Workshop press

AYEL-TECH WP-HD 100

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Gujdpekvnumofx Amusb Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), 3000 kg welding rotary table, hydraulically height adjustable Speed 0.05-0.6 U/min Table diameter 1200 mm Inclination 0-120° Total height 700 mm Height adjustment with vertical pane until the mid- 960 mm ~ 1910mm Horizontal disc mass 1200mm up to 1900mm Guedpfx Amodvn E Usujb

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit Gsdjxmirgepfx Amuoub - Chip conveyor - Documentation - CE marking

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm Guedpfx Amehpktvjueb saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm Guedpfx Amshlnzkjuob slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Year of construction: 2014, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✨✨Buy directly from the manufacturer and secure your price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ————— ✅System contents ►1 unit - Large, gas-heated powder oven ►1 unit - Automatic powder coating booth ►1 unit - Small, electrically heated powder oven ►2 units - Room-type mono-cyclone manual powder coating booth ►6 units - Automatic powder coating guns ►3 units - Manual powder coating guns ►1 unit - Automatic powder recovery unit ►6 units - Mono-cyclone separators ►1 unit - Automatic control panel ►1 unit - Automatic bar movement system (speed controlled) ►2 units - Mobile platforms (speed controlled) Gusdpfxsiivq Us Amusb ►8 units - Parking stations ►300 m - Conveyor rail, 1000 kg capacity ►12 units - Suspension bars Our facility is located at Anhaltstr 30, 14943 Luckenwalde. You are welcome to schedule an appointment to view the machines. The plant has been in operation for 10 years. As the direct manufacturer, we can modify the machines according to your requirements by mutual agreement. It doesn’t fit your existing installation site? We can adjust the layout accordingly. Please check the system’s PDF file via the link below.

Condition: excellent (used), Year of construction: 2011, Control system MXS 850 IV Data: Max Swing over bed 755 mm Max swing over support 740 mm Max Turning diam. 366 mm Turning length 785 mm Movements X 260 mm Y 100 +-50 mm Z 795 mm Rapid transport X/Y/Z 30/20/50 m/min Guedpfxjyilzhe Amueb Spindle power 26/22 kW Spindle speed 4,000 rpm Bar Capacity 80 mm Chuck diameter 250 mm Spindle nose JIS A2-8 Spindle indexing 0.001° Sub Spindle power 11/7,5 kW Sub Spindle speed 6,000 rpm Sub Bar cap. 80 mm Sub spindle Chuck diameter 150 mm Sub Spindle nose JIS A2-5 Sub Spindle indexing 0.001° Number of tools in turret/driven 12/12 pcs. Power driven tools 5.5 kW Spindle speed driven tools 6,000 rpm Machine weight 6,200 kg Machine dimensions LxWxH 4.34 x 2.00 x 2.120 m Equipment: Chip conveyor, 3-jaw chuck Kitagawa BB-210 in main Spindle and a Kitagawa B 206 in Sub Spindle, Part catcher, Various tool holders, Parts catcher, Interface for Bar-Feed, Synchronised threading, The machine has 17800 work hours.

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Model 100 TON M/H-M/C-2 Year 2025 Guedpfsxwk E Asx Amusb Condition New Stock Number 2796 Working Width 1000 mm Stroke 380 mm Max Capacity 100ton

Condition: used, Year of construction: 2007, pressure 100 t stroke 500 mm table surface area 900 x 600 mm rapid traverse 22 mm/s stroke speed 2 mm/s ram surface 700 x 350 mm Gjdpfx Amovprv Rousub total power requirement 2,2 kW weight of the machine ca. 1,6 t dimensions of the machine ca. 1,9 x 0,85 x 2,3 m The machine is of the Italian make SICMI, which was traded by the Knuth company.

Year of construction: 2019, condition: used, Technical details: control: Sinterit Studio 2019 Open voltage: 220/50 V / Hz total power requirement: 1,0 (max. 1,8) kW weight of the machine approx.: 90 kg dimensions: 690 x 510 x 900 mm SLS Laser System IR Laser Diode 5 (W) Max. Print distance diagonal: 316mm Flexa/TPE - high accuracy max. print volume 110 x150 x 250mm PA - high accuracy max. print volume 90 x130 x 230mm X/Y accuracy: 0.05mm table size/working space: 150 x 200 x 260mm built-in nitrogen chamber nitrogen consumption: 0,48 m³/h Gsdpfx Amou N Auueusub heating system with max. chamber temperature: 200°C Accessories: Glass plate (Laser Protective Glass) 1x USB (software accessible), Software Sinterit Studio 2019 open, supported formats STL,OBJ,3DS,FBX,DAE,3MF, operating system MS Windows Light source (Set of Infrared heaters 24V) various bottles with polyamide powder div. small parts *