Condition: used, Year of construction: 1987, used, good conditionmake Panhanstype 261year of construction 1987machine-Nr. 1129Motor 2,55 7,5 kWmotorized brakeclamping height 210 mmdiameter 40 mmcrosscut sawfence turnable with turret stopfence ruler 1900 mmworkpiece clamping pneumaticsuction connection 80 /200 mmspace requirement approx. 1700 mm x 1800 mm x 1800 mmweight approx. 900 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery as is, as viewed,without guarantee and warranty Cjb Hb Hzovwfrhoverb

Condition: used, Used control cabinet of a Weinig type Unicontrol 6 as a spare parts carrier or for the new construction of a control cabinet. Contents include: * Brake device Hilger and Kern * Transformer Rathgeber type ET 1000. Crsb Hst Na Drsb Hzvjb

Condition: ready for operation (used), Year of construction: 1993, SCM Method K electronically controlled window production system Creb Hb Hjvxvg Sjzvsb The machine will be in use until February 18, 2025 and can be inspected in operation until then Condition Ready for use, always serviced by SCM Technical data see brochure Without milling tool. Available for an additional charge Year of manufacture 1993 Price 4500.-

Condition: used, Year of construction: 2020, Bore diameter , mm Number of heads horizontal , St. Number of heads vertical , St. Weinig Unipin 200 with parapet gluing ----- Dowel driving machine with automatic gluing ! Sold on behalf of a customer: Only around 40 operating hours, no longer required due to product changeover! Manufacturer description: ----- Weinig UniPin 200 for driving in dowels on the front after automatic glue application Workpiece clamping pneumatically via hand switch after manual presetting (handwheel). Room conditions ----- Temperature: In operation: from 15 to 30°C Out of operation: from 15 to 30°C During storage and before installation: from 5 to 40°C - +/- 5% Relative humidity (without condensation): In operation: from 10 to 70% - +/- 10% Out of operation: from 10 to 70% - +/- 10% During storage and before installation: from 0 to 90% - +/- 5% Altitude In operation: from 0 - 1500 m above sea level Technical data ----- Total connected load approx. 1.5 KW (2.0 HP) Full load current: approx. 3 A Pre-fuse: max. 10 A Air consumption/standard: 80 l/min /Blow-out device: 150 l/min Operating pressure: supply 8 bar Operating pressure: UniPin 6 bar Permissible workpiece dimensions: Width: 260 mm Height: 150 mm Dimensions Base area: 1050 x 2150 mm Working height: approx. 1000 mm Permissible dowel dimensions according to DIN 68150 Diameter 8 mm +/- 0.2 mm Length 60 mm +/- 1 mm Cobou Uvbio Hb Hzverb Dowel feed via vibration conveyor Dowel diameter: 8 mm Filling quantity: 500 pieces Pressing force: max. 1000 N Glue system ----- Standard container: 30 liters Glue pressure: up to max. 50 bar For processing B4/D4 glue, one-component according to DIN 68602 / EN 204 suitable. Pump control system made entirely of V4A steel Viscosity at 25°C < 5000 m Pascal Viscosity at 20°C < 4000 m Pascal Standard equipment ----- Electronic dowel driving depth monitoring The driving depth of the dowel is indirectly monitored electronically via the end position of the driving cylinder. If the end position of the driving bolt is not reached during driving, the machine is stopped and a message is displayed on the operating terminal. Prerequisites: - Part must lie cleanly on the zero edge. - Dowel must correspond to the preset length Electronic glue monitoring consisting of monitoring the nozzle needle and pressure difference at the glue nozzle. Advantage: Ensures the gluing function The machine is stopped if there is a malfunction in the gluing function and a message is displayed on the operating terminal. The customer is responsible for maintaining the quality of the corner strength of the corner connection. Weinig accepts no liability for compliance with the quality standards of the corner connection Parapet gluing ----- Contactless application of glue dots to the front of the workpiece with a pulse valve. The dot size can be set by the nozzle opening time and or by means of the glue pressure. The rows of dots must be transferred from the customer’s computer program. The first and last dots in the respective horizontal line are described. The distances between the glue dots are calculated automatically by the control system. Optionally, a maximum dot distance can be transferred in the data set. ...

