle taper MT 3 spindle turning speed range 65 - 1750 U/min boring spindle diameter 40 mm table adjustable in height 562 mm table swivelable 360 ° distance between table/spindle 79 / 641 mm Pgedpfxjwk N Rae Ag Djw weight of the machine ca. 0,4 t dimensions of machine L x W x H 0,70 x 0,40 x 1,80 m - machine out of teaching shop -

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 200 mm Psdov Ehftepfx Ag Dsgw table surface area 720 x 5 mm

Condition: excellent (used), Year of construction: 1975, ALZMETALL AB 3ES Pillar Drill Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Drilling capacity in St 60 35 mm Pedpfxewg Hd Ns Ag Djgw Spindle mount MT 3 Throat 290 mm Quill stroke 160 mm Table stroke 592 mm Column diameter 115 mm Clamping area 510 x 300 mm Spindle speed 130-1750 rpm Machine weight approx. 400 kg Year of manufacture 1975 With coolant system!

Condition: excellent (used), Year of construction: 1976, ALZMETALL AB 3ES Pillar Drill Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Pgodowg Hdvjpfx Ag Dow Drilling capacity in St 60 35 mm Spindle mount MT 3 Throat 290 mm Quill stroke 160 mm Table stroke 592 mm Column diameter 115 mm Clamping area 510 x 300 mm Spindle speed 130-1750 rpm Machine weight approx. 400 kg Year of manufacture 1976 With coolant system!

Year of construction: 1970, condition: good (used), machine/vehicle number: Unbekannt, QUOTE Technical data: Pgedpfxehglvko Ag Dsw - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle mounting MK 3-long spindle - drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable approx. 140 - 1600 rpm - 3 feeds 0,1 ; 0,2 ; 0,3 mm/rev - throat 290 mm - max distance table - drilling spindle 620 mm - rotary table with 2 T-slots 450 mm - Height adjustable via toothed rack with hand crank - Coolant device - Drive 380 V / 0,9 / 1,3 kW - Space requirement approx. W 750 x H 1900 x D 700 mm - Weight approx. 280 kg