Eccentric press

ABM PREN-100

Condition: new, pressing force: 100 t, stroke length: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm - Cylinder is movable - Can be operated electrically or manually - Pressure indicator Nwedpfx Agegp Dc Rsnsc - Emergency stop - 400V

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank Nwjdpfx Aog U Utvjgnec via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right Njdpfshlnzkjx Agnewc space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Year of construction: 1980, condition: used, pressure 80 t Njdpjdlcy Hofx Agnewc throat - mm stroke 50 mm table surface area 875 x 695 mm ram surface 350 x 355 mm ram adjustment 71 mm no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t dimensions of the machine ca. 2,0 x 2,1 x 3,2 m daylight (stroke down, ram adjustment above) 480 mm Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state After the partial overhaul, the machine is safe for manual insertion open tool, a current UVV test is carried out before delivery and braking time measurement.

Condition: used, Year of construction: 1969, max. wheel diameter 160 mm gear width 355 mm max. module 4,5 min. module 0,5 centre distance 450 mm total power requirement 11 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2x17,1,6 m Wheel diameter - max. 160.175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Center distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Center distance between milling cutter and workpiece - max. 138 mm Center distance between milling cutter and workpiece - min. 30 mm Milling head - swivels 120 ° Nwsdpovz Ec Ijfx Agnoc Milling cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Changing wheels - milling arbors - Clamping device Dra8M7 - documentation

Condition: used, Double-column Eccentric Punching Press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with ALBA roller feeder Njdpfx Agsdzqlvjnswc Machine No. 88151005 Year of manufacture 1988 / 92 Press force 160 tons Column width 970 mm Column width (lateral) 560 mm Table size 900 x 900 mm Ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/minute Strip width in roller feeder max. 400 mm Motor power approx. 15 kW Power supply 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Semi-automatic stroke adjustment - Ram weight balancing cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch-brake combination - Centralized oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Switch cabinets for the press and feeder, jointly mounted on a platform next to the machine Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Press width without feeder 2100 mm Press depth with drive motor 2300 mm Overall press height 4150 mm Net weight of punching press approx. 18 tons For transport, the drive motor is disassembled and the machine is laid on its side. Included: NC Roller Feeder-Straightener ALBA Type GGVHY400 Equipment No. 1405 and 1406, Order No. 910708 (year 1992) - Feeder control ALBA PSS 300 - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross-section max. 1200 mm² - Roller drive of the feeder hydraulically controlled - Height-adjustable feeder unit at the press for material entry height adaptation - Hydraulic unit positioned next to the line - Straightening unit with hydraulic opening and closing Weight of the complete system approx. 24 tons Transport space required: one megatrailer with 3-meter internal height and 13.6-meter loading length Good condition

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above Nodpfjg Rn Efsx Agnewc 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Without transport costs.

Year of construction: 2009, condition: used, material width 320 mm material thickness 8 mm no. of straightening rolls 9 material cross-cut 2000 mm² weight of the machine ca. 4,2 t dimensions of the machine ca. 2000x2000x2400 mm Nedpfx Aep U Uwijgnswc

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.15, Fresan FP 130P - C Frame Eccentric Press - 130 Tons (1300kN) TECHNICAL DATA: * Power: 130 tons (1300kN) * Strokes Per minute: 55 (variable) * Ram-Table Distance: 500 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve Nodpfx Aonyh Siognewc * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, Year of construction: 2025, Band width: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 rpm at full feed length Feed force: 90 N Nwjde Ea U Hspfx Agnoc Optionally with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.