Condition: good (used), 3 vertical cylinders 2 horizontal cylinders 3500 width 1850 mm height Crob Hbjvcnluj Hzvjb

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, we are selling complete wood-aluminum window sash line. Sash production line consists of: 1. wood package lifter with roller track (4X1250kg) Crob Hb Hju Hgi Dezveb 2. 9 edge planer Leadermac lmc 923 Hypermac (year of construction 2012, maximum width 230mm) 3. Pedolin processing center( year of construction 2003, Cuts optimized details according to the program, mills and installs locking points, mills mullion joint, drills mounting holes.) 4. Primer paint chamber( 4X wagner GA250Al spray guns, Wagner Cobra high pressure pump) 5. Drying chamber

Condition: used, Year of construction: 2007, from training workshop, public facility, chrome-plated stops and machine table used, top condition, hardly used, top equipment Make Weinig Type Unimat 300 Year of manufacture: 2007 Number of spindles 5 Spindle arrangement u-right-li-o-b Motor brakes Planing width approx. mm 20-230 Planing height approx. mm 8-160 Spindle diameter mm 40 Table length approx. mm 2000 Pre-milling cutter Pneumatic pressure of the rollers Protective cover Table lubrication lubricant pump Feed in front of the planer Feed speed continuously variable 5-30 m/min. Profiling D 125 - 200 mm Electrical adjustment of thickness shaft Digital displays complete. incl. profiling Creb Hevwghkjb Hzveb Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition, as inspected, without guarantee or warranty

Condition: used, CNC-controlled, combined tapping, slotting and rebating angle system Weinig UC 12, for the flexible production of Crsb Hb Holfdw Eszvsb various windows, elements and doors without changing tools. Frame by frame, series or individual parts production, Including tool set Oertli IV 78 & 88. Aggregates: 1. Crosscut saw: ø 40 mm, 3 kW 2. Tapping and slotted spindle: Clamping length: 640 mm, ø 50 mm, adjustment range: 580 mm, 15 kW 3. Profiling spindle 1: Clamping length: 400 mm, ø 50 mm, adjustment range: 350 mm, 11 kW 4. Profile milling unit, horizontal from above, 3.7 kW, ø 40 mm, clamping length: 40 mm 5. Profiling spindle 2: Clamping length: 400 mm, ø 50 mm, adjustment range: 350 mm, 11 kW 6. Profiling unit, vertical right, 3.7 kW, ø 40 mm, clamping length: 160 mm 7. Profiling unit, horizontal from below, 3 kW, ø 40 mm, clamping length: 125 mm · NC controlled axes Working width: 28 – 140 mm · Working height: 40 - 120 mm · Workpiece length max. approx.: 3,500 mm Vario table with studio window setup · CNC controlled length stop Rung support bar · Milling package + milling carriage · Nexus controls Slat conveyor incl. conveyor belt for automatic turning and return transport to the operator Including tool set Oertli IV 78 & 88.

Condition: used, Leitz HM - IV 66 window set with faceplate and front door set. Sold in "as is" condition, tool has not been resharpened, Cobjhzgy Ne Hb Hzvsrb ex location Seevetal, without transport, subject to prior sale,

Condition: new, Bore diameter variabel mm Number of heads horizontal 1 St. Number of heads vertical 0 St. 1 Götzinger dowel gluing and insertion machine BLE With the BLE, the workpieces are glued and dowelled on the front. Optional the BLE can be upgraded with a drilling unit, counter milling unit and longitudinal stop will. A 10" touch panel allows easy operation for manual or online operation. Base frame: in a compact design, covered with sheet metal Table support approx. 800 x 200 mm position 1 ----- 1 glue station full jet valve Glue quantity precisely adjustable Glue gun for counter hole gluing position 2 ----- 1 stainless steel glue pump, high-pressure pump and glue hose Crjb Hbsu Uu Uzo Hzvsb item 3 ----- 1 press-in station with dowel separation and press-in cylinder item 4 ----- 1 oscillating conveyor for dowels d 8 x 50 mm with feed hose into the injection unit item 5 ----- 1 processing unit with cross table, linear guide and 3NC axis motors X = 200 mm processing width Y = 120 mm processing height Z = 50 mm offset item 6 ----- 1 positioning controller Touch panel 10" color 500 drilling patterns can be created and saved, which can be easily accessed when needed (1 drilling pattern can have up to 16 dowel positions) Software prepared for ONLINE connection With online control, the data for the control must be provided by the software be prepared. Our machine can then read and process this data. ----- Total price in this version Pos. 1 to Pos. 6: on request! Options with additional prices: ----- item 7 ----- 1 horizontal drilling unit, 1,000 W drilling motor Speed ??4,000 - 8,000 rpm, collet holder Pneumatic drill feed Surcharge: EUR 4,305.00 Additional accessories such as a larger touch screen, additional dowel station for additional dowel sizes or scanner for Program selection on request! Prices net plus statutory VAT, without packaging/shipping and without Installation. (technical data according to the manufacturer - without guarantee!)

