Automatic planing and profiling machines

A. COSTA MELANTO MELANTO

Condition: used, - Working width (mm): 140 - Shafts: 7 1st shaft: bottom 2nd shaft: right 3rd shaft: left Bodpfx Aforg Exremsww 4th shaft: right 5th wave: top 6th wave: bottom 7th wave: uni-wave

Condition: good (used), Year of construction: 2017, working width: 310 mm, power: 32 kW (43.51 HP), Cross Profiling Machine / End Profiling Manufacturer: Marinus Model: Powermax Endmatcher 300 Year of manufacture: 2017 Well-maintained machine, sourced from a parquet manufacturing facility The Powermax Endmatcher is designed for end processing (tongue and groove machining) of floorboards, decking boards, and cladding profiles in a through-feed operation. Workpiece width: approx. 60 – 310 mm Workpiece length: min. approx. 450 mm Workpiece thickness: approx. 10 – 45 mm Control via touch panel at the machine infeed Bsdpfxsy H U Upo Afmsww Air pressure: 6 bar Power supply: 400 VAC / 50 Hz Total connected load: 32 kW Dimensions: approx. 3000 x 1800 x 2000 mm (L x W x H) Weight: approx. 3500 kg Some information taken from the manufacturer's brochure.

Condition: used, - Adhesive application with 1 profiled roller for Packaging height 300mm over 1 application roller - The drive via worm gear motor 0.37 kW - 1 ST left - 1 ST right - Fits DIMTER HK 200 and HK 400 spare parts dimter in stock equipment in stock Bwsdpfxocht Nyj Afmjw accessories in stock

Condition: good (used), Year of construction: 1994, Complete sawmill: Loading system + bandsaw 1100, blade 130 mm + hydraulic log carriage model EO 700 + 1 outfeed Bjdpfjy Iuuxex Afmsww

Condition: good (used), functionality: fully functional, Chain mortiser LS 102 Rated power: 1800 W Rated voltage: 230 V, 50 Hz Rated idle speed: 4050 rpm Mortising depth: 100/150 mm (depending on the chain set) Adjustable cross stop, steplessly adjustable from 8 to 150 mm Weight of the base unit: approx. 9 kg Slotting machine SG 500: Slotting depth, vertical/horizontal: 500 mm Slot width: 10-17 mm Slot length: 50 mm Weight: approx. 32 kg including guide rail + chain Guide frame FG 150 for mortising depth up to 140 mm Bodpfxjzi A Ele Afmsww

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Bwodpfxey R Tdws Afmsw

Condition: good (used), Year of construction: 1973, Weinig planer 4-sided / U250 / Unimat 250 planing width: 250mm Planing height: 120mm Spindle bottom 7,5 kW Bwedjrigq Sspfx Afmow Spindle right 5,5 kW Spindle left 7.5 kW Spindle right 7.5 kW Spindle top 7.5 kW Spindle bottom 7.5 kW Spindle sawing unit 7.5 kW with planing heads with milling tools with knives with all accessories good condition - available immediately Location: Austria, near Sankt Pölten

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Bodjy Sf Ukjpfx Afmjww Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: used, Year of construction: 2023, functionality: fully functional, CLT Cross-Laminated Timber (CLT) production line with CNC machining center Bwedpfx Aoxzy N Ssfmow Capacity: approx. 25,000 m³/year (2-shift operation) Functional Description / Scope of Supply: - Longitudinal lamella feeding: Loading – Singulation - Cross lamella feeding: Loading – Vacuum destacking – Feeding to planer - Formation and buffering of longitudinal layers: Longitudinal layer preparation and discharge station - Formation and buffering of cross layers: Two-stage cross layer buffer – Cross layer discharge station - Layup and gluing area: Vacuum layup gantry – Adhesive application gantry – Layup table - CLT press: TimberPress X331 - Outfeed area after CLT press: Cross transfer carriage to buffer stations, Reichenbacher system and discharge station with flipping unit - Reichenbacher CNC machining center CLT blanks (LxWxH): Min.: 6,000 x 2,000 x 60 mm Max.: 12,040 x 3,140 x 350 mm 3–9 layers Raw material: Longitudinal layers (LxWxH): Min.: 6,000 x 100 x 20 mm Max.: 12,040 x 280 x 50 mm Cross layers (LxWxH): Min.: 2,000 x 105 x 23 mm Max.: 3,140 x 285 x 53 mm Price and further information available on request.

Condition: used, Costa multi-blade saw -Type Lince -max. cutting height 140mm -motor 30kW Bedpfx Aovw Rplefmsww