Four-sided planer

A. COSTA MELANTO

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, planing height: 300 mm, planing width: 450 mm, overall weight: 5,300 kg, the machine in very good condition, original paint, maximum profile 450mm x 300mm Predpfx Asxk S S Rja Ejf

Condition: new, Year of construction: 2025, operating hours: 10 h, Engine: CUMMINS - US EPA Tier 4 final, water-cooled, with electrically heated water separator with 24V fuel pre-filter and air filter pre-cleaner - Diesel particulate filter (DPF) - Eco-switch for diesel engine - Cooling fan with reversing function for cleaning the radiators - Automatic central lubrication for attachment and slewing ring raceway - Pinion-tooth lubrication for slewing ring - Emergency control to ensure machine availability during restricted operation By bypassing the main functions Pedpfx Aaewb Dnzo Esrf - Joystick steering Undercarriage Mobile undercarriage with 4-point support. All-wheel drive Solid rubber tires 12.00-20 (8-way). Cabin Adjustment Cabin adjustment TYPE 270 for SENNEBOGEN MAXCAB. Hydraulically liftable up to approx. 2.7 m Cabin and Equipment MAXCAB Industrial with sliding door including a one-piece, straight windshield with armored glass. Armored glass cab roof window Cab protective grille at the front and top Automatic climate control Air-suspended comfort driver's seat with climate control, seat heating, and headrest Fully adjustable multifunctional armrests for the driver's seat 2-inch safety belt Radio/USB/MP3 and Bluetooth function Position slewing gear brake Interior sunshade for roof hatch and windshield Uppercarriage options Additional counterweight 0.6 t SENNEBOGEN Hydro Clean filter Safety railing Platform next to the cab with railing (bolted) Railing on the uppercarriage, foldable for transport Work equipment Type K18 transfer equipment consisting of: Compact boom 10.1 m and stick 7.9 m Lift and stick cylinders with end-of-stroke damping Hose rupture protection for lift and stick cylinders Limit switches for lifting/lowering and boom on/off Boom damper reduces sway and dampens abrupt movements. SENNEBOGEN 20 kW, 230 V generator system for diesel machines, 100% duty cycle, maintenance-free Safety circuit against short circuits and overloads, insulation monitoring 4-pole generator, hydraulically driven, can be switched off when not in generator mode without hydraulic power loss, control and display unit in the cab. Basic lighting package: Two H4 recessed headlights in the upper frame at the front left and right, two taillights and two headlights at the front left integrated in the cab roof. LED work light with magnetic attachment and 5 m cable for flexible positioning in the maintenance area. Camera system - Basic package with 2 cameras includes: 1 7" color monitor with 4-way split screen, expandable to a maximum of 4 cameras, 2 color cameras with a 115° field of view for the rear view camera and the right side of the machine. Additional lighting package 1: One spotlight mounted on the uppercarriage One LED work light Additional lighting package 2: Two LED spotlights on a pole Two LED spotlights on the boom One LED spotlight on the counterweight Rotating beacon

Condition: used, Year of construction: 2004, functionality: fully functional, cutting length (max.): 8 mm, Equipment: cabin, Complete Artiglio log saw with Eagle 1100/I carriage. It has been maintained by Artiglio in 2018. It is in excellent condition. Prsdpfx Asv Sr U Eja Eof

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Pedpeu Atmujfx Aa Eerf Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), power: 115 kW (156.36 HP), fuel type: diesel, color: green, Year of construction: 2021, operating hours: 4,800 h, General information Year of manufacture: 2021 Field of application: Construction Serial number: 818.0.2803 Technical information Number of cylinders: 4 Empty weight: 19.000 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Other information Emissions class: Stage V Podpjt Dlulsfx Aa Esrf Additional information Please contact Ferdinand Pater for more information Stock no. D28 Machine Brand Sennebogen Type: 818ME-series Weight: 19 Ton Serial number: 818.0.2803 Building year: 2021 Worked hours: 4700 Engine: Cummins QSB 4.5 Stage V 115kW at 2200rpm Boom: K9 ULM, 5.3 meter boom, 3.8 meter grab stick with ULM Cabin: Maxcab, Hydraulic Cab Riser, 2,7 m. Upper carriage: Standard Sennebogen color, complete new spray paint, Central greasing system Undercarriage: Mobile, 8 full rubber tires 10,00-20 with 4 outriggers Lights: Several (LED) lights on boom, stick and cabin Extra: Machine is serviced and clean, ready for work

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 Prodpfxsk Egrpo Aa Eef - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment Pedjwrw D Ropfx Aa Eorf six upper pressure rollers pneumatic clamps five anti-ejection pawls ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW dimensions (length / width / height) - 7050 / 2100 / 1850 mm

Condition: good (used), Year of construction: 2008, machine/vehicle number: 21100122-F, Offer 25108 Technical Data: Podpfx Aaowq N Swo Esrf - Saw blade dimensions 350 x 3.4 x 32 mm - Saw blade speed 3400 rpm - Cutting range at 90° round 120 mm - or flat 105 x 105 mm - 180 x 70 mm - at 45° round 110 mm - flat 135 x 60 mm - Bevel adjustable left + right 45 ° - Tiltable bevel adjustment of the saw head for ship cuts left - Pneumatic vises - Discharge – roller conveyor with length stop 2000 mm - Feed – roller conveyor 3000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 600 x H 1730 x D 1200 mm - Weight approx. 180 kg

Condition: new, Automatic mitre saw UK-450 - Saw blade diameter 450mm - Processing length according to customer requirements - autom. positioning - automatic mitre adjustment (up to +/- 60°) - Range of application: Wood, plastic and aluminium processing - Feed conveyor as smooth conveyor (optionally as roller conveyor) Further technical details and details on request. Prodpfxed A Ttxe Aa Esf

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Podpjudxchefx Aa Eorf Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).