Condition: excellent (used), SCM automatic tenoning machine 320/50 saw 10 HP 4 positions Csb Hovcm Tksb Hzvsrb

Condition: as good as new (ex-display), Year of construction: 2025, New Optimizing saw SALVAPUSH 2000 by SALVAMAC The automatic optimizing saw SalvaPush_2000 is born from over twenty years of experience in wood optimizing saws. Creb Hb Hsfhtb Njzvob The operator has just to mark the quality of the wood and the presence of defects, the optimizing saw will do the rest. The machine cuts the best possible combination of measures, reducing waste to a minimum and improving productivity, all in total safety. SalvaPush_2000 is a numerically controlled optimizing saw with integrated computer and SALVA-OPTIM software to have a quick and easy communication. Some sections of the program are dedicated to statistic and cutting results, with updates in real time and diagnostic. The touch screen, with USB and teleservice connections, facilitates data reading and typing. From an idea of Salvador Christian.

Condition: excellent (used), Roller conveyors in lengths 5000 +6000 mm width 600mm with felt or oil tracks for laying. Crsb Hemt D Raob Hzvjb several times available! Please request

Condition: used, suitable for UNITEC 10 or similar, Cjb Hb Hslkckmozvorb BJ 1998 CNC motor controlled, Number: 2 Price per piece: €2,000.00 + VAT

Condition: used, Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-150 mm Hess Junior single wood sander ----- basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated bracing for optimal vibration damping. Staggered grinding units with large dimensioned Belt drive drums for slip-free belt travel. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet belt run. All guides as a ball linear set on hardened and polished waves. Lasting precision thanks to protection against dust and dirt of the sphere linear sets. Contact roller and sanding pad in a balanced ratio to the grinding belt grain load. The large dimensioned drive drums guarantee the full transmission of the 5.5 kW drive power of the grinding motors on the grinding belt. This means the strongest chip removal possible. Automatic machine stop triggering if the tape breaks. Optical display on control panel. Sanding shoe for finish made of special material with optimal Heat dissipation and additional sliding lining. Easy to use pad change. Abrasive belt tension over appropriately dimensioned compression springs. Sanding belt relaxation for belt change by means of pneumatic Device for sensitive, distortion-free loading of new tapes. Upper Grinding unit and brush device (additional equipment) centrally motorized adjustable. Timber guide in the entry area for hard guide and guide rails supported on both sides Ceb Hb Hzet Tqylovorb pinch rollers. Tilt-proof transport of profiled workpieces calibrated conveyor belts with continuously adjustable feed rate. Automatic machine stop triggering by wood thickness control device. Optical display of the control panel. Infeed table via fine, precise threaded spindle for lower Grinding chip removal manually adjustable via scale (resolution 0.1 mm). The length Column table guidance guarantees an absolute parallel adjustment. The Adjustment of the flight circle to the outfeed table is achieved by adjusting the height of the lower one Grinding unit via precise threaded spindle and scale display (resolution 0.1 mm) accomplished. Clear, user-friendly arrangement of all electrical functional, operating and display elements on the front of the machine: grinding unit below, Grinding unit above, workpiece transport device, Grinding thickness setting, brushing device above/below, belt utilization, Operating display, fault display. All motors are against overload electrically secured. Technical specifications : ----- Sanding belt speed: 25 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 150 mm Shortest workpiece length: 280 mm Feed speed, continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm width, 1850 mm length Electrical equipment according to VDE Electrical connection : 400 V., 3/N, 50 Hz. Pneumatic connection: R 3/8", 6 bar, 80 NL grinding units: 2 x 5.5 kW feed: 0.75 kW height adjustment : 0.18 kW Pneumatic connection: R 3/8", 80 NL, min. 6 bar, max. 8 bar Extraction air quantity: 2 x 2000 to 2500 m3/h 20 - 25 m/sec. Extraction connection piece: 2 x 180 mm dia, on top of the machine housing External dimensions: without control cabinet 1750 mm wide, 1850 mm high, 1000 m...

Condition: excellent (used), Height-adjustable with lifting device and turning device Cjb Hb Hjr Hdx Rozvorb

Condition: used, Circulation machine WEINIG UNIVAR 10 as a spare parts carrier from a UC-Matic window system. * Year of construction: 1997 * Sutron BT20 control Csb Hb Hzelf H Sqovsrb * Machine incomplete * Details on request * Illustration similar.

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Width mit Auflage 2300 mm Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Crebjd Ih Hqs Hb Hzvob Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm OPTION: Longitudinal stops right / left with NC axis high / low programmatically, thus dimension input by folding / light measure possible, Dimension: LxWxH = 4.80 x 1.60 x 2.40 m - weight machine 1,500 kg (technical data according to manufacturer - without guarantee!)

Condition: used, for profiling and milling around windows, doors, individual parts and the like with surrounding profiles incl. return transport, Aggregates: 1st profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, 2. Profile milling unit, horizontally above, radially clocked at 2 positions, axially clocked at 2 positions, motor: 3 kW, 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, 4. Profile milling unit, vertical on the right, radial clocked on 2 positions, axial clocked on 3 positions, motor: 3 kW, 5. Profile milling unit, horizontally above, radially clocked at 8 positions, axially clocked at 2 positions, motor: 3 Cebslf H Sue Hb Hzverb kW.

Condition: new, Number of machnines - Loading meters, approx. - Total weight, approx. - Assembly line consisting of: Item 1.0 / 0610005 RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 Csbod Ih Hus Hb Hzvjrb 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2.0 / 10603200 RU-CSA-SMB aluminum holder screwing machine with automatic Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3.0 / 614-601 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel manually by pulling and pushing the load

Condition: used, for profiling and milling around windows, doors, individual parts and the like with surrounding profiles incl. mechanization for one-person operation, Aggregates: Crjb Hb Hslf H S Aszvjb 1st profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, synchronization device 2nd profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 hydraulic, 3. Profile milling unit, vertical right, radial clocked to 2 positions, axial clocked to 3 positions, motor: 3 kW, 4. Profile milling unit, horizontal below, radial clocked on 2 positions, axial clocked on 2 positions, motor: 3 kW, Milling carriage for narrow and short wings, Nexus PC control.

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 100 mm Z axis - 105 mm 1 drilling unit horizontal (dowel drilling unit left) Drilling motor 380 V, 1,100 W Clamping chuck d = 8/10 4,000 - 11,000 rpm can be adjusted 1 drilling unit vertically from above - fixed Drilling motor 1.1 KW, 3,000 rpm Quick change of the drill head 1 drill head BKF 2/3, quick-changeable, (corner bearing) On the loose part, hardware according to customer requirements including drill replacement Control: electro-pneumatic with three axes NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE compliant, with 1 set of drilling tools Dübo je 1xd = 6,8,10,14 + 2 Roughing cutter d = 16, 1 milling cutter d = 20, ready for connection 1 drill head BKF 3, fast exchangeable for olives including drill bit Fitting according to customer requirements Crebjd Ih Hys Hb Hzvjb 2 drilling units 1 x horizontal for drilling from above (for tapes) 1 x vertical for dowel work, right Drilling motor 1.100 Watt, infinitely variable 4,000 - 11,000 rpm with collet chuck ER 20 2 Milling units for lock boxes 1 x horizontal for tapes, lock boxes 1 x vertically from above for PZ, pushers, tapes Milling motor 2.2 KW Speed ??adjustable 3,000 - 16,000 rpm Clamping tool holder ER 25 1 length stop right and left, working length 2.8 m NC-controlled When the length stop is used, the fixed stops are removed. Dimension: LxBxH = 2.50 x 1.50 x 2.20 m - Weight machine 850 kg PowerDrill LxBxH = 0,30 x 0,30 x 6,00 m - Weight length stop 100 kg 1 Dübelleim- and press-in station consisting of: - Swing conveyor for dowels with feed -Dübeleinpressstation -High pressure glue pump made of stainless steel with glue container - Full jet valve for precise glue application Exhaust nozzle Price for 1 dowel diameter The basic machine will be about 300 mm longer (Technical data according to manufacturer - without guarantee!)

Condition: used, Electronic length stop Weinig for window production for positioning / feeding wood when sawing or similar. * Solid construction * Further technical data on request. Max. workpiece length approx.: 2.300 mm Dimensions LWH approx.:: 3.8 x 1.3 x 1.15 m Cjb Hb Hzjlf I Nuovorb Travel approx.:: 2.800 mm Travel distance approx.:: 2.800 mm

Condition: used, Assembly table for inserting fittings into window frames or similar. Table size approx: 1.8 x 2 m Table size approx.: 1.8 x 2 m Screwdriver holder: Yes holder for screwdriver: Yes Fold out: Yes Crjbslf H Smo Hb Hzvob foldable: Yes Boxes for fittings and screws: 8 boxes for fittings and screws: 8

Condition: used, Tapping and slot machine WEINIG UNITEC 10 as a spare parts carrier from a UC-Matic window system. * Year of construction: 1997 Cjb Holf H Sxob Hzvorb * Sutron BT20 control * Machine incomplete * Details on